The OSIRIS‐REx target asteroid (101955) Bennu: Constraints on its physical,geological, and dynamical nature from astronomical observations

We review the results of an extensive campaign to determine the physical, geological, and dynamical properties of asteroid (101955) Bennu. This investigation provides information on the orbit, shape, mass, rotation state, radar response, photometric, spectroscopic, thermal, regolith, and environmental properties of Bennu. We combine these data with cosmochemical and dynamical models to develop a hypothetical timeline for Bennu's formation and evolution. We infer that Bennu is an ancient object that has witnessed over 4.5 Gyr of solar system history. Its chemistry and mineralogy were established within the first 10 Myr of the solar system. It likely originated as a discrete asteroid in the inner Main Belt approximately 0.7–2 Gyr ago as a fragment from the catastrophic disruption of a large (approximately 100‐km), carbonaceous asteroid. It was delivered to near‐Earth space via a combination of Yarkovsky‐induced drift and interaction with giant‐planet resonances. During its journey, YORP processes and planetary close encounters modified Bennu's spin state, potentially reshaping and resurfacing the asteroid. We also review work on Bennu's future dynamical evolution and constrain its ultimate fate. It is one of the most Potentially Hazardous Asteroids with an approximately 1‐in‐2700 chance of impacting the Earth in the late 22nd century. It will most likely end its dynamical life by falling into the Sun. The highest probability for a planetary impact is with Venus, followed by the Earth. There is a chance that Bennu will be ejected from the inner solar system after a close encounter with Jupiter. OSIRIS‐REx will return samples from the surface of this intriguing asteroid in September 2023.     

Carbon-Oxidizing and Sulfate-Reducing Bacteria in Mozhaisk Reservoir Soils

The population and distribution of carbon-oxidizing and sulfate-reducing bacteria in the soils of the Mozhaisk Reservoir are studied.     

Shock metamorphism of quartz in nature and experiment: II. Significance in geoscience*

Abstract— The occurrence of shock metamorphosed quartz is the most common petrographic criterion for the identification of terrestrial impact structures and lithologies. Its utility is due to its almost ubiquitous occurrence in terrestrial rocks, its overall stability and the fact that a variety of shock metamorphic effects, occurring over a range of shock pressures, have been well documented. These shock effects have been generally duplicated in shock recovery experiments and, thus, serve as shock pressure barometers. After reviewing the general character of shock effects in quartz, the differences between experimental and natural shock events and their potential effects on the shock metamorphism of quartz are explored. The short pulse lengths in experiments may account for the difficulty in synthesizing the high-pressure polymorphs, coesite and stishovite, compared to natural occurrences. In addition, post-shock thermal effects are possible in natural events, which can affect shock altered physical properties, such as refractive index, and cause annealing of shock damage and recrystallization. The orientations of planar microstructures, however, are unaffected by post-impact thermal events, except if quartz is recrystallized, and provide the best natural shock barometer in terms of utility and occurrence. The nature of planar microstructures, particularly planar deformation features (PDFs), is discussed in some detail and a scheme of variations in orientations with shock pressure is provided. The effect of post-impact events on PDFs is generally limited to annealing of the original glass lamellae to produce decorated PDFs, resulting from the exsolution of dissolved water during recrystallization. Basal (0001) PDFs differ from other PDF orientations in that they are multiple, mechanical Brazil twins, which are difficult to detect if not partially annealed and decorated. The occurrence and significance of shock metamorphosed quartz and its other phases (namely, coesite, stishovite, diaplectic glass and lechatelierite) are discussed for terrestrial impact structures in both crystalline (non-porous) and sedimentary (porous) targets. The bulk of past studies have dealt with crystalline targets, where variations in recorded shock pressure in quartz have been used to constrain aspects of the cratering process and to estimate crater dimensions at eroded structures. In sedimentary targets, the effect of pore space results in an inhomogeneous distribution in recorded shock pressure and temperature, which requires a different classification scheme for the variation of recorded shock compared to that in crystalline targets. This is discussed, along with examples of variations in the relative abundances of planar microstructures and their orientations, which are attributed to textural variations in sedimentary target rocks. Examples of the shock metamorphism of quartz in distal ejecta, such as at the K/T boundary, and from nuclear explosions are illustrated and are equivalent to that of known impact structures, except with respect to characteristics that are due to long-term, post-shock thermal effects. Finally, the differences between the deformation and phase transformation of quartz by shock and by endogenic, tectonic and volcanic processes are discussed. We confirm previous conclusions that they are completely dissimilar in character, due to the vastly different physical conditions and time scales typical for shock events, compared to tectonic and volcanic events. Well-characterized and documented shock effects in quartz are unequivocal indicators of impact in the natural environment.     

