Cu–Mo Differential Mineralization Mechanism of the Dabate Polymetallic Deposit in Western Tianshan,NW China: Evidence from Geology,Fluid Inclusions,and Oxygen Isotope Systematics

Classic porphyry Cu–Mo deposits are mostly characterized by close temporal and spatial relationships between Cu and Mo mineralization. The northern Dabate Cu–Mo deposit is a newly discovered porphyry Cu–Mo polymetallic deposit in western Tianshan, northwest China. The Cu mineralization postdates the Mo mineralization and is located in shallower levels in the deposit, which is different from most classic porphyry Cu–Mo deposits. Detailed field investigations, together with microthermometry, laser Raman spectroscopy, and O‐isotope studies of fluid inclusions, were conducted to investigate the origin and evolution of ore‐forming fluids from the main Mo to main Cu stage of mineralization in the deposit. The results show that the ore‐forming fluids of the main Mo stage belonged to an NaCl + H₂O system of medium to high temperatures (280–310°C) and low salinities (2–4 wt% NaCl equivalent (eq.)), whereas that of the main Cu stage belonged to an F‐rich NaCl + CO₂ + H₂O system of medium to high temperatures (230–260°C) and medium to low salinities (4–10 wt% NaCl eq.). The δ¹⁸O values of the ore‐forming fluids decrease from 3.7–7.8‰ in the main Mo stage to ?7.5 to ?2.9‰ in the main Cu stage. These data indicate that the separation of Cu and Mo was closely related to a large‐scale vapor–brine separation of the early ore‐forming fluids, which produced the Mo‐bearing and Cu‐bearing fluids. Subsequently, the relatively reducing (CH₄‐rich) Mo‐bearing, ore‐forming fluids, dominantly of magmatic origin, caused mineralization in the rhyolite porphyry due to fluid boiling, whereas the relatively oxidizing (CO₂‐rich) Cu‐bearing, ore‐forming fluids mixed with meteoric water and precipitated chalcopyrite within the crushed zone at the contact between rhyolite porphyry and wall rock. We suggest that the separation of Cu and Mo in the deposit may be attributed to differences in the chemical properties of Cu and Mo, large‐scale vapor–brine separation of early ore‐forming fluids, and changes in oxygen fugacity.     

顶板诱导崩落模式选择时变数值分析

顶板诱导崩落是一种新的空区处理技术,其实施效果与诱导崩落施工路径、方法和顺序有关,同时矿岩体作为一种弹塑性体,具有非线性时变力学特征。运用时变力学的基本理论,建立了顶板诱导崩落的时变力学有限元基本方程。针对大厂铜坑矿92号矿体试验采场的地质特征,构建了顶板诱导崩落的时变力学有限元模型,采用多步骤开挖模拟两种不同顶板诱导崩落模式,研究两种不同工序的顶板塑性区发展、东西预裂与崩顶硐室的位移及其安全系数,分析了其对采场的综合效应。结果表明,先预裂后崩顶的顶板诱导崩落模式有利于顶板崩落诱导,并综合考虑诱导崩落效果与作业安全,建议采用先预裂爆破后强制崩顶的微差爆破一次成型工艺。     

支盘灌注桩单桩承载力试验研究

通过对支盘灌注桩受力机理的分析 ,结合郑州某工程支盘灌注桩试桩资料 ,利用不同的估算方法 ,对支盘灌注桩单桩承载力进行了进一步的研究。     

MTA固井技术在煤层气井中应用的实验研究

MTA固井技术在油气田中的运用已经取得了显著效果,能够提高二界面的抗剪切强度以及抵抗地层水对二界面的冲蚀。通过室内实验,对MTA固井技术在煤层气井中的运用进行探索。实验结果表明,MTA技术在煤层气井的固井模拟实验中,也能够有效的提高二界面的抗剪切强度,实现二界面的整体固化胶结,抵抗地层水对煤层气二界面的冲蚀,这些特点对于提高煤层气井的产能具有重要意义。作为一种施工简捷、效果显著的固井技术,MTA固井方法在煤层气井中的应用前景是极为广阔的。     

