Cuttability assessment of hard coal seams

Summary A number of field and laboratory tests have been carried out on more than 15 coal seams of compressive strengths ranging from 19 MPa to 44 MPa to evolve methods which would help in the selection of suitable coaling machines for hard coal seams. The effect of physico-mechanical properties on cuttability were studied in the laboratory for all these coal seams to identify the relevant parameters affecting the specific energy of coal cuttability. These data were subjected to regression analysis to find the best fit for estimation of laboratory specific energy of coal samples on the basis of simple laboratory and field tests for the strength parameters. Field studies were also conducted over a large number of active mechanized coal faces to study in situ cuttability along with the geo-mining conditions of the site. The field and the laboratory data so generated were correlated and an attempt is made to establish a relationship for estimating the field specific energy for a particular capacity of coaling machines by considering the geo-mining domain of the field in totality.     

Shear sense inversion in the Hilti mantle section (Oman ophiolite) and active mantle uprise

Structural analyses in the well-exposed Hilti mantle section in the Oman ophiolite suggest a model of forceful horizontal flow in the uppermost mantle at the edge of a diapir below a oceanic spreading center. Detailed structural mapping, focussed on high-T deformation (i.e., asthenospheric flow), revealed a gently undulated flat structure with a uniform east-west flow direction. When it is related to the N–S to NNW–SSE trending, vertical sheeted dike complex located to the east, this mantle flow is parallel to the spreading direction. Because the Moho is so flat lying, a large dunite occurrence at the south-western region is possibly ascribed to the Moho Transition Zone. Kinematic analysis shows that the shear direction generally changes from top-to-the west in the upper level, to top-to-the east in the lower level with respect to the Moho. This shear sense inversion is explained by a model of forceful flow due to an active mantle uprise and it is not compatible with a passive mantle uprise. In the plan section, the boundary of the shear sense inversion is subparallel to the flow direction and subperpendicular to the spreading axis. In cross section, the boundary appears to occur at various depths in the range of 200 m to 500 m. It shows that the active mantle uprise in the diapir center resulted in a channelled horizontal flow.     

Mineralogy of gold in the Elshitsa massive sulphide deposit, Sredna Gora zone, Bulgaria

The Elshitsa volcanic hosted massive sulphide deposit occurs in the central part of the Srena Gora metallogenic zone in Bulgaria. The gold-bearing massive sulphide mineralization is considered to be the product of an island arc volcano-plutonic process and hydrothermal activity that took place during the Late Cretaceous. In addition to the major gold-hosted opaque minerals such as pyrite, chalcopyrite, sphalerite and galena there are minor phases of tennantite, goldfieldite, Se-bearing aikinite, native silver and bornite in the massive sulphide lenses and stringer zones. Most of the sulphide minerals are Se-bearing. All of the six mineral assemblages that were deposited during the pyrite and copper-pyrite stages of mineralization are gold-bearing. The gold tenor as a rule is less than 1 g/t. Native gold and electrum occur as blebs or intergranular particles in the sulphide minerals. Gold in the early massive pyrite is of submicroscopic type (< 0,1 μm) and of colloidal ori-gin. Pyrite deformation and recrystallization in the temperature range 250°–160 °C has led to Au and Ag migration to cracks and grain boundaries of the sulphide minerals. As a result of these process the native gold and electrum grain size increases from submicroscopic (< 0,1 μm) in the early colloform pyrite to microscopic (0,1–100 μm) and macroscopic (> 100 μm) in the late gold-sulphide assemblages. The electrum fineness in 41 individually studied grains varies between 780 and 992‰ with a mean of 895‰. Native silver was found in association with bornite. Cu, Te, Sb and Bi are the most common trace-elements in gold and electrum. The Cu-Zn-Pb association is most important as a Au-Ag-carrier. A model for gold behaviour during sulphide deformation is proposed involving coarsening of gold grain size from the earlier to the later sulphide mineral assemblages. Received: 4 December 1995 / Accepted: 23 September 1996     

