Footings under seismic loading: Analysis and design issues with emphasis on bridge foundations

The paper provides state-of-the-art information on the following aspects of seismic analysis and design of spread footings supporting bridge piers: (1) obtaining the dynamic stiffness (“springs” and “dashpots”) of the foundation; (2) computing the kinematic response; (3) determining the conditions under which foundation–soil compliance must be incorporated in dynamic structural analysis; (4) assessing the importance of properly modeling the effect of embedment; (5) elucidating the conditions under which the effect of radiation damping is significant; (6) comparing the relative importance between kinematic and inertial response. The paper compiles an extensive set of graphs and tables for stiffness and damping in all modes of vibration (swaying, rocking, torsion), for a variety of soil conditions and foundation geometries. Simplified expressions for computing kinematic response (both in translation and rotation) are provided. Special issues such as presence of rock at shallow depths, the contribution of foundation sidewalls, soil inhomogeneity and inelasticity, are also discussed. The paper concludes with parametric studies on the seismic response of bridge bents on embedded footings in layered soil. Results are presented (in frequency and time domains) for accelerations and displacements of bridge and footing, while potential errors from some frequently employed simplifications are illustrated.     

Bildung bromhaltiger Desinfektionsnebenprodukte nach Chlorung von Bodenseewasser in Abhängigkeit von Aufbereitungsschritten und der Bromidkonzentration

Formation of Brominated Disinfection By-products after Chlorination of Water from Lake Constance Depending on Treatment Steps and Bromide Concentration The formation of halogenated disinfection by-products (DNP) (trihalomethanes (THM), haloacetic acids (HES), haloacetonitriles (HAN), haloketones (HKE) and chloropicrin (TCNM)) was studied after chlorination (0.5 mg/L) of raw water and drinking water from Lake Constance. The objectives of this study were to investigate the effect of bromide ion on the distribution of DNP-species resulting from chlorination and to draw up a bromide mass-balance. The treatment of water from Lake Constance with ozone decreased the formation of DNP about 35% and of total organic halogens (AOX) about 45%. This decline in DNP-formation is mainly due to the formation of chloroform, dichloro- and trichloroacetic acid. Though there is only a small amount of bromide (6.2 μg/L) in water from Lake Constance, about 32% of THM, 16% of HES, and 30% of HAN contained bromine after chlorination of treated water. The addition of bromide ion (up to 1 mg/L) shifted the DNP-composition to more brominated species. The distribution of the DNP-species depends on the initial molar bromide-to-chlorine ratio. A mathematic model showed the same pattern of DNP-species depending on the initial molar bromide-to-chlorine ratio that was observed experimentally in microstrained raw water and drinking water from Lake Constance. After chlorination of microstrained raw water, 27% of the bromide were incorporated in known DNP, 34% in unknown substances, and about 39% of bromide were not converted to organic bromine. After chlorination of treated water, only 16% of the bromide were incorporated in unknown substances, whereas 34% were found in known DNP. About 50% were found as bromide again. After addition of bromide (up to 25 μg/L) to ozonated and treated water from Lake Constance, between 60 and 72% of the bromide that had reacted after chlorination were found in analyzed low-molecular DNP.     

Biogenic origin of coastal honeycomb weathering

Honeycomb weathering occurs in two environments in Late Cretaceous and Eocene sandstone outcrops along the coastlines of south‐west Oregon and north‐west Washington, USA, and south‐west British Columbia, Canada. At these sites honeycomb weathering is found on subhorizontal rock surfaces in the intertidal zone, and on steep faces in the salt spray zone above the mean high tide level. In both environments, cavity development is initiated by salt weathering. In the intertidal zone, cavity shapes and sizes are primarily controlled by wetting/drying cycles, and the rate of development greatly diminishes when cavities reach a critical size where the amount of seawater left by receding tides is so great that evaporation no longer produces saturated solutions. Encrustations of algae or barnacles may also inhibit cavity enlargement. In the supratidal spray zone, honeycomb weathering results from a dynamic balance between the corrosive action of salt and the protective effects of endolithic microbes. Subtle environmental shifts may cause honeycomb cavity patterns to continue to develop, to become stable, or to coalesce to produce a barren surface. Cavity patterns produced by complex interactions between inorganic processes and biologic activity provide a geological model of ‘self‐organization’. Surface hardening is not a factor in honeycomb formation at these study sites. Salt weathering in coastal environments is an intermittently active process that requires particular wind and tidal conditions to provide a supply of salt water, and temperature and humidity conditions that cause evaporation. Under these conditions, salt residues may be detectable in honeycomb‐weathered rock, but absent at other times. Honeycomb weathering can form in only a few decades, but erosion rates are retarded in areas of the rock that contain cavity patterns relative to adjacent non‐honeycombed surfaces. Copyright © 2010 John Wiley & Sons, Ltd.     

