Comparison of cytochrome P450 in three butterflyfish species: Ecological implications of elevated CYP2B and CYP3A in Chaetodon capistratus

The relationship between cytochrome P450 and feeding on terpenoid-rich gorgonian corals was investigated in a species of tropical butterflyfish and compared with two other sympatric congeners that do not feed on gorgonians. Fish were collected from non-polluted waters in Belize and the levels of two cytochrome P450 isozymes (CYP2B and CYP3A) were immunoquantitated in addition to quantification of total P450. Chaetodon capistratus regularly feeds on gorgonian corals and has higher levels of total hepatic microsomal cytochrome P450 than C. ocellatus or C. striatus. The content of hepatic P450 (0.588–0.794 nmol mg⁻¹) in C. capistratus is among the highest ever reported in teleosts from non-polluted waters and is significantly greater than detected in C. ocellatus or C. striatus. Chaetodon capistratus also had a larger hepatic index (g liver per g fish) and more microsomal protein (mg protein per g liver), factors that translate into 3.3- to 8-fold more total P450 per g fish. Sexual differences in total P450 were observed between male and female C. capistratus, but not among the other species. The contents of proteins detected by immunoassay with polyclonal anti-scup P450B (CYP2B) and anti-human P4503A (CYP3A) were 2- to 10-fold and 2- to 20-fold greater, respectively, in C. capistratus than in the congeneric species. CYP2 and CYP3 gene families in mammals are thought to have evolved partially in response to dietary allelochemicals. These results suggest that these P450 isozymes may also be important in marine teleosts that feed on terpenoid-rich prey.     

Geochemistry and palaeo-oceanography of metalliferous and pelagic sediments from the Late Cretaceous Oman ophiolite

Metalliferous and pelagic sediments are exposed within and above the extrusive successions of the Upper Cretaceous Oman ophiolite which, on the basis of mostly geochemical evidence, is believed to have formed in an incipient marginal basin setting located above a NE-dipping subduction zone. The ophiolitic extrusives document various volcano-tectonic settings which include the axial zones of a spreading ridge, fault-controlled seamounts and off-axis volcanic edifices. Most of the Fe, Mn and trace metal-enriched sediments studied are interpreted as precipitates formed by oxidation of solutions derived from high-temperature sulphide-precipitating vents. The trace element content (e.g. REE and Sr) was largely scavenged from seawater. The sediments are similar to the dispersed metalliferous sediments on the flanks of modern spreading ridges, and the ‘basal’ sediments of DSDP wells and of other ophiolite complexes (e.g. Troodos, Cyprus).Distinctive mound structures located low in the lavas are attributed to percolation of sulphide-rich solutions into already deposited metalliferous oxide sediments. The resulting iron-silica rock was probably originally precipitated as ferruginous silicates.Major massive sulphides formed off-axis at the base of intermediate-basic edifices of volcanic arc affinities. Fe, Mn and trace metal enrichment in the sediment cover of a flat-topped seamount of axial lavas is interpreted as a dispersion halo around the largest massive sulphide orebody which is situated 5 km away (Lasail). Small massive sulphide bodies are common in the axial lavas particularly along major seafloor fault zones. The metalliferous sediments, locally precipitated near these vents, are ferromanganiferous, but trace metal-depleted.The metalliferous and pelagic sediment cover of the extrusive successions, generally, documents waning hydrothermal input after volcanism ended in the area.A model is discussed in which the ophiolite was created at a spreading axis above a subduction zone dipping away from the Arabian continental margin. With progressive subduction this crust approached the margin. Initially, calcareous sediment accumulated above the calcite compensation depth (CCD), but then non-calcareous radiolarites were deposited as the ophiolitic crust approached the continental margin where the CCD was higher and marginal upwelling possibly enhanced productivity. As the edge of the Arabian continental margin entered the trench, the over-riding ophiolite was regionally uplifted allowing short-lived chalk accumulation above the CCD. This was followed by volcaniclastic deposition related to the tectonic emplacement.     

