Experimental and numerical study of soil-reinforcement effects on the low-strain stiffness and bearing capacity of shallow foundations

This paper presents results of meticulous laboratory testing and numerical simulations on the effect of reinforcement on the low-strain stiffness and bearing capacity of shallow foundations on dry sand. The effect of the location and the number of reinforcement layers is studied in the laboratory, whereas numerical simulations are used to study the reinforcement-foundation interaction. Laboratory tests show an increase of 100, 200, and 275% not only in bearing capacity but also in low-strain stiffness (linear load–displacement behaviour) of a square foundation when one, two, and three layers of reinforcement are used, respectively. The specimen preparation technique is found to be crucial for the repeatability and reliability of the laboratory results (less than 5% variability). Numerical simulations demonstrate that if reinforcements are placed up to a depth of one footing width (B) below the foundation, better re-distribution of the load to deeper layers is achieved, thus reducing the stresses and strains underneath the foundation. Numerical simulations and experimental results clearly identify a critical zone between 0.3 and 0.5B, where maximum benefits not only on the bearing capacity but also on the low-strain stiffness of the foundation are obtained. Therefore, soil reinforcement can also be used to reduce low-strain vibrations of foundations.     

Controls on modern alluvial fan processes in the central Alps,northern Italy

Alluvial fan development in Alpine areas is often affected by catastrophic sedimentary processes associated with extreme ?oods events, causing serious risks for people living on the fans. Hazard assessment in these areas depends on proper identi?cation of the dominant sedimentary processes on the fans. Data from a set of 209 alluvial fans from the central Alps of Italy are presented in this paper and analysed with the help of various statistical techniques (linear regression, principal components analysis, cluster analysis, discriminant analysis and logistic regression). First, we used modern sedimentary facies and historical records (?ood events since 15th century), to distinguish between the two dominant sedimentary processes on alluvial fans: debris ?ows and stream?ows. Then, in order to analyse the main controls on past and present fan processes, 36 morphological, geological and land‐use variables were analysed. As with observations for arid‐environment fans, catchment morphology is the most in?uential factor in the study area, whereas geology and land use are minor controls. The role of climatic change and landsliding within the catchments also seems to be very important and is discussed. Statistical techniques also help in differentiating groups of alluvial fans by sets of controlling factors, including stage and type of evolution. Finally, by using discriminant analysis and logistic regression, we classi?ed alluvial fans according to the dominant sedimentary process, with a success rate ranging between 75 and 92 per cent. Copyright © 2004 John Wiley & Sons, Ltd.     

Long-term evolution of the aerosol debris cloud produced by the 2009 impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009 (Sánchez-Lavega, A. et al. [2010]. Astrophys. J. 715, L155-L159). The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 μm. The impact cloud expanded zonally from ∼5000 km (July 19) to 225,000 km (29 October, about 180° in longitude), remaining meridionally localized within a latitude band from 53.5°S to 61.5°S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact’s energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5°S latitude increases its eastward velocity with altitude above the tropopause by 5-10 m s⁻¹. The corresponding vertical wind shear is low, about 1 m s⁻¹ per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m s⁻¹. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.     

Statistical Survey of Type III Radio Bursts at Long Wavelengths Observed by the Solar TErrestrial RElations Observatory (STEREO)/Waves Instruments: Goniopolarimetric Properties and Radio Source Locations

We have performed a statistical analysis of a large number of Type III radio bursts observed by STEREO between May 2007 and February 2013. Only intense, simple, and isolated cases have been included in our data set. We focused on the goniopolarimetric (GP, also referred to as direction-finding) properties at frequencies between 125 kHz and 2 MHz. The apparent source size γ is very extended (≈?60^°) for the lowest analyzed frequencies. Observed apparent source sizes γ expand linearly with a radial distance from the Sun at frequencies below 1 MHz. We show that Type III radio bursts statistically propagate in the ecliptic plane. The calculated positions of radio sources indicate that scattering of the primary beam pattern plays an important role in the propagation of Type III radio bursts in the interplanetary medium.     

Scaling wave impact pressures on vertical walls

It is widely recognized that the use of Froude similarity for scaling up wave impact pressures recorded during physical model tests may lead to over-estimation of impact maxima. Based on reviewing historical work dating back to the 30s and further developments in the 60s and 80s, a general method is presented that is suitable for scaling up impact pressures and rise times measured during small scale physical model tests. The method accounts for the effect of air leakage and is applicable to most wave impact loads. The model is applied to scale wave impact pressures on vertical walls and similar structures, and consistent correction factors for the Froude scaling law are derived.     

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.     

POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

The impact of dredge-fill on Posidonia oceanica seagrass meadows: regression and patterns of recovery

Posidonia oceanica meadows can be severely damaged by dredge-fill operations. We report on the construction of gas pipelines that occurred between 1981 and 1993 in SW Sicily, Italy. A large portion of the meadow was mechanically removed, and the excavated trench was filled with a mosaic of substrates, ranging from sand to consolidated rock debris. Meadow loss and recovery were quantified over 7 years after the end of operations. We recorded an overall loss of 81.20 ha of meadow. Substrate strongly affected recovery as the percent cover by P. oceanica consistently increased on calcareous rubble, reaching values of 44.37 ± 3.05% in shallow sites after 7 years, whereas no significant increase occurred on other substrates. As in the Mediterranean Sea exploitation of coastal areas continues to grow with consequent impacts on P. oceanica meadows, this case study illustrates how artificial rubble-like materials could be employed to support the restoration of damaged meadows.     

A peak acceleration threshold for soil liquefaction: lessons learned from the 2012 Emilia earthquake (Italy)

National and international seismic codes and recommendations provide criteria for liquefaction exclusion based on a peak ground acceleration (PGA) threshold value. In this paper, after a brief review of the procedures and the values suggested in those documents, a database of liquefaction case histories was created, exploiting the background data used in the most relevant verification charts, currently employed in research and professional practice. This dataset was used to identify, on the basis of simple statistical analyses, a PGA threshold on the free ground surface below which liquefaction is unlikely to occur, regardless of the geological site conditions. The calculated value, which is on the order of 0.07–0.1 g, based on the model employed to fit the data, was analyzed in light of information collected during the 2012 Emilia seismic sequence in Italy, which produced many liquefaction events triggered by low acceleration values. The case history of the Emilia earthquake advises setting a PGA threshold for code and recommendations at the lower probability level of occurrence, in the order of 1 %.     

Resilience and brittleness in the ALERTA RIO system: a field study about the decision-making of forecasters

Natural disasters, particularly those triggered by heavy rainfall, may cause major damage and death. However, if an accurate early warning is issued, the damage can be mitigated. In Latin America and Brazil, characteristics of socioeconomic development often lead to a disorderly growth of cities and, consequently, occupation and irregular construction in risk areas. Therefore, forecasts of heavy rainfall, as well as preventative and mitigatory actions based on meteorological data/alerts, are essential to saving lives and minimizing material loss. An event that would have benefited from such actions is that which occurred in the mountainous region of Rio de Janeiro in January 2011, when over 800 people lost their lives. This work describes the first research initiative on resilience engineering domain in systems to forecast heavy rains in Rio de Janeiro. The results indicate important sources of brittleness in the system that supports the work of meteorologists, mainly related to the technical and organizational framework, and suggests that the main source of resilience in dealing with critical situations is the tacit knowledge of experts.