SporadicE ionization associated with meteor events

Two meteor events which were sighted in the Gujarat skies of India, were accompained by the visibility of sporadicE ionization on the ionograms recorded at Ahmedabad (Geog. Lat. 23·2°N, long. 72·30°E). The first event was the Dhajala fireball which flashed into the geoatmosphere along an E-N to W-S trail at about 20·40 h IST on 28 January 1976; the closest distance of the ground projection of meteor trail from Ahmedabad was 50km. The other event was a possible meteor group sighted over Ahmedabad on 28 May 1978, at about 21·10 h IST. This work describes the nature of the sporadicE ionization observed on Ahmedabad ionograms during the two events. Features of theEs echo during the Dhajala event which indicate that it could be of meteoric origin are discussed. Meteor theory is used to relate the observed ionization with the physical dimensions of the Dhajala meteorite as obtained by other workers.     

To what extent can atmospheric deposition influence the natural background of metals in ground waters? A case study in the Czech Republic

In harmony with requirements of Water Framework Directive the natural backgrounds of selected metals were established on the territory of Czech Republic. This paper is intended to provide characteristics and results of testing methods focused on quantification of the impacts of anthropogenic activities based on data of regional monitoring and their separation from acid atmospheric deposition including an appropriate discussion regarding the natural backgrounds of relevant metals. The results indicate that even in regions extremely affected by acid atmospheric deposition as is the territory of the Czech Republic this acid deposition will not have direct impact on the quality of ground waters on a regional scale. Consequently, the proved changes in quality of ground waters seem to have been caused by secondary processes, specifically by mobilization of metals in a rock environment due to increased acidity.     

Discontinuity controlled probabilistic slope failure risk maps of the Altindag (settlement) region in Turkey

The evaluation of potential rock slope problems using stereographic projection techniques known as kinematic analysis is one of the most important parts of a slope stability investigation to be carried out in jointed rock media. In conventional stereoprojection techniques for the assessment of possible rock slope failures, the peak orientations of joints together with the slope geometry and the friction angle of the weakness planes are used. Other possible joint orientations which may be encountered in the rock media are ignored, although they belong to the group of joint peak orientations. In this study, nearly vertical jointed andesites cropped out at the Altindag settlement region in Ankara were studied in order to evaluate the relevance of this ignored discontinuity orientation data on slope stability. As a result, probabilistic risk maps for planar, toppling and wedge failures were produced using the kinematic rules and digital elevation model of the study area. The comparison of the distribution of the actual failures in the area and the probabilistic risk maps prepared for the study area revealed that all of the identified failures are found to be located in the higher risk zones on the probabilistic risk maps.     

Power spectrum of geomagneticK p-index detected at Misallat magnetic station

TheK _p-indices measured at Misallat station [ø = 29°45 N; = 30°54 E] during the period 1958–1989, have been compared with the data of two geomagnetic stations; one of them has similar longitude as Misallat and the second has almost similar latitude. The spectra of daily and hourly data of the three stations are compared together to define the latitude and longitude-effects on the detected periodicities. Daily periodicities ofK _p-index activities at the values 32.7, 21.2, 12.9, 11.6 and 9.2 days have been obtained to be common in the spectra of the three stations. The existence of 5-days periodicity in these stations has also been detected.     

Evidence for focused hot fluid flow within the Britannia Field, offshore Scotland, UK

Fluid inclusion and scanning electron microscope‐cathodoluminescence evidence indicates focused hot, saline, diagenetic fluid flow within the Eastern Flank of the Britannia Field, offshore Scotland, UK. The fluid was sourced from the Andrew Salt Dome, 10 km to the east. The fluids, which promoted quartz cementation of the upper zones within the field, were up to ～30°C hotter and had salinities up to ～10 wt% NaCl equivalent higher than fluids from lower in the reservoir section. During diagenesis hot saline fluids migrated westwards as part of a radiating ‘diagenetic front’ from the Andrew Salt Dome. Structural dip associated with the Eastern Flank of the Fladen Ground Spur impeded the westward movement of the diagenetic fluid. The quartz cements from the upper and lower reservoir zones can be distinguished by morphology. In the upper zones the quartz cements have well‐developed macro‐crystalline zoning and heterogeneous luminescence across the grain. In the lower zones, the cements are much less developed, unzoned and very weakly luminescent. The diagenetic fluids were primarily focused into Zone 45 within the upper reservoir. Furthermore, within the Main Platform Area the most prolific producing zone is Zone 45, indicating the importance of this interval as a permeable flow unit during both diagenetic and production timescales. Within the Eastern Flank, the quartz overgrowths have a major impact on reservoir permeability and thus well productivity. The overgrowths are most extensive in the originally clean sandstones with low clay content. Clay in optimum volumes (5–10%) can inhibit nucleation of the damaging quartz overgrowths without having a detrimental effect on pore connectivity. These observations provide a predictive concept for use in the search for relative reservoir sweetspots within the degraded Eastern Flank.