湖北分县MOS预报系统建立与评分

在T213L31数值模式产品释用基础上,设计计算并选用模式大气中分别与降水、地面气温和风场有天气学意义的线性化预报因子,采用Kalman滤波和相似-Kalman滤波,在湖北省及邻近范围,建立实时(逐日更新样本)多站点、多时次、多要素的统计MOS预报方程,做定点(分县)、定时(6小时分辨率)和定量降水与概率、地面气温和风场客观预报(MOS预报系统)."系统"经2005、2006年6-8月业务试验表明,各个MOS预报都具稳定性和具有一定的评分水平.从而表明,相似-Kalman滤波在一定程度上消去单纯Kalman滤波"预报滞后"效应,并实现用Kalman滤波或相似-Kalman滤波做定性、定量降水MOS预报,和做地面气温和风场MOS预报,且用了实时历史样本雨/晴预报准确率,当作有/无降水发生概率.     

Changes of multiple cropping in Huang-Huai-Hai agricultural region,China

Multiple cropping index (MCI) is the ratio of total sown area and cropland area in a region, which represents the regional time intensity of planting crops. Multiple cropping systems have effectively improved the utilization efficiency and production of cropland by increasing cropping frequency in one year. Meanwhile, it has also significantly altered biogeochemical cycles. Therefore, exploring the spatio-temporal dynamics of multiple cropping intensity is of great significance for ensuring food and ecological security. In this study, MCI of Huang-Huai-Hai agricultural region with intensive cropping practices was extracted based on a cropping intensity mapping algorithm using MODIS Enhanced Vegetation Index (EVI) time series at 500-m spatial resolution and 8-day time intervals. Then the physical characteristics and landscape pattern of MCI trends were analyzed from 2000–2012. Results showed that MCI in Huang-Huai-Hai agricultural region has increased from 152% to 156% in the 12 years. Topography is a primary factor in determining the spatial pattern dynamics of MCI, which is more stable in hilly area than in plain area. An increase from 158% to 164% of MCI occurred in plain area while there was almost no change in hilly area with single cropping. The most active region of MCI change was the intersection zone between the hilly area and plain area. In spatial patterns, landscape of multiple cropping systems tended to be homogenized reflected by a reduction in the degree of fragmentation and an increase in the degree of concentration of cropland with the same cropping system.     

An Engineering Computational Method of Calculating Wave Forces on the Mat and Platform''''s Sit-on-Bottom Stability

- In this paper, an engineering method is employed to calculate the horizontal and vertical wave forces on the mat of the submersible platform under Froude-Krylov hypothesis. According to some model tests, appropriate diffraction coefficients are selected. And the results of the formulae given in the paper agree satisfactorily with those experimental data now available. The proposed computational method is effective and convenient to use in evaluating the horizontal and vertical wave forces on the mat. An exmaple is also given in this paper. Finally, the effects of the vertical wave force on the platorm's sit-on-bottom stability are analyzed.     

Physical modeling of untrenched submarine pipeline instability

Wave-induced instability of untrenched pipeline on sandy seabed is a ‘wave–soil–pipeline’ coupling dynamic problem. To explore the mechanism of the pipeline instability, the hydrodynamic loading with U-shaped oscillatory flow tunnel is adopted, which is quite different from the previous experiment system. Based on dimensional analysis, the critical conditions for pipeline instability are investigated by altering pipeline submerged weight, diameter, soil parameters, etc. Based on the experimental results, different linear relationships between Froude number (Fr) and non-dimensional pipeline weight (G) are obtained for two constraint conditions. Moreover, the effects of loading history on the pipeline stability are also studied. Unlike previous experiments, sand scouring during the process of pipe’s losing stability is detected in the present experiments. In addition, the experiment results are compared with the previous experiments, based on Wake II model for the calculation of wave-induced forces upon pipeline. It shows that the results of two kinds of experiments are comparable, but the present experiments provide better physical insight of the wave–soil–pipeline coupling effects.     

