日本的沙丘地及其农业利用

日本海岸地带原有沙丘地240000公顷,约占国土总面积的0.64％.早在17～18世纪日本就已开始在海岸地带造林固沙,至今几乎所有沙丘地都已固定并且被用作农田、房屋及工厂建设用地.本文介绍了日本海岸沙丘地农业利用现状.     

Numerical simulation of dynamic process of the Tangshan earthquake

In this paper, the new LDDA (Lagrangian Discontinuous Deformation Analysis) method is used in modeling the dynamic process of the MS=7.8 Tangshan earthquake on July 28, 1976 and obtain directly the dynamic and quasi-static dislocations, shear stress drops, fracture velocities of the Tangshan earthquake fault. The simulation shows that the slip history at each point of the fault is different. The displacement vectors at the concave side of the fault is greater than that of the convex side of the fault. The "over shoot" of the fault slip is greatest at the middle part of the fault and attenuates to its ends. The rupture velocities of the fault from the epicenter towards south-west and towards north-east are 3.08 m/s and 1.18 m/s, respectively, the average one is 2.13 m/s. The maximum dynamic and quasi-static dislocations are 7.1 m and 6.2 m respectively, the average quasi-static one on the fault is 4.5 m. The maximum dynamic and quasi-static shear stress drops are 8.1 MPa and 5.4 MPa, respectively, the average quasi-static shear stress drop is 3.9 MPa.We found that the rupture velocities and shear stress are related to the initial stress states of the fault.     

The possible influences of the increasing anthropogenic emissions in India on tropospheric ozone and OH

A 3-D chemical transport model (OSLO CTM2) is used to investigate the influences of the increasing anthropogenic emission in India. The model is capable of reproducing the observational results of the INDOEX experiment and the measurements in summer over India well. The model results show that when NOx and CO emissions in India are doubled, ozone concentration increases, and global average OH decreases a little. Under the effects of the Indian summer monsoon, NOx and CO in India are efficiently transported into the middle and upper troposphere by the upward current and the convective activities so that the NOx, CO, and ozone in the middle and upper troposphere significantly increase with the increasing NOx and CO emissions. These increases extensively influence a part of Asia, Africa, and Europe, and persist from June to September.     

What Happened in the Trans-North China Orogen in the Period 2560-1850 Ma？

The Trans-North China Orogen （TNCO） was a Paleoproterozic continent-continent collisional belt along which the Eastern and Western Blocks amalgamated to form a coherent North China Craton （NCC）. Recent geological, structural, geochemical and isotopic data show that the orogen was a continental margin or Japan-type arc along the western margin of the Eastern Block, which was separated from the Western Block by an old ocean, with eastward-directed subduction of the oceanic lithosphere beneath the western margin of the Eastern Block. At 2550-2520 Ma, the deep subduction caused partial melting of the medium-lower crust, producing copious granitoid magma that was intruded into the upper levels of the crust to form granitoid plutons in the low- to medium-grade granite-greeustone terranes. At 2530-2520 Ma, subduction of the oceanic lithosphere caused partial melting of the mantle wedge, which led to underplating of mafic magma in the lower crust and widespread mafic and minor felsic volcanism in the arc, forming part of the greenstone assemblages. Extension driven by widespread mafic to felsic volcanism led to the development of back-arc and/or intra-arc basins in the orogen. At 2520-2475 Ma, the subduction caused further partial melting of the lower crust to form large amounts of tonalitic-trondhjemitic-granodioritic （TTG） magmatism. At this time following further extension of back-arc basins, episodic granitoid magmatism occurred, resulting in the emplacement of 2360 Ma, -2250 Ma 2110-21760 Ma and -2050 Ma granites in the orogen. Contemporary volcano-sedimentary rocks developed in the back-arc or intra-are basins. At 2150-1920 Ma, the orogen underwent several extensional events, possibly due to subduction of an oceanic ridge, leading to emplacement of mafic dykes that were subsequently metamorphosed to amphibolites and medium- to high-pressure mafic granulites. At 1880-1820 Ma, the ocean between the Eastern and Western Blocks was completely consumed by subduction, and the dosing of the ocean led to the continent-arc-continent collision, which caused large-scale thrusting and isoclinal folds and transported some of the rocks into the lower crustal levels or upper mantle to form granulites or eclogites. Peak metamorphism was followed by exhumation/uplift, resulting in widespread development of asymmetric folds and symplectic textures in the rocks.     

