Collocation resolution of the oceanic geoid based on satellite altimetry

The approach presented is directed toward a specific adaptation of the least‐squares collocation with noise, yielding smooth predictions of geophysical quantities. The smoothing corresponds here to a truncated gravity field equivalent to an (n’, n') spherical‐harmonic expansion. This is reflected in the truncation, at the degree n‘, of the pertinent covariance and cross‐covariance functions in most (but not all) instances. The smooth predictions of geophysical quantities, made in an equilateral grid corresponding to the truncation degree n‘, serve in constructing contour maps after having been densified for the needs of a contour routine. Such a densification is carried out efficiently via errorless collocation with the degree truncation n‘ throughout. Consistent with this procedure, “residuals” at observation points (i.e., discrepancies between the contour map and the data) are computed using the same algorithm. The complete collocation approach is utilized for a 2° resolution of the earth's gravity field with emphasis on the oceanic geoid, based on the residuals from a global spherical‐harmonic adjustment of SEASAT altimetry. The presented results include contour maps of geoid undulations and gravity anomalies. They are compared to the results of a point‐mass adjustment, another technique based on the spherical‐harmonic adjustment. The agreement between these two techniques is found to be excellent.     

Guest editorial

The Jason-1 satellite was launched on 7 December 2001 with the primary objective of continuing the high accuracy time series of altimeter measurements that began with the TOPEX/Poseidon mission in 1992. To achieve this goal, it is necessary to validate the performance of the Jason-1 measurement system, and to verify that its error budget is at least at the same level as that of the TOPEX/Poseidon mission. The article reviews the main components of the Jason-1 altimetric error budget from instrument characterization to the geophysical use of the data. Using the Interim Geophysical Data Records (16DR) that were distributed to the Jason-1 Science Working Team during the verification phase of the mission, it is shown that the Jason-1 mission is performing well enough to continue studies of the large-scale features of the ocean, and especially to continue time series of mean sea-level variations with an accuracy comparable to TOPEX/Poseidon.     

Deep-sea Fe-Mn Crusts from the Northeast Atlantic Ocean: Composition and Resource Considerations

Eighteen deep-sea ferromanganese crusts (Fe-Mn crusts) from 10 seamounts in the northeast Atlantic were studied. Samples were recovered from water depths of ～1,200 to ～4,600 m from seamounts near Madeira, the Canary and Azores islands, and one sample from the western Mediterranean Sea.

The mineralogical and chemical compositions of the samples indicate that the crusts are typical continental margin, hydrogenetic Fe-Mn crusts. The Fe-Mn crusts exhibit a Co + Cu + Ni maximum of 0.96 wt%. Platinum-group element contents analyzed for five samples showed Pt contents from 153 to 512 ppb.

The resource potential of Fe-Mn crusts within and adjacent to the Portuguese Exclusive Economic Zone (EEZ) is evaluated to be comparable to that of crusts in the central Pacific, indicating that these Atlantic deposits may be an important future resource.     

Initial results and progress of the Mississippi delta sediment pore water pressure experiment

Abstract

This report describes the instrumentation, initial results, and progress of an experiment designed to measure and monitor submarine sediment pore water and hydrostatic pressures in a selected area of the Mississippi Delta. The experiment also is intended to monitor significant pressure perturbations during active storm periods. Initial analysis of the data revealed excess pore water pressures in the silty clay sediment at selected depths below the mudline. Continuous monitoring of the pore water and hydrostatic pressures was expected to reveal important information regarding sediment pore water pressure variations as a function of the geological processes active in the Mississippi Delta.     

