Experimental phase and melting relations of metapelite in the upper mantle: implications for the petrogenesis of intraplate magmas

We performed a series of piston-cylinder experiments on a synthetic pelite starting material over a pressure and temperature range of 3.0–5.0 GPa and 1,100–1,600°C, respectively, to examine the melting behaviour and phase relations of sedimentary rocks at upper mantle conditions. The anhydrous pelite solidus is between 1,150 and 1,200°C at 3.0 GPa and close to 1,250°C at 5.0 GPa, whereas the liquidus is likely to be at 1,600°C or higher at all investigated pressures, giving a large melting interval of over 400°C. The subsolidus paragenesis consists of quartz/coesite, feldspar, garnet, kyanite, rutile, ±clinopyroxene ±apatite. Feldspar, rutile and apatite are rapidly melted out above the solidus, whereas garnet and kyanite are stable to high melt fractions (>70%). Clinopyroxene stability increases with increasing pressure, and quartz/coesite is the sole liquidus phase at all pressures. Feldspars are relatively Na-rich [K/(K + Na) = 0.4–0.5] at 3.0 GPa, but are nearly pure K-feldspar at 5.0 GPa. Clinopyroxenes are jadeite and Ca-eskolaite rich, with jadeite contents increasing with pressure. All supersolidus experiments produced alkaline dacitic melts with relatively constant SiO₂ and Al₂O₃ contents. At 3.0 GPa, initial melting is controlled almost exclusively by feldspar and quartz, giving melts with K₂O/Na₂O ~1. At 4.0 and 5.0 GPa, low-fraction melting is controlled by jadeite-rich clinopyroxene and K-rich feldspar, which leads to compatible behaviour of Na and melts with K₂O/Na₂O ≫ 1. Our results indicate that sedimentary protoliths entrained in upwelling heterogeneous mantle domains may undergo melting at greater depths than mafic lithologies to produce ultrapotassic dacitic melts. Such melts are expected to react with and metasomatise the surrounding peridotite, which may subsequently undergo melting at shallower levels to produce compositionally distinct magma types. This scenario may account for many of the distinctive geochemical characteristics of EM-type ocean island magma suites. Moreover, unmelted or partially melted sedimentary rocks in the mantle may contribute to some seismic discontinuities that have been observed beneath intraplate and island-arc volcanic regions.     

Numerical forward modelling of peritidal carbonate parasequence development: implications for outcrop interpretation

The mechanisms responsible for formation of peritidal parasequences have been a focus of debate between proponents of contrasting autocyclic and allocyclic models. To contribute to this debate a three‐dimensional numerical forward model of carbonate production, transport and deposition has been developed. Shallowing‐upward parasequences are produced in the model via carbonate island formation and progradation, with an element of self‐organization, and no external forcing. These autocyclic parasequences have characteristics comparable with peritidal parasequences observed in outcrop. Modelled parasequence thickness and duration depend primarily on subsidence rate and sediment transport rate, illustrating the significance of sediment flux in formation of peritidal parasequences. Adding an element of stochastic variation of sediment transport rate and transport path leads to formation of nonuniform‐thickness parasequences that generate Fischer plots showing apparent hierarchies similar to those often interpreted as evidence of eustatic forcing. The model results do not rule out allocylic mechanisms, but suggest that shoreline and island progradation are also plausible mechanisms to create variable‐thickness, shallowing‐upward peritidal parasequences and should be considered in interpretations of such strata.     

Rates of rock surface lowering,Princess Elizabeth land,Eastern Antarctica

A series of micro-erosion-meter sites on different rock types and in differing wind regimes was established and re-read after four years on two sites in the Larsemann and Vestfold Hills. These two oases in Eastern Antarctica are subjected to both wind abrasion and salt wedging. The measurements displayed bimodal distributions, indicating that both abrasion and single-grain detachment could be observed. Surface lowering rates of 0·015 and 0·022 mm a^?1 were demonstrated for the Larsemann and Vestfold Hills, respectively.     