An efficient solution of real-time data processing for multi-GNSS network

Global navigation satellite systems (GNSS) are acting as an indispensable tool for geodetic research and global monitoring of the Earth, and they have been rapidly developed over the past few years with abundant GNSS networks, modern constellations, and significant improvement in mathematic models of data processing. However, due to the increasing number of satellites and stations, the computational efficiency becomes a key issue and it could hamper the further development of GNSS applications. In this contribution, this problem is overcome from the aspects of both dense linear algebra algorithms and GNSS processing strategy. First, in order to fully explore the power of modern microprocessors, the square root information filter solution based on the blocked QR factorization employing as many matrix–matrix operations as possible is introduced. In addition, the algorithm complexity of GNSS data processing is further decreased by centralizing the carrier-phase observations and ambiguity parameters, as well as performing the real-time ambiguity resolution and elimination. Based on the QR factorization of the simulated matrix, we can conclude that compared to unblocked QR factorization, the blocked QR factorization can greatly improve processing efficiency with a magnitude of nearly two orders on a personal computer with four 3.30 GHz cores. Then, with 82 globally distributed stations, the processing efficiency is further validated in multi-GNSS (GPS/BDS/Galileo) satellite clock estimation. The results suggest that it will take about 31.38 s per epoch for the unblocked method. While, without any loss of accuracy, it only takes 0.50 and 0.31 s for our new algorithm per epoch for float and fixed clock solutions, respectively.     

西天山巨型金铜铅锌成矿带构造成矿演化和找矿方向

西天山产有Muruntau、Kumtor、Kalmakyr等巨型金矿床和Kalmakyr、Dal'neye等世界级铜矿床以及Tekeli等超大型铅锌矿床,构成世人瞩目的巨型金铜铅锌成矿带.新疆西天山金、铜、铅锌矿找矿面临重大突破,不断认识乌兹别克斯坦—吉尔吉斯斯坦—哈萨克斯坦东南部—中国新疆西部整个西天山的构造成矿过程,明确新疆西天山金、铜、铅锌矿重大找矿突破方向,预测大型矿集区十分必要.本文通过境内外野外地质矿产广泛调研和对相关文献综合研究,认为西天山造山带形成演化经历前寒武纪古陆边缘裂陷盆地、古生代洋-陆俯冲增生、晚古生代陆-陆碰撞造山、中—新生代坳陷盆地四个主要地质过程,造就出四类重要成矿系统和类型:①元古宙边缘裂陷盆地铅锌成矿系统SEDEX型;②古生代俯冲岛弧金铜铅锌成矿系统斑岩-矽卡岩-浅成低温热液型;③晚古生代碰撞造山金铅锌成矿系统造山型-MVT;④中—新生代坳陷盆地铅锌铜成矿系统砂岩型.综合对比西天山境内外成矿系统地质发育特点,预测新疆西天山那拉提-额尔宾中天山隆起带是造山型金矿找矿重大突破区,吐拉苏盆地和巴音布鲁克中天山以及那拉提山北坡有望实现斑岩型金铜找矿突破,伊犁地块南缘元古宇SEDEX型铅锌找矿值得关注,山间/山前盆地无疑是砂岩型铅锌铜找矿优先选择.     

Assessing rockfall susceptibility in steep and overhanging slopes using three-dimensional analysis of failure mechanisms

Rockfalls strongly influence the evolution of steep rocky landscapes and represent a significant hazard in mountainous areas. Defining the most probable future rockfall source areas is of primary importance for both geomorphological investigations and hazard assessment. Thus, a need exists to understand which areas of a steep cliff are more likely to be affected by a rockfall. An important analytical gap exists between regional rockfall susceptibility studies and block-specific geomechanical calculations. Here we present methods for quantifying rockfall susceptibility at the cliff scale, which is suitable for sub-regional hazard assessment (hundreds to thousands of square meters). Our methods use three-dimensional point clouds acquired by terrestrial laser scanning to quantify the fracture patterns and compute failure mechanisms for planar, wedge, and toppling failures on vertical and overhanging rock walls. As a part of this work, we developed a rockfall susceptibility index for each type of failure mechanism according to the interaction between the discontinuities and the local cliff orientation. The susceptibility for slope parallel exfoliation-type failures, which are generally hard to identify, is partly captured by planar and toppling susceptibility indexes. We tested the methods for detecting the most susceptible rockfall source areas on two famously steep landscapes, Yosemite Valley (California, USA) and the Drus in the Mont-Blanc massif (France). Our rockfall susceptibility models show good correspondence with active rockfall sources. The methods offer new tools for investigating rockfall hazard and improving our understanding of rockfall processes.     