强流脉冲电子束作用下金属纯Cu的微观结构状态——空位簇缺陷及表面微孔结构

利用强流脉冲(HCPEB)电子束技术对多晶纯Cu进行了辐照处理,并利用透射电镜对HCPEB诱发的空位簇缺陷进行了表征.实验结果表明,HCPEP辐照金属可在纯Cu表层诱发大量的过饱和空位,并形成四方形空位胞及空位型位错圈和堆垛层错四面体(SFT),HCPEB瞬间的加热和冷却诱发的幅值极大的应力和极高的应变导致的整个原子平面的位移是空位簇缺陷形成的主要原因.此外,扫描电镜分析表明HCPEB辐照可以在纯Cu表面形成高密度、弥散分布和尺寸细小的微孔.过饱和空位或空位团簇沿晶体缺陷向表面扩散、凝聚是表面微孔形成的根     

Hydraulic套管开窗工具在南海西部油田的首次应用

南海西部油田的涠洲11-1N-A12井是一口探边注水井,该井采用威德福公司最新型的液压磨铣套管开窗工具在9-5/8＂套管内进行开窗侧钻,仅用一趟钻就实现了定向、座挂、开窗、修窗和钻进新地层14.12 m,大大节约了钻井时间。介绍了威德福公司的Hydraulic套管开窗系统的组成部件及工具的优点,分析了如何在开窗作业过程中进行钻井参数控制,总结了关于工具的送入、脱手、定向和窗口质量控制等方面的一些经验,可以为以后类似井的套管开窗作业提供技术参考。     

Combining SAD/SIR iteration and MR iteration in partial-model extension of proteins

There are two kinds of dual-space partial-model extensions which involve the direct-method program OASIS. The first kind, named SAD/SIR iteration, uses SAD/SIR information, while the second kind, named molecular replacement (MR) iteration, does not use that information. In general, the SAD/SIR iteration is more powerful since more experimental information is used. However, in most cases when protein structures are solved with the molecular replacement method, SAD/SIR information is not available. Thus the MR iteration is particularly useful for the completion of models from molecular replacement. The SAD/SIR iteration will be automatically used in OASIS for data sets containing SAD/SIR signals, while the MR iteration will be dedicated to data sets without SAD/SIR signals. The present paper shows that for data containing SAD/SIR signals, a combination of SAD/SIR iteration and MR iteration could lead to significantly better results than that obtained from the SAD/SIR iteration alone.     

Elastic properties of spherically anisotropic piezoelectric composites

Effective elastic properties of spherically anisotropic piezoelectric composites, whose spherically anisotropic piezoelectric inclusions are embedded in an infinite non-piezoelectric matrix, are theoretically investigated. Analytical solutions for the elastic displacements and the electric potentials under a uniform external strain are derived exactly. Taking into account of the coupling effects of elasticity, permittivity and piezoelectricity, the formula is derived for estimating the effective elastic properties based on the average field theory in the dilute limit. An elastic response mechanism is revealed, in which the effective elastic properties increase as inclusion piezoelectric properties increase and inclusion dielectric properties decrease. Moreover, a piezoelectric response mechanism, of which the effective piezoelectric response vanishes due to the symmetry of spherically anisotropic composite, is also disclosed.     

An energy conversion system based on deep-sea pressure

A novel seawater pressure energy conversion system that utilizes seawater pressure to generate electricity has been studied in this paper. The energy conversion system utilizes the pressure difference between the pressurized seawater and the empty pressure container to drive hydraulic motor and the coaxially coupled generator to generate electric power. The output electric energy is recorded by the data logger throughout the process. In the current study, technical analysis is performed with the emphasis on conversion efficiency between seawater pressure energy and output electric energy. The analysis is conducted at various pressure differences through the throttle valve so as to obtain maximum conversion efficiency. Research shows that the optimum pressure difference through the throttle valve and the maximum conversion efficiency can be theoretically calculated when the properties of the conversion system are given. Simulation results have demonstrated the influence of pressure difference on conversion efficiency. The test apparatus has been designed, built and tested in 2004. It successfully generated electric energy of approximately 0.85 kW h at the depth of 2400 m with empty pressure container's holding capacity of 200 L in the voyage “DY105-16” in South China Sea on June 12, 2004. The actual conversion efficiency from seawater pressure energy to electric energy reaches as high as 63.8% which is attractive for underwater equipments. The success of the experiment has tested the feasibility of utilizing seawater pressure energy and brings a new power supply way for long-term in-situ underwater equipments.     

Effects of Light,Salinity and Temperature on Germination Characteristics of Surfgrass,Phyllospadix japonicus and P. iwatensis Seeds

Ocean Science Journal - Surfgrass (Phyllospadix spp.) is a marine flowering plant that attaches to the bedrock of the Pacific Ocean, where the tide is fast and the waves are strong. In Korea, two...