Assessment of relative slope stability of Kodiak shelf,Alaska, using high‐resolution acoustic profiling data

Abstract

The use of marine high‐resolution geophysical profiling data, seafloor soil samples, and accepted land‐based methods of analysis have provided a means of assessing the regional geotechnical conditions and relative slope stability of the portion of the Gulf of Alaska Continental Margin known as the Kodiak Shelf. Eight distinct types of soils were recognized in the study; the seafloor distribution of these indicates a complex geotechnical setting. Each soil unit was interpreted as having a distinct suite of geotechnical properties and potential foundation engineering problems. Seven categories of relative slope stability were defined and mapped. These categories range from “highest stability”; to “lowest stability,”; and are based on the degree of slope of the seafloor, type of soil underlying the slope, and evidence of mass movement. The results of the analysis indicate that the highest potential for soil failure exists on (1) the slopes forming boundaries between the submarine banks and the broad sea valleys, and (2) the upper portion of the continental slope, where evidence of past slope failure is common. Also of concern are gently sloping areas near the edges of submarine banks where evidence of possible tension cracks and slow downhill creep was found.     

Relationship between turbidity and fish diets in Lakes Waahi and Whangape,New Zealand

Abstract

Stomach contents of Gobiomorphus cotidianus,Retropinna retropinna, Gambusia affinis, and Anguilla australis were compared between two shallow lakes in the lower Waikato River basin, to examine the relationship between turbidity and diet. Lake Waahi and the south arm of Lake Whangape had been turbid (20–40 g suspended solids (SS) m^?3) and devoid of submerged macrophytes since the late 1970s and early 1980s, respectively. The main basin of Lake Whangape had been generally clearer (5 g SS m^?3) with dense beds of submerged macrophytes, but at the time of sampling (1987) water clarity had deteriorated (> c. 10 g SS m³) and submerged macrophytes had declined. The mysid Tenagomysis chiltoni was an important prey for all species of fish from turbid water bodies but was less important in stomachs of fish in the main basin of Lake Whangape. Apparently, mysids were not an important prey in Lake Waahi before it became turbid. Chironomid larvae and pupae dominated the diets of small fish in the main basin of Lake Whangape. Fish and mysids were the most important prey of shortfinned eels in both lakes, with mysids most important in Lake Waahi. High mysid densities in the turbid water bodies provide an alternative food resource apparently compensating for those lost by fish when water clarity declined and submerged macrophytes collapsed.     

A hybrid framework for improving recharge and discharge estimation for a three-dimensional groundwater flow model

We employed the ArcGIS plug-in package PRO-GRADE (Lin et al. 2009), developed for zonation of recharge/discharge (R/D) for modeling two-dimensional aquifer systems, to develop alternative R/D zonations for an existing three-dimensional groundwater flow model of a complex hydrogeologic setting. Our process began by intersecting PRO-GRADE output with the existing model's 4-zone R/D representation to develop a model having 12 R/D zones (R12) and then calibrating the resulting model using PEST. We then revised the R12 zonation using supplementary GIS data to develop a 51-zone R/D zonation (R51). From R51, we developed a series of daughter models having 40, 30, 28, and 18 R/D zones by removing zones from R51 if calibration resulted in little change in the zone's starting R/D rate and/or if the model was insensitive to the zone's R/D rate. For these models (R40N, R30N, R28N, and R18N), we used the ArcGIS Nibble tool to rapidly and consistently reassign model cells within eliminated zones of R51 to the zone of the nearest model cell in a retained zone having the same starting value. R12, R51, R40N, R30N, R28N, and R18N are all more accurate than the original model (R4), although improvements relative to stream discharge targets exceeded improvements relative to head targets. The models also executed with better numerical stability and less mass balance discrepancy than R4. These improvements demonstrate that R/D estimation in a complex shallow three-dimensional steady-state model can be improved with PRO-GRADE estimates of R/D when guided by calibration statistics and supplemental geographic data.     