Natural attenuation, biostimulation and bioaugmentation on biodegradation of polycyclic aromatic hydrocarbons (PAHs) in mangrove sediments

The biodegradability of a mixture of PAHs, namely fluorene (Fl), phenanthrene (Phe) and pyrene (Pyr), in mangrove sediment slurry was investigated. At the end of week 4, natural attenuation based on the presence of autochthonous microorganisms degraded more than 99% Fl and Phe but only around 30% of Pyr were degraded. Biostimulation with addition of mineral salt medium degraded over 97% of all three PAHs, showing that nutrient amendment could enhance Pyr degradation. Bioaugmentation with inoculation of a PAH-degrading bacterial consortium enriched from mangrove sediments did not show any promotion effect and the degradation percentages of three PAHs were similar to that by natural attenuation. Some inhibitory effect was observed in bioaugmentation treatment in week 1 with only 50% Fl and 70% Phe degraded. These results indicate that autochthonous microbes may interact and even compete with the enriched consortium during PAH biodegradation. Natural attenuation appeared to be the most appropriate way to remedy Fl- and Phe-contaminated mangrove sediments while biostimulation was more capable to degrade Pyr-contaminated sediments. The study also shows that although a large portion of the added PAHs (more than 95%) was adsorbed onto the sediments at the beginning of the experiment, most PAHs were degraded in 4 weeks, suggesting that the degraders could utilize the adsorbed PAHs efficiently.     

Fine grain sediment transport and deposition in the Patos Lagoon–Cassino beach sedimentary system

Extensive mud deposits superimposed on the predominantly sandy inner continental shelf adjacent to the Patos Lagoon estuary, indicates that the Lagoon is a potential source of fine sediments to the coastal sedimentary system. The lagoon is large and shallow, and the water movement is mainly controlled by wind-driven set-up and set-down. The mean river inflow is around 2000 m³ s⁻¹, although peak flow rates exceeding 20,000 m³ s⁻¹ have been observed during El Niño periods. Though the tidal elevations are small, tidal velocities in the lagoon's inlet can be significant due to the large extension of the backwaters. Moreover, significant exchange flows can be generated between the estuary and coastal area due to barotropic pressure gradients established as a function of wind and freshwater discharge. The predominant net flow is seawards, but opposite near-bed flows due to pronounced vertical salinity stratification can also be observed. The coastal area is characterized by small tidal effects, large scale ocean circulation, wind-induced residual flows and wave-driven currents, where the waves originate from swell or are locally generated.     

Surveying Upstate NY Well Water for Pesticide Contamination: Cayuga and Orange Counties

Private wells in Cayuga and Orange counties in New York were sampled to determine the occurrence of pesticide contamination of groundwater in areas where significant pesticide use coincides with shallow or otherwise vulnerable groundwater. Well selection was based on local groundwater knowledge, risk modeling, aerial photo assessments, and pesticide application database mapping. Single timepoint samples from 40 wells in each county were subjected to 93‐compound chromatographic scans. All samples were nondetects (reporting limits ≤1 μg/L), thus no wells from either county exceeded any of 15 state groundwater standards or guidance values. More sensitive enzyme‐linked immunosorbent assays (ELISA) found two wells with quantifiable atrazine in each county (0.1–0.3 μg/L), one well with quantifiable diazinon (0.1 μg/L) in Orange County, and one well with quantifiable alachlor (0.2 μg/L) in Cayuga County. Trace detections (<0.1 μg/L) in Cayuga County included atrazine (five wells), metolachlor (six wells), and alachlor (one well), including three wells with multiple detections. All 12 Cayuga County wells with ELISA detections had either corn/grain or corn/forage rotations as primary surrounding land uses (although 20 other wells with the same land uses had no detections) and all quantified detections and most trace detections occurred in wells up to 9‐m deep. Orange County trace (<0.1 μg/L) ELISA detections (atrazine three wells, diazinon one well, and metolachlor five wells) and quantified detections were only generally associated with agricultural land uses. Finding acceptable drinking water quality in areas of vulnerable groundwater suggests that water quality in less vulnerable areas will also be good.     