沉积物粒度分析方法的比较

近年来激光粒度分析法在沉积物粒度分析方面的应用得到了进一步扩展。本文利用美国麦克奇公司生产的S3500型激光粒度分析仪开展沉积物粒度分析方法实验,研究表明:S3500型仪器较优的样品用量约为0.2 g;稀释过程会影响样品的粒度分布;样品分取方式会带来不同的随机误差。与薄片图像法和筛析法两种传统粒度分析方法获得的粒度分布参数比较表明:激光法测得的平均粒径较薄片图像法和筛析法偏细;激光法和筛析法的峰度相关性较好。采用Malvern 2000和Micro S3500两种激光粒度分析仪测量结果的比较表明:Malvern 2000测得的平均粒径较Micro S3500测得的平均粒径偏细,但二者的相关性很好(r=0.9574),研究认为这两种粒度仪的测试结果会给岩石粒度定名带来差异。由于各种粒度分析方法存在差异和局限性,在实际工作中粒度分析应尽可能建立在同一测量体系上,以便资料对比。     

红外光谱/扫描电镜等现代大型仪器岩石矿物鉴定技术及其应用

传统的光学显微镜由于分辨率、放大倍数的限制,对于细微颗粒的定性分析不准确,矿物的定量分析存在一定的误差,对纳米-微米级矿物形貌及结构特征的观察束手无策。随着油气勘探及地质找矿的不断深入,需要提供岩石中所有矿物、孔隙及微量元素的信息,因此整合傅里叶红外光谱仪、X射线衍射仪、拉曼光谱仪、扫描电镜的优点,建立以大型仪器为基础的岩石矿物鉴定方法是当前地质工作的需要。红外光谱光谱范围为7500~370 cm-1,能对固、液、气样品中含量高于30%的矿物进行快速、准确的定性分析;主要用于有机质分析,其次还可对部分具有极性键的无机化合物及金属氧化物进行分析。X射线衍射仪能快速地对样品中含量大于15%的矿物进行较为准确的定量分析;现今主要用于各类晶质矿物的定性分析,同时也可对碳酸盐岩矿物等不含水矿物进行定量分析。拉曼光谱仪光谱范围为200~1000 nm,空间分辨率为横向0.5μm、纵向2μm,通过对包裹体进行测试能直接获得成岩过程中的温度、压力、流体成分等信息;目前主要用于流体包裹体成分的测试,其次还可对分子极化度会发生变化的液态、粉末及固体样品进行定性分析。扫描电镜分辨率达到1 nm,能清晰地观察到纳米-微米级矿物的形貌特征及矿物的结构特征;主要用于纳米-微米级的任何非磁性固体矿物的形貌及相关关系的观察。通过大型仪器建立的岩石矿物鉴定方法具有更高的分辨率,显著地提高了岩矿鉴定的精准度,大大拓宽了岩矿鉴定的范围(如鉴定纳米/微米级的矿物、矿物的不同变种等),能够全面、精准地提供岩石矿物的矿物含量和矿物组成、客观准确的成岩作用信息、清晰的矿物微观形貌及结构特征,而且仪器功能相互重叠,测试结果相互验证,保证了测试结果的可靠性。与传统光学显微镜鉴定方法相比,现代大型仪器岩石矿物鉴定技术为揭示矿物间的共生、反应、演化、岩石的成因、沉积/成岩环境等提供了依据,为地质工作提供准确、全面的矿物定性定量、组构特征及成岩作用等信息,为地质工作的顺利完成奠定了坚实的基础。     

Pressure Solution of Sulphides in Some Massive Sulphide Zinc—lead Deposits of Western Canada：Its Significance in Mobilization of Ore—forming Materials

Pressure solution is a common phenomenon in massive sulphide zinc-lead deposits of western Canada and may have been an important factor leading to the mobilization of ore-forming materials during diagenesis, deformation and metamorphism of sedimentary ores.The control of ductile shear zones over gold mineralization could be explained in view of pressure solution of gold-bearing miner-als under shearing stress and the tesultant mobilization of this metal.