A new efficient 3D non-hydrostatic free-surface flow model for simulating water wave motions

A new three-dimensional, non-hydrostatic free surface flow model is presented. For simulating water wave motions over uneven bottoms, the model employs an explicit project method on a Cartesian the staggered gird system to solve the complete three-dimensional Navier–Stokes equations. A bi-conjugated gradient method with a pre-conditioning procedure is used to solve the resulting matrix system. The model is capable of resolving non-hydrostatic pressure by incorporating the integral method of the top-layer pressure treatment, and predicting wave propagation and interaction over irregular bottom by including a partial bottom-cell treatment. Four examples of surface wave propagation are used to demonstrate the capability of the model. Using a small of vertical layers (e.g. 2–3 layers), it is shown that the model could effectively and accurately resolve wave shoaling, non-linearity, dispersion, fission, refraction, and diffraction phenomena.     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

Quaternary evolution of the Gulf of İzmit (NW Turkey): a sedimentary basin under control of the North Anatolian Fault Zone

The Quaternary evolution of the Gulf of İzmit, situated on the tectonically active North Anatolian Fault Zone (NAFZ), was investigated using seismic reflection, paleontologic, and sediment textural data. On the basis of seismic stratigraphic and sedimentologic-paleontologic interpretations, four depositional units were distinguished within the Plio-Quaternary sequence of the Gulf of İzmit. According to these data, Plio-Quaternary deposits supplied from the northern terrestrial area started to accumulate during a progradational phase, in a south-facing half-graben. A coarse-grained sedimentary unit prograding into the gulf from the south since 200 ka b.p. indicates a dramatic variation in the evolution of the gulf, with the initiation of a new strike-slip fault of the NAFZ and a corresponding uplift of the Armutlu Peninsula in the south of the gulf. During the evolution of this fault from a wide shear zone consisting of right-stepped strike-slip faults and pull-apart basins to a localized principal fault zone, sediments were deposited under the influence of northerly prograding terrestrial and shallow-marine conditions due to relative sea-level fluctuations in the Marmara Sea. During this period, the Gulf of İzmit was invaded mainly by Mediterranean and partly by Black Sea waters. In the latest glacial period, shallow areas in the gulf became subaerially exposed, whereas the central and western sub-basins of the gulf turned into lakes. The present evolution of the Gulf of İzmit is controlled by the after effects of the new rupture of the NAFZ and the estuarine nature of the gulf environment.     

Evaluation of long-term extreme response statistics of jack-up platforms

This paper is concerned with the models appropriate for the dynamic assessment of jack-ups, concentrating particularly on the long-term response due to random ocean waves and on work-hardening plasticity models used for spud-can response. A methodology for scaling of short-term statistics, calculated using a Constrained NewWave technique, is shown in a numerical experiment for an example jack-up and central North Sea location. The difference in long-term extreme response statistics due to various footing assumptions is emphasised. Results for two environmental load conditions are described (one excluding and one including wind and current effects) and the role of sea-state severity in the variation of short-term extreme response statistics is also highlighted.     

Cross-Calibration and Long-Term Monitoring of the Microwave Radiometers of ERS, TOPEX, GFO, Jason, and Envisat

The radiometers on board the satellites ERS-1, TOPEX/Poseidon, ERS-2, GFO, Jason-1, and Envisat measure brightness temperatures at two or three different frequencies to determine the total columnal water vapor content and wet tropospheric path delay, a major correction to the altimeter range measurements. In order to asses the long-term stability of the path delay, the radiometers are calibrated against vicarious cold and hot references, against each other, and against several atmospheric models. Four of these radiometers exhibit significant drifts in at least one of the channels, resulting in yet unmodeled errors in path delay of up to 1 mm/year, thus limiting the accuracy at which global sea level rise can be inferred from the altimeter range measurements.     

The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound

Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress.     

High resolution gravimetric geoid heights and gravimetric vertical deflections of Europe including marine areas

Gravimetric geoid heights and gravimetric vertical deflections have been detemined for Europe including the Mediterranean Sea, North Sea, Norwegian Sea, Baltic Sea and parts of the North Atlantic Ocean in a 12′×20′ grid. The computation has been carried out by least squares spectral combination using closed integral formulas, combining 104 000 mean free air gravity anomalies in 6′×10′ blocks, 12 000 mean free air gravity anomalies in 1⁰×1⁰ blocks and the sherical harmonic model GEM9. The precision of the computed geoid heights has been estimated to ±1 m, the precision of the computed vertical deflections has been estimated to ±2″. Comparisons of the gravimetric geoid heights and vertical deflections with a number of other solutions have been carried out, confirming the precision estimation.     

Are Global Tide Gauge Data Stationary in Variance?

Tide gauges distributed all over the world provide valuable information for monitoring mean sea level changes. The statistical models used in estimating sea level change from the tide gauge data assume implicitly that the random model components are stationary in variance. We show that for a large number of global tide gauge data this is not the case for the seasonal part using a variate-differencing algorithm. This finding is important for assessing the reliability of the present estimates of mean sea level changes because nonstationarity of the data may have marked impact on the sea level rate estimates, especially, for the data from short records.