Pressure effects on martian crustal magnetization near large impact basins

Abstract— Martian crust endured several large meteoroid impacts subsequent to the demise of an early global magnetic field. Shock pressures associated with these impacts demagnetized parts of the crust, to an extent determined by shock resistance of magnetic materials in the crust. Impacts that form large basins generate pressures in excess of 1 GPa within a few crater radii of their impact sites. Crustal materials near the surface experience significantly reduced impact pressure, which varies with depth and distance from the impact point. We present new demagnetization experiments on magnetite (Fe₃O₄), hematite (α‐Fe₂O₃), and titanohematite (Fe_2‐xTi_xO₃ where x <0.2). Our measurements show that pressures of ?1 GPa are sufficient to partially demagnetize all of these minerals. The efficiency of demagnetization by impact pressure is proportional to the logarithm of the minerals' magnetic coercivity. The impact pressure magnetic response from exsolved titanohematite samples is consistent with the magnetization decay near Prometheus impact basin and may point to an oxidized igneous rock in Terra Sirenum region at the time of acquisition of magnetic remanence. The remaining magnetic anomalies near large impact basins suggest moderate crustal coercivity. These anomalies point to titanomagnetite as a magnetic carrier and more reduced condition during crustal formation.     

Origin of dacites of Taupo Volcanic Zone, New Zealand

Dacites form a relatively small proportion of lavas in the Taupo Volcanic Zone, New Zealand (5km³), and occur mainly on the eastern side. In this paper their origin is considered in terms of three processes: (a) partial melting of crustal rocks; (b) fractional crystallisation of basalt and andesite; and (c) sub-surface mixing of basic and acid magma. Modelling techniques are used to calculate the most acceptable degree of fractional crystallisation and magma mixing to fit major-element data, and these values are used to compare calculated and observed trace-element values. The success or failure of the model is determined by the closeness of the two sets of values. For partial-melt models, trace-element values alone are calculated by the batch-melting equation.Results indicate that White Island dacite can best be modelled by fractional crystallisation; Manawahe by fractional crystallisation plus limited crustal contamination; Maungaongaonga by partial melting of Western Basement greywacke, and Tauhara by partial melting of this greywacke together with minor mixing with a more basic magma. Results from Parekauau and Horohoro indicate that these lavas are unlikely to have formed by any of the processes examined.     

Source investigation of a small event using empirical Green's functions and simulated annealing

We propose a two-step inversion of three-component seismograms that (1) recovers the far-field source time function at each station and (2) estimates the distribution of co-seismic slip on the fault plane for small earthquakes (magnitude 3 to 4). The empirical Green's function (EGF) method consists of finding a small earthquake located near the one we wish to study and then performing a deconvolution to remove the path, site, and instrumental effects from the main-event signal.
The deconvolution between the two earthquakes is an unstable procedure: we have therefore developed a simulated annealing technique to recover a stable and positive source time function (STF) in the time domain at each station with an estimation of uncertainties. Given a good azimuthal coverage, we can obtain information on the directivity effect as well as on the rupture process. We propose an inversion method by simulated annealing using the STF to recover the distribution of slip on the fault plane with a constant rupture-velocity model. This method permits estimation of physical quantities on the fault plane, as well as possible identification of the real fault plane.
We apply this two-step procedure for an event of magnitude 3 recorded in the Gulf of Corinth in August 1991. A nearby event of magnitude 2 provides us with empirical Green's functions for each station. We estimate an active fault area of 0.02 to 0.15 km² and deduce a stress-drop value of 1 to 30 bar and an average slip of 0.1 to 1.6 cm. The selected fault of the main event is in good agreement with the existence of a detachment surface inferred from the tectonics of this half-graben.     

GPS-based modeling of the interaction between the lithospheric plates in Sakhalin

The recent geodynamics of Sakhalin are determined by the convergence between the Eurasian and North American lithospheric plates, which is reflected in the high seismicity of the island. The method of inversion of the horizontal velocities of the island surface with account for the geological features of the region is used to analyze the different models of the convergence between the plates. This made it possible to estimate the depth of the mechanical contact between the plates and the velocities of their convergence for the southern, central, and northern segments of the island.     

The identification of the 3μ spectral feature in galactic infrared sources

We show that a 3 extinction feature in galactic infrared sources cannot be due to water-ice grains. Infrared spectra with a resolution of /=0.015 are in remarkably close agreement with the 2.5–4 extinction properties calculated for bacterial grains.     

Petrology of the Izmir-Karaburun volcanic area (West Turkey)

The Izmir-Karaburun region is located on the West coast of Turkey. In this area volcanic rocks of the late Miocene-Pliocene age outcrop. On the basis of the collected petrographic and geochemical data it has been possible to subdivide these rocks in to three series:a) calc-alkaline series of Karaburun-Koca dag-Izmir (quantitatively the most important). This series is formed by latite-andesites-dacites-rhyodacites.b) Silicic series of Izmir-Lebedos, mainly constituted by alkali rhyolitic rocks.c) Urla series, formed by alkali trachytes and alkali rhyolites, associated with scarce basic lavas of hawaiitic type. A different genesis is assumed for these series. In a first phase the latite-andesitic magma was formed by a partial melting in the lower crust or in the upper mantle. Afterwards a subcrustal magma with alkali basaltic affinity rose slowly through the crust forming an intermediate reservoir and differentiating predominantly towards alkali trachytic terms. Finally silicic magma of Izmir-Lebedos was formed by an anatectic process. It is possible that the fusion has been favoured by the presence of basic magma in the upper crust.