Sulfur geochemistry of hydrothermal waters in Yellowstone National Park,Wyoming, USA. III. An anion-exchange resin technique for sampling and preservation of sulfoxyanions in natural waters

A sampling protocol for the retention, extraction, and analysis of sulfoxyanions in hydrothermal waters has been developed in the laboratory and tested at Yellowstone National Park and Green Lake, NY. Initial laboratory testing of the anion-exchange resin Bio-Rad™ AG1-X8 indicated that the resin was well suited for the sampling, preservation, and extraction of sulfate and thiosulfate. Synthetic solutions containing sulfate and thiosulfate were passed through AG1-X8 resin columns and eluted with 1 and 3 M KCl, respectively. Recovery ranged from 89 to 100%. Comparison of results for water samples collected from five pools in Yellowstone National Park between on-site IC analysis (U.S. Geological Survey mobile lab) and IC analysis of resin-stored sample at SUNY-Stony Brook indicates 96 to 100% agreement for three pools (Cinder, Cistern, and an unnamed pool near Cistern) and 76 and 63% agreement for two pools (Sulfur Dust and Frying Pan). Attempts to extract polythionates from the AG1-X8 resin were made using HCl solutions, but were unsuccessful. Bio-Rad™ AG2-X8, an anion-exchange resin with weaker binding sites than the AG1-X8 resin, is better suited for polythionate extraction. Sulfate and thiosulfate extraction with this resin has been accomplished with KCl solutions of 0.1 and 0.5 M, respectively. Trithionate and tetrathionate can be extracted with 4 M KCl. Higher polythionates can be extracted with 9 M hydrochloric acid. Polythionate concentrations can then be determined directly using ion chromatographic methods, and laboratory results indicate recovery of up to 90% for synthetic polythionate solutions using AG2-X8 resin columns.     

Noble gas and halogen evidence for the origin of Scandinavian sandstone-hosted Pb-Zn deposits

Fluid origins in the sandstone-hosted Pb-Zn class of ore deposit have been investigated in three deposits from Scandinavia; Laisvall, Vassbo and Osen. The deposits studied are hosted by autochthonous Cambrian sandstones that preserve a near original structural relationship to the underlying Precambrian basement, enabling the role of basement interaction to be assessed.Mineral samples have been collected from across the paragenetic sequence: sphalerite, galena, pyrite, fluorite and barite, of impregnation and related joint-hosted mineralization. Fluid-inclusion halogen (Cl, Br and I) and noble gas isotope (⁴⁰Ar, ³⁶Ar, ⁸⁴Kr) compositions were determined simultaneously by noble gas mass spectrometry of irradiated sample splits. Complementary He isotope analyses are obtained from nonirradiated splits of the same samples.³He/⁴He values at Laisvall and Osen are highly radiogenic, 0.02 Ra, and the ⁴He/⁴⁰Ar* ratio extends to values greater than the crustal production value of 5, characteristic of low-temperature crustal fluids. At Vassbo, a slightly elevated ³He/⁴He ratio of 0.1-0.3 Ra is compatible with a very minor mantle component (1%-4%) suggesting a distal source for the basinal brine-dominated fluid.Br/Cl molar ratios 3.2-8.2 × 10⁻³ are greater than the present seawater value of 1.54 × 10⁻³ and correspond with I/Cl molar ratios in the range 64-1600 × 10⁻⁶. The upper limits of both the I/Cl and Br/Cl values are amongst the highest measured in crustal fluids. Together, the data indicate acquisition of salinity by the evaporation of seawater beyond the point of halite saturation and subsequent fluid interaction with I-rich organic matter in the subsurface. The data are compatible with the independent transport of sulfate and sulfide and indicate that fluids responsible for joint-hosted mineralization were distinct to those responsible for impregnation mineralization.All three deposits preserve fluids with ⁴⁰Ar/³⁶Ar in the range of 6,000-10,000 and fluid inclusion ⁴⁰Ar* concentrations of >0.02-0.05 cm³cm⁻³. Fluid-inclusion ⁴He concentrations are also extremely elevated with maximum values of ∼0.1 cm³cm⁻³ in Laisvall fluorite and sphalerite. The high ⁴⁰Ar/³⁶Ar values, together with the high ⁴He and ⁴⁰Ar* concentrations, result from a very long premineralization crustal residence time on the order of 100-200 Ma.Together, the noble gas and halogen data are compatible with a Caledonian mineralization event (∼425 Ma) caused by mixing of two or more, long-lived, hydrothermal basinal brines and pore fluids at the sites of mineralization. The data suggest negligible recharge of the basinal brines by meteoric water and indicate extensive fluid-basement interaction before mineralization. The similar noble gas composition of each deposit, suggests that similar processes operated at all three deposits and favors a single-pass fluid-flow model for mineralization.     