A Methodology for Clustering Lakes in Alberta on the basis of Water Quality Parameters

In this study, a methodology for clustering 18 lakes in Alberta, Canada using the data of 19 water quality parameters for a period of 11 years (1988–2002) is presented. The methods consist of (i) principal component analysis (PCA) to determine the dominant water quality parameters, (ii) cluster analysis techniques to develop the characteristics of the clusters, and (iii) pattern‐match lakes to determine the appropriate cluster for each of the lakes. The PCA revealed that three principal components (PCs) were able to explain ～88% of the variability and the dominant water quality parameters were total dissolved solids, total phosphorus, and chlorophyll‐a. We obtained five clusters for the period 1994–1997 by using the dominant parameters with water quality deteriorating as the cluster number increased from 1 to 5. Upon matching cluster patterns with the entire dataset, it was observed that some of the lakes belonged to the same cluster all the time (e.g., cluster 1 for lakes Elkwater, Gregg, and Jarvis; cluster 3 for Sturgeon; cluster 4 for Moonshine; and cluster 5 for Saskatoon), while others changed with time. This methodology could be applied in other regions of the world to identify the most suitable source waters and prioritize their management. It could be helpful to analyze the natural controlling processes, pollution types, impact of seasonal changes and overall quality of source waters. This methodology could be used for monitoring water bodies in a cost effective and efficient way by sampling only less number of dominant parameters instead of using a large set of parameters.     

Silicate and carbonate weathering in the drainage basins of the Ganga-Ghaghara-Indus head waters: Contributions to major ion and Sr isotope geochemistry

The role of silicate and carbonate weathering in contributing to the major cation and Sr isotope geochemistry of the headwaters of the Ganga-Ghaghara-Indus system is investigated from the available data. The contributions from silicate weathering are determined from the composition of granites/ gneisses, soil profiles developed from them and from the chemistry of rivers flowing predominantly through silicate terrains. The chemistry of Precambrian carbonate outcrops of the Lesser Himalaya provided the data base to assess the supply from carbonate weathering. Mass balance calculations indicate that on an average ∼ 77% (Na + K) and ∼ 17% (Ca + Mg) in these rivers is of silicate origin. The silicate Sr component in these waters average ∼40% and in most cases it exceeds the carbonate Sr. The observations that (i) the⁸⁷Sr/⁸⁶Sr and Sr/Ca in the granites/gneisses bracket the values measured in the head waters; (ii) there is a strong positive correlation between⁸⁷Sr/⁸⁶Sr of the rivers and the silicate derived cations in them, suggest that silicate weathering is a major source for the highly radiogenic Sr isotope composition of these source waters. The generally low⁸⁷Sr/⁸⁶Sr (< 0.720) and Sr/Ca (∼ 0.2 nM/ μM) in the Precambrian carbonate outcrops rules them out as a major source of Sr and⁸⁷Sr/⁸⁶Sr in the headwaters on a basin-wide scale, however, the high⁸⁷Sr/⁸⁶Sr (∼ 0.85) in a few of these carbonates suggests that they can be important for particular streams. The analysis of⁸⁷Sr/⁸⁶Sr and Ca/Sr data of the source waters show that they diverge from a low⁸⁷Sr/⁸⁶Sr and low Ca/Sr end member. The high Ca/Sr of the Precambrian carbonates precludes them from being this end member, other possible candidates being Tethyan carbonates and Sr rich evaporite phases such as gypsum and celestite. The results of this study should find application in estimating the present-day silicate and carbonate weathering rates in the Himalaya and associated CO₂ consumption rates and their global significance.