Tonian Tectonic-Strata Regions and their Geological Significance in China

The continent of China developed through the coalescence of three major cratons(North China, Tarim and Yangtze) and continental micro-blocks through the processes of oceanic crust disappearance and acceretionary-collision of continental crusts. The strata of the Chinese continental landmass are subdivided into 12 tectonic-strata regions. Based on the composition of geological features among the three main cratons, continental micro-blocks and other major global cratons, their affinities can be preliminarily deduced during the Tonian period, using evidence from sedimentary successions, paleobiogeography, tectonic and magmatic events. The Yangtze and Tarim cratons show that they have close affinities during the assembly-dispersal milestone of the Rodinia Supercontinent. The sedimentary record and magmatic age populations in the blocks suggest that there was a widespread, intensive magmatic event that resulted from a subduction process during ～1000–820 Ma, related to continental rifting around the Yangtze and Tarim cratons. However, they differ greatly from the North China Craton. The continental micro-blocks in the Panthalassic Ocean could have some missing connection with the North China Craton that persisted until the Middle-Late Devonian. In contrast, the Alxa Block showed a strong affinity with the Tarim Craton. The revised Tonian paleogeography of the Rodinia Supercontinent is a good demonstration of how to show the relationship between the main cratons and the continental micro-blocks.     

On Palaeozoic Tectonics in the Alxa Region, Inner Mongolia, China

Two ophiolitic melange belts in the Late Carboniferous formations have been discovered recently in the Alxa region. One is in the Engger Us fault and possesses properties of oceanic crust. The other is in the Badain Jaran fault and shows properties of a back-arc basin. These two faults, together with the Yagan fault, constitute the important boundaries of tectonic units in the Alax region. The four tectonic units delimited by these faults are different in rock assemblages, metamorphism and geochemistry. They reflect the nature of tectonic environments in which they are found. The tectonic units may be traced and correlated to the eastern and western neighbouring areas. The formation and evolution process of the units and their interaction in the Alxa region may be described in terms of the evolution of the Palaeo-Mongolian Ocean and its continental margins.     

Magmatic Network Structure of Volcanic Rocks in the Shengli Oilfield, Eastern China

Types of polymerized molecular network structure and degree of bond breakdown for glass phases of magmatic inclusions and glassy matrix in volcanic rocks from the Shengli oilfield have been defined by the laser Raman spectroscopic investigation. There are significant differences in types of polymerized molecular network structure and degree of bond 'breakdown of the magmatic glass phases between the non-CO2 and COa gas pools: magmatic glass phases of fluid inclusions and matrix in volcanic rocks from the CO2 gas pool contain more sheet network molecules and have a greater degree of bond beakdown than those from the non-CO2 gas pool; and when gas bubbles occur in evolving magma, magma saturated with volatile components has more sheet network molecules. The results suggest the magma-degassing mechanism of the formation of CO2 gas pools in the Shengli oilfield.     

Application of RgMap system on digital regional geological survey

Digital geological mapping fundamentally broke through the traditional working pattern,successfully carried out the geological mapping digitalization.By using the RGMAP system to field digital geological mapping,the authors summarized the method of work and the work flow of the RGMAPGIS during the field geological survey.First,we prepared material,set up the PRB gallery,then put the geographic base map under the background maplayer and organizing the field hand map,forming the field factual datum map.At last,the geological space database is formed.     

Study on Effects of Building Morphology on Urban Boundary Layer Using an Urban Canopy Model

An urban canopy model is incorporated into the Nanjing University Regional Boundary Layer Model. Temperature simulated by the urban canopy model is in better agreement with the observation, especially in the night time, than that simulated by the traditional slab model. The coupled model is used to study the effects of building morphology on urban boundary layer and meteorological environment by changing urban area, building height, and building density. It is found that when the urban area is expanded, the urban boundary layer heat flux, thermal turbu- lence, and the turbulent momentum flux and kinetic energy all increase or enhance, causing the surface air temperature to rise up. The stability of urban atmospheric stratiˉcation is a?ected to diffierent extent at diffierent times of the day. When the building height goes up, the aerodynamic roughness height, zero plane displacement height of urban area, and ratio of building height to street width all increase. Therefore, the increase in building height results in the decrease of the surface heat flux, urban surface temperature, mean wind speed, and turbulent kinetic energy in daytime. While at night, as more heat storage is released by higher buildings,thermal turbulence is more active and surface heat flux increases, leading to a higher urban temperature. As the building density increases, the aerodynamic roughness height of urban area decreases, and the effect of urban canopy on radiation strengthens. The increase of building density results in the decrease in urban surface heat flux, momentum flux, and air temperature, the increase in mean wind speed, and the weakening of turbulence in the daytime. While at night, the urban temperature increases due to the release of more heat storage.