Magnetostratigraphic correlation of the Oxfordian–Kimmeridgian boundary

A magnetic polarity pattern for Boreal and Sub-Boreal ammonite zones of the Upper Oxfordian to Lower Kimmeridgian was established and confirmed in four British sections, including the proposed Global Boundary Stratotype Section and Point (GSSP) on the Isle of Skye (Scotland) to define the base of the international Kimmeridgian Stage. A coeval pattern for Sub-Mediterranean ammonite zones was compiled from seven sections in Poland, one German section and multi-section composites from France and Spain. The mean paleopole for the European Craton (excluding Spain) at the Oxfordian–Kimmeridgian boundary is 74.2°N, 181.3°E (Α₉₅ = 3.8°). The common magnetic polarity scale enables inter-correlation of ammonite subzones among these three faunal provinces and to the marine magnetic-anomaly M-Sequence. The proposed GSSP at the base of the Pictonia baylei Zone is near the base of an extended interval dominated by reversed polarity, which is interpreted to be Chron M26r. This GSSP level projects to the lower to middle part of the Epipeltoceras bimammatum Subzone, which is the middle subzone of this E. bimammatum Zone in the Sub-Mediterranean standard zonation. In contrast, the traditional placement of the Oxfordian–Kimmeridgian boundary in that Sub-Mediterranean standard zonation (base of Sutneria platynota Zone) is at the base of Chron M25r, or nearly 1 million years younger.     

Effects of sampling effort on the estimation of spatial gradients in a tropical reservoir impacted by an oil refinery

We investigated the effects of increase in sampling effort (30-1043 sampling points) on the accuracy of assessment of the spatial patterns of surface-water quality in a eutrophic tropical reservoir. The investigation was carried out during the dry season, when previous investigations showed that the spatial heterogeneity is more stable. A multi-parameter Yellow Springs Instruments probe coupled to a TechGeo D-GPS was used. This system is equipped to measure and store in a continuous recording mode, several physical and chemical parameters linked to geographical coordinates obtained with a precision of less than 1 m. We used different geostatistical approaches to determine the optimal number of sampling points required to reflect the real spatial patterns of water quality in the system. This approach was tested in a small tropical reservoir (Ibirité) that receives effluents from an oil refinery (the state-owned REGAP oil refinery, PETROBRAS) located near the city of Belo Horizonte. The study showed not only that the spatial patterns of water quality are significantly affected by sampling effort but also it was demonstrated that the establishment of an adequate sampling program is a critical point for the precise identification of source points of pollution. The results of this investigation enabled us to demonstrate the potential uses and limits of this method for rapid assessment of the water quality of lakes and reservoirs that receive external inputs of water contaminants or nutrients.     

Accuracy assessment of the Mexican National Forest Inventory map: A study in four ecogeographical areas

The accuracy of the Mexican National Forest Inventory (NFI) map is derived in four distinct ecogeographical areas, using an assessment design tailored for the project. A main achievement of the design was to integrate the high diversity of classes encompassed at the most detailed subcommunity level of the classification scheme within a cost‐controlled statistically sound assessment. A hybrid double sampling strategy was applied to the 2.5 million‐ha study area. A total of 5955 reference sites were verified against their NFI map label. The availability of detailed quasi‐synchronous reference data for the 2000 Landsat‐derived NFI and the high diversity of mapped classes allowed a careful thematic analysis on the selected regions, relevant for national extrapolation. Global accuracy estimates of 64–78 per cent were registered among the four ecogeographical areas (two with mainly temperate climate and the other two with mainly tropical climate), with the lower accuracy levels found in areas more densely covered with forests. According to the estimates, the NFI map tends to underestimate the presence of temperate forest (especially oak) and overestimate the presence of tropical forest in the areas investigated. The analysis of confusions reveals difficulties in unambiguously interpreting or labelling forests with secondary vegetation, herbaceous and/or shrub‐like vegetation as well as distinguishing between aquatic vegetation types. The design proved useful from the perspective of accuracy assessments of regional maps in biodiverse regions.     

The significance of transparent exopolymeric particles in the vertical distribution of bacteria and heterotrophic nanoflagellates in Lake Pavin

The abundance, size distribution, and bacterial colonization of Transparent Exopolymeric Particles (TEP) were examined in two consecutive years during the spring diatom development throughout the water column of the deep meromictic Lake Pavin, France. TEP concentrations ranged from 1.9 to 13.4 × 10⁵ particles l⁻¹ and their distribution and size spectra indicated that these particles are the main factor in governing the transport of diatoms to the deep hypolimnion of the lake. The majority of TEP was colonized by bacteria that constituted 0.4–8.9% of total DAPI-stained bacteria. The intensity of bacterial colonization was strongly related to temperature and decreased with particle size. A more important colonization of small particles in the hypolimnion during thermal stratification suggested that bacterial colonisation also increased with the age of the particle. The abundance of heterotrophic nanoflagellates (HNF) was more significantly related to the density of particles than to the density of total bacteria and the intensity of bacterial colonization of TEP. Our results therefore suggest that TEP are a more important factor for HNF development than attached and free bacteria. We conclude that TEP are involved not only in sedimentation processes but also in the dynamics of bacteria and protozoa in freshwater pelagic environments.     

