Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

北黄海长山群岛海域沉积环境初步研究

本文在获取１９８９－１９９３年黄海北部长山群岛海域沉积物大量数据基础上，借助沉积物粒度分析（Ｑ型），揭示出该海域具有在“岛屿效应”影响下的４种环境能量类型，分析了与其适应的环岛沉积环境及其分布特征。     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.     

试述福建顺昌南舟萤石矿地质特征

顺昌南舟萤石矿位于顺昌县埔上镇南舟村境内，1996年福建省区域地质调查队开展1：5万埔上幅区调时发现矿体，后开展普查工作表明该矿床规模大、交通方便，易于开采，现已投入开发利用。南舟萤石矿成矿地质特征在闽北丰富的萤石资源中具有一定代表性。     

JX—3解析测图仪上航测高倍放大成图的试验

介绍试用１：３３０００比例尺航测资料，在ＪＸ－３解析测图仪上高倍放大航测１：１０００比例尺地形图的成图方案和应采取的技术措施，运用 解析法模型绝对定向的原理，在全野布点时采用两种方案对照比较，进行理论和试验精度的分析，并给出试验结果。     

变频激电法在四川某金矿中的应用

本文介绍了用变频激电法寻找含金硫化物矿体 ,通过对视幅频效应 Fs,和交流视电阻率 ρsf的分析 ,取得了良好的地质效果     

临沧超大型锗矿床有机质与锗矿化的地球化学特征

临沧锗矿床是一产于第三系含煤岩系中的超大型矿床。矿床的最初锗源与盆地西缘的二云母花岗岩有关。主矿体产于下煤组沉积旋回的早期地层中，每一沉积阶段早期形成的褐煤和碳质泥岩中富含锗，最高含量达１４７０×１０＾－６。褐煤和碳质泥岩在矿化过程中平均富集了１６４－１６９倍。根据锗含量，褐煤和碳质泥岩可分为锗含量小于１２×１０＾－６的低锗煤（泥岩）和大于９０×１０＾－６的高锗煤（泥岩）。高锗煤中有机质富含氧官能     

Relocation of the October 9, 1505 Earthquake with M63/4

There have been 12 possible locations of the earthquakes occurring in the South Yellow Sea since 1505.In this paper,the location of the earthquake that occurred in 1505 has been determined by the collection of more historical data of the influenced field,referring the isoseismal data of earthquakes with the epicentral intensityⅨ and combining geophysical field data with tectonic condition,due to its great influence on seismic safety assessment of some significant engineering.     

On the long-term seismic hazard analysis in the Zhangjiakou–Penglai seismotectonic zone, China

The Zhangjiakou–Penglai seismotectonic zone (ZPSZ) lies in the northern part of North China and extends along the Zhangjiakou–Beijing–Tianjin–Bohai Bay–Penglai–Yellow Sea. It is about 900 km long and some 250 km wide in a northwest direction. The great Sanhe-Pinggu (M_S=8.0) earthquake occurred on September 1679 and the Tangshan (M_S=7.8) earthquake on July 1976 caused serious economic and life losses. According to some differences in crust structure and regional tectonic stress field, the ZPSZ is divided into western and eastern segment by the 117°E line for study on long-term seismic hazard analysis. An analysis of Gutenberg–Richter's empirical relation of earthquake-frequency and time process of historic and recent earthquakes along the eastern and western segments shows that the earthquake activity obeys a Poisson process, and these calculations indicate that the earthquake occurrence probability of M_S=6.0–6.9 is 0.77–0.83 in the eastern segment and the earthquake occurrence probability of M_S=7.0–7.9 is 0.78–0.80 in the western segment of the ZPSZ during a period from 2005 to 2015.