Bar-top hollows: A new element in the architecture of sandy braided rivers

Discrete hollows in the bar tops of the South Saskatchewan River are described that form a newly-recognized morphological element of sandy braided rivers. These bar-top hollows, which are up to 1.7 m deep and may extend for 10–30 m down and across flow, have a circular to ovoid planform and are shown, through use of ground penetrating radar, to be filled by a series of distinct, often angle-of-repose, foresets. The hollows form by both erosion and bar-top deposition and may be generated by bar-tail accretion, cross-bar channel cutoff and subsequent fill or lateral accretion at the bar-head. Bar-top hollows occur in the upper part of the bar depositional sequence and may thus prove useful indicators for braid bar reconstruction in ancient sediments, and should not be confused with channel scour.     

Measurement of water content as a control of particle entrainment by wind

Of all controls on particle transport by wind, which include texture, crusting, vegetation cover and roughness, the role of water content is one of the most difficult to parameterize because of its high degree of spatial and temporal variability and its operation at a particle‐scale level directly at the surface. This study demonstrates that measurement of the distribution of brightness for all pixels in an image, now routinely employed in digital photography, is strongly correlated with gravimetric water content. Wind tunnel experiments further suggest that measurement of the distribution of β, as normalized against the brightness of the dry sand surface, is very useful in determining the order of magnitude of the mass transport rate (q). Finer resolution will likely never be achieved because of the heterogeneity of the particle transport phenomenon. Analysis of the variability in surface brightness does suggest that q is governed by the partitioning of momentum to particle motion that terminates in adhesion to surrounding areas of the surface that remain relatively wet. The proportion of surface particles that becomes dry appears to be of less importance. Preliminary work suggests that field application of digital photography in tracking spatial and temporal changes in the water content of beach deposits looks promising. Copyright © 2006 John Wiley & Sons, Ltd.     

Damage to structures by pyroclastic flows and surges, inferred from nuclear weapons effects

In order to define the risk from explosive eruptions, one must constrain both the probability of explosive events and the effects, or consequences, of those events. This paper focuses on the effects of pyroclastic flows and surges (here termed ‘pyroclastic density currents', or PDCs) on buildings, infrastructure elements, and to some extent on vehicles. PDCs impart a lateral force to such structures in the form of dynamic pressure, which depends on the bulk density of the PDC (which in turn depends mainly on particle concentration) and its velocity. For reasonable ranges of particle concentration (10⁻³ to 0.5) and velocities (10 to 300 m/s), dynamic pressure on the upstream face of a structure ranges from 0.1 kPa to 10⁴ kPa. Lateral loads ranging up to about 100 kPa were produced during nuclear weapons tests in the 1940s and 1950s that were designed to study the effects of such loading on a variety of structures for civil defense and emergency response purposes in the event of nuclear war. Although considerable simplifications are involved, the data from these weapon tests provide useful analog information for understanding the effects of PDCs. I reviewed data from the nuclear tests, describing the expected damage from different loadings. Tables are provided that define the response of different structural elements (e.g., windows, framing, walls) and whole structures to loading in probabilistic terms, which in principle account for variations in construction quality, orientation, and other factors. Finally, damage documented from historical eruptions at Mt. Lamington (1951), Herculaneum (AD 79 Vesuvius eruption), and St. Pierre (1902 Mt. Pelee eruption) is reviewed. Damage patterns, combined with estimates of velocity, provide an independent estimate of particle concentration in the PDCs. Details of structural damage should be recorded and mapped around future eruptions in order to help refine this aspect of consequence analysis. Another fruitful approach would be to combine numerical simulations of eruption scenarios, which can produce simulated maps of dynamic pressure, with GIS-based data on structures for a given region; the result would be predictions of consequences that could be used for planning and emergency response training.