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

We describe the time discretization of a three-dimensional baroclinic finite element model for the hydrostatic Boussinesq equations based upon a discontinuous Galerkin finite element method. On one hand, the time marching algorithm is based on an efficient mode splitting. To ensure compatibility between the barotropic and baroclinic modes in the splitting algorithm, we introduce Lagrange multipliers in the discrete formulation. On the other hand, the use of implicit–explicit Runge–Kutta methods enables us to treat stiff linear operators implicitly, while the rest of the nonlinear dynamics is treated explicitly. By way of illustration, the time evolution of the flow over a tall isolated seamount on the sphere is simulated. The seamount height is 90% of the mean sea depth. Vortex shedding and Taylor caps are observed. The simulation compares well with results published by other authors.     

Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames

Aimed at investigating the effect of openings on the in‐plane behaviour of masonry infills in reinforced concrete frames, a parametric study is presented based on model calibration via experimental tests. Two types of openings are investigated: central window openings and different combinations of door and window openings based on the typologies of southern European countries. First, a finite element model of the structure is made using the DIANA software program. Then, after calibration with experimental results, a parametric analysis is carried out to investigate the effect of the presence and location of the different types of openings on the in‐plane behaviour of the infilled frame. Finally, different equations for predicting the initial stiffness and lateral strength of infilled frames with any types of openings were obtained. An α factor related to the geometry of the piers between openings is proposed to take into account the location of the openings in the developed equations. Subsequently, the masonry infill panel is replaced by a diagonal strut. An empirical equation is also proposed for the width of an equivalent strut to replace a masonry infill panel with openings in such a way that they possess the same initial stiffness. Copyright © 2015 John Wiley & Sons, Ltd.     

Closed Basin Brine Evolution and the Influence of Ca–Cl Inflow Waters: Death Valley and Bristol Dry Lake California, Qaidam Basin, China, and Salar de Atacama, Chile

Diagenetic-hydrothermal brines, here called “hydrothermal Ca–Cl brines,” have compositions that reflect interactions between groundwaters and rocks or sediments at elevated temperatures. Hydrothermal Ca–Cl brines reach the surface by convection-driven or topographically driven circulation, and discharge as springs or seeps along fault zones to become important inflow waters in many tectonically active closed basins. Case studies from (1) Qaidam Basin, China, (2) Death Valley, California, (3) Salar de Atacama, Chile, and (4) Bristol Dry Lake, California illustrate that hydrothermal Ca–Cl inflow waters have influenced brine evolution in terms of major ion chemistries and mineral precipitation sequences. All four basins are tectonically active; three (Death Valley, Salar de Atacama, and Qaidam Basin) have well-documented Ca–Cl spring inflow and Holocene faulting. Bristol Dry Lake has young volcanic deposits and Salar de Atacama has an active stratovolcano on its eastern margin, indicating subsurface magma bodies. A midcrustal magma chamber has been identified in southern Death Valley. Volcanism and faulting in these closed basins provides the heat source for hydrothermal-diagenetic processes and the energy and pathways to deliver these waters to the surface.     

Experimental investigation on the seismic performance of masonry buildings using shaking table testing

Masonry buildings worldwide exhibited severe damage and collapse in recent strong earthquake events. It is known that their brittle behavior, which is mainly due to the combination of low tensile strength, large mass and insufficient connection between structural elements, is the main limitation for their structural implementation in residential buildings. A new construction system for masonry buildings using concrete blocks units and trussed reinforcement is presented here and its seismic behavior is validated through shaking table tests. Dynamic tests of two geometrically identical two-story reduced scale (1:2) models have been carried out, considering artificial accelerograms compatible with the elastic response spectrum defined by the Eurocode 8. The first model was reinforced with the new proposed system while the second model was built with unreinforced masonry. The experimental analysis encompasses local and global parameters such as cracking patterns, failure mechanisms, and in-plane and out-of-plane behavior in terms of displacements and lateral drifts from where the global dynamic behavior of the two buildings is analyzed comparatively. Finally, behavior factors for the design recommendations in case of unreinforced masonry are also evaluated.     

Energetic Charged Particles Above Thunderclouds

The French government has committed to launch the satellite TARANIS to study transient coupling processes between the Earth’s atmosphere and near-Earth space. The prime objective of TARANIS is to detect energetic charged particles and hard radiation emanating from thunderclouds. The British Nobel prize winner C.T.R. Wilson predicted lightning discharges from the top of thunderclouds into space almost a century ago. However, new experiments have only recently confirmed energetic discharge processes which transfer energy from the top of thunderclouds into the upper atmosphere and near-Earth space; they are now denoted as transient luminous events, terrestrial gamma-ray flashes and relativistic electron beams. This meeting report builds on the current state of scientific knowledge on the physics of plasmas in the laboratory and naturally occurring plasmas in the Earth’s atmosphere to propose areas of future research. The report specifically reflects presentations delivered by the members of a novel Franco-British collaboration during a meeting at the French Embassy in London held in November 2011. The scientific subjects of the report tackle ionization processes leading to electrical discharge processes, observations of transient luminous events, electromagnetic emissions, energetic charged particles and their impact on the Earth’s atmosphere. The importance of future research in this area for science and society, and towards spacecraft protection, is emphasized.