Irrigation effects in the northern lake states: Wisconsin central sands revisited

Irrigated agriculture has expanded greatly in the water-rich U.S. northern lake states during the past half century. Source water there is usually obtained from glacial aquifers strongly connected to surface waters, so irrigation has a potential to locally decrease base flows in streams and water levels in aquifers, lakes, and wetlands. During the nascent phase of the irrigation expansion, water availability was explored in works of some fame in the Wisconsin central sands by Weeks et al. (1965) on the Little Plover River and Weeks and Stangland (1971) on "headwater area" streams and lakes. Four decades later, and after irrigation has grown to a dominant landscape presence, we revisited irrigation effects on central sands hydrology. Irrigation effects have been substantial, on average decreasing base flows by a third or more in many stream headwaters and diminishing water levels by more than a meter in places. This explains why some surface waters have become flow and stage impaired, sometimes to the point of drying, with attendant losses of aquatic ecosystems. Irrigation exerts its effects by increasing evapotranspiration by an estimated 45 to 142 mm/year compared with pre-irrigated land cover. We conclude that irrigation water availability in the northern lake states and other regions with strong groundwater-surface water connections is tied to concerns for surface water health, requiring a focus on managing the upper few meters of aquifers on which surface waters depend rather than the depletability of an aquifer.     

Rock warming and drying under simulated intertidal conditions,part II: weathering and biological influences on evaporative cooling and near‐surface micro‐climatic conditions as an example of biogeomorphic ecosystem engineering

The way in which rocks and engineering materials heat‐up and dry‐out in the intertidal zone is of relevance to both weathering and ecology. These behaviours can be measured in the laboratory under controlled conditions designed to replicate those occurring in the field. Previous studies have demonstrated differences in thermal behaviours between rock types and through time as a result of soiling in terrestrial environments, but the influence of weathering and colonization on rock behaviours in the intertidal zone has not been previously assessed. We measured the warming and drying of blocks of rock (limestone and granite) and marine concrete during ‘low‐tide’ events simulated in the laboratory, before and after a period of exposure (eight months) on rock platforms in Cornwall, UK. As well as differences between the material types, temperatures of control (unexposed) and field‐exposed blocks differed in the order of 1 to 2 °C. Drying behaviours were also different after field exposure. Differences during the first few hours of exposure to air and heat were attributed to discolouration and albedo effects. Over longer periods of time, changes in the availability of near‐surface pore water as a result of micro‐scale bioerosion of limestone and the development of bio‐chemical crusts on marine concrete [observed using scanning electron microscopy (SEM)] are suggested as mechanisms enhancing and reducing, respectively, the efficiency of evaporative cooling. The retention of moisture by epilithic biofilms may also influence thermal and drying behaviours of granite. These observations represent one of the first examples of cross‐scalar biogeomorphic linkages in the intertidal zone. The significance of the results for the subsequent efficiency of weathering, and near‐surface micro‐climatic conditions experienced by colonizing organisms is discussed. The involvement of microorganisms in the creation of more (or less) ecologically stressful conditions through the alteration of substratum geomorphic properties and behaviours is suggested as an example of ‘biogeomorphic ecosystem engineering’. Copyright © 2011 John Wiley & Sons, Ltd.     

Eddy covariance imaging of diffuse volcanic CO<Subscript>2</Subscript> emissions at Mammoth Mountain,CA, USA

Use of eddy covariance (EC) techniques to map the spatial distribution of diffuse volcanic CO₂ fluxes and quantify CO₂ emission rate was tested at the Horseshoe Lake tree-kill area on Mammoth Mountain, California, USA. EC measurements of CO₂ flux were made during September–October 2010 and ranged from 85 to 1,766 g m⁻² day⁻¹. Comparative maps of soil CO₂ flux were simulated and CO₂ emission rates estimated from three accumulation chamber (AC) CO₂ flux surveys. Least-squares inversion of measured eddy covariance CO₂ fluxes and corresponding modeled source weight functions recovered 58–77% of the CO₂ emission rates estimated based on simulated AC soil CO₂ fluxes. Spatial distributions of modeled surface CO₂ fluxes based on EC and AC observations showed moderate to good correspondence (R ² = 0.36 to 0.70). Results provide a framework for automated monitoring of volcanic CO₂ emissions over relatively large areas.