Measuring tree stem diameters using intensity profiles from ground-based scanning lidar from a fixed viewpoint

This paper presents a method for using the intensity of returns from a scanning light detection and ranging (lidar) system from a single viewing point to identify the location and measure the diameter of tree stems within a forest. Such instruments are being used for rapid forest inventory and to provide consistent supporting information for airborne lidars. The intensity transect across a tree stem is found to be consistent with a simple model parameterised by the range and diameter of the trunk. The stem diameter is calculated by fitting the model to transect data. The angular span of the stem can also be estimated by using a simple threshold where intensity values are tested against the expected intensity for a stem of given diameter. This is useful when data are insufficient to fit the model or the stem is partially obscured. The process of identifying tree positions and trunk diameters is fully automated and is shown to be successful in identifying a high proportion of trees, including some that are partially obscured from view. The range and bearing to trees are in excellent agreement with field data. Trunk angular span and diameter estimations are well correlated with field measurements at the plot scale. The accuracy of diameter estimation is found to decrease with range from the scanning position and is also reduced for stems subtending small angles (less than twice the scanning resolution) to the instrument. A method for adjusting survey results to compensate for trees missed due to obscuration from the scanning point and the use of angle count methods is found to improve basal area estimates and achieve agreement within 4% of field measurements.     

Constructing a Near Real‐time Space‐time Cube to Depict Urban Ambient Air Pollution Scenario

This study adopts a near real‐time space‐time cube approach to portray a dynamic urban air pollution scenario across space and time. Originating from time geography, space‐time cubes provide an approach to integrate spatial and temporal air pollution information into a 3D space. The base of the cube represents the variation of air pollution in a 2D geographical space while the height represents time. This way, the changes of pollution over time can be described by the different component layers of the cube from the base up. The diurnal ambient ozone (O₃) pollution in Houston, Texas is modeled in this study using the space‐time air pollution cube. Two methods, land use regression (LUR) modeling and spatial interpolation, were applied to build the hourly component layers for the air pollution cube. It was found that the LUR modeling performed better than the spatial interpolation in predicting air pollution level. With the availability of real‐time air pollution data, this approach can be extended to produce real‐time air pollution cube is for more accurate air pollution measurement across space and time, which can provide important support to studies in epidemiology, health geography, and environmental regulation.     

Reviewers of the Journal of Geodesy for Volume 79

Acknowledgement for Referees

Reviewers of the Journal of Geodesy for Volume 79     

Effect of signal contamination in matched-filter detection of the signal on a cluttered background

To derive a matched filter for detecting a weak target signal in a hyperspectral image, an estimate of the band-to-band covariance of the target-free background scene is required. We investigate the effects of including some of the target signal in the background scene. Although the covariance is contaminated by the presence of a target signal (there is increased variance in the direction of the target signature), we find that the matched filter is not necessarily affected. In fact, if the variation in plume strength is strictly uncorrelated with the variation in background spectra, the matched filter and its signal-to-clutter ratio (SCR) performance will not be impaired. While there is little a priori reason to expect significant correlation between the plume and the background, there usually is some residual correlation, and this correlation leads to a suppressing effect that limits the SCR obtainable even for strong plumes. These effects are described and quantified analytically, and the crucial role of this correlation is illustrated with some numerical examples using simulated plumes superimposed on real hyperspectral imagery. In one example, we observe an order-of-magnitude loss in SCR for a matched filter based on the contaminated covariance.     

Application of S-SEBI model for crop evapotranspiration using Landsat-8 data over parts of North India

Estimation and monitoring of crop evapotranspiration (ET_c) or consumptive water use over large-area holds the key to irrigation management plans and regional drought preparedness. The objective of this study was to estimate ET_c by applying the simplified-surface energy balance index (S-SEBI) model to Landsat-8 data for the 2014–2015 period in parts of North India. An average ET_c was estimated 2.72 and 2.47 in mm day^?1 with 0.22, 0.18 standard deviation and 0.11, 0.07 standard error for Kharif and Rabi crops, respectively. On validation part, a close relationship was observed between S-SEBI derived and scintillometer observed evaporative fraction with 0.85 correlation coefficient and 0.86 agreement index. The statistical analysis also endorses the results accuracy and reliability with 0.026 and 0.602, relative root-mean square errors and model efficiency for wheat crop, respectively. The study showed that normalized difference vegetation index and LST are closely related and serve as a proxy for qualitative representation of ET_c.     

Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.     

Variability analysis of groundwater levels — AGIS-based case study

The present study has analyzed the variability in depth to water level below ground level (bgl) vis-à-vis groundwater development and rainfall from 1987 to 2007 in agriculture dominated Kaithal district of Haryana state in India. Spatial distribution of groundwater depth was mapped and classified into different zones using ILWIS 3.6 GIS tools. Change detection maps were prepared for 1987–1997 and 1997–2007. Groundwater depletion rates during successive decades were compared and critical areas with substantial fall in groundwater levels were identified. Further, block wise trends of change in groundwater levels were also analyzed. The water table in fresh belt areas of the district (Gulha, Pundri and Kaithal blocks) was observed to decline by a magnitude ranging from 10 m to 23 m. In Kalayat and Rajaund blocks, the levels were found fluctuating in a relatively narrow range of 4–9 m. During 1997–2007, the depletion has been faster compared to the preceding decade. Excessive groundwater depletion in major part of the district may be attributed to indiscriminate abstraction for irrigation and decrease in rainfall experienced since 1998. Changes in cropping pattern and irrigation methods are needed in the study area for sustainable management of the resource.     

Generalization of total least-squares on example of unweighted and weighted 2D similarity transformation

In this contribution it is shown that the so-called “total least-squares estimate” (TLS) within an errors-in-variables (EIV) model can be identified as a special case of the method of least-squares within the nonlinear Gauss–Helmert model. In contrast to the EIV-model, the nonlinear GH-model does not impose any restrictions on the form of functional relationship between the quantities involved in the model. Even more complex EIV-models, which require specific approaches like “generalized total least-squares” (GTLS) or “structured total least-squares” (STLS), can be treated as nonlinear GH-models without any serious problems. The example of a similarity transformation of planar coordinates shows that the “total least-squares solution” can be obtained easily from a rigorous evaluation of the Gauss–Helmert model. In contrast to weighted TLS, weights can then be introduced without further limitations. Using two numerical examples taken from the literature, these solutions are compared with those obtained from certain specialized TLS approaches.