Catastrophic debris flows near Machu Picchu village (Aguas Calientes), Peru

Slope movements together with intensive river erosion and the following accumulation are the leading processes in the landscape evolution in the area of Machu Picchu village (former Aguas Calientes), which is located close to the Machu Picchu Sanctuary. Debris flows affect not only the bottoms of valleys or canyons, but also debris fans at the termini of the drainage basins, which are heavily inhabited at some places. The most recent event in the Machu Picchu village occurred in April 2004, but several others were documented in a broader area in the last 50 years. The field inspections at Machu Picchu (May and September 2004; June and September 2005) together with oral testimony revealed the nature and behavior of the debris flow. Machu Picchu village can be assessed as a zone with high landslide risk in relation to its urban development. Despite that, the village recorded a rapid growth (threefold population increase) without urban control within the past two decades. Precipitation, which is the main triggering factor of the debris flows, and natural hazard management of the Machu Picchu village are discussed in this paper.     

The Spačice eclogite: constraints on the P–T–t history of the Gföhl granulite terrane, Moldanubian Zone, Bohemian Massif

Summary In the Kutná Hora Complex, the Běstvina Formation, which is similar to Gf?hl granulite, contains eclogite that has escaped widespread retrograde recrystallization. The eclogite assemblage, garnet + omphacite + quartz + rutile ± plagioclase, yields an estimate for peak metamorphic conditions of 18–20 kbar and 835–935 °C, which is comparable to that determined from felsic granulite, 14–20 kbar and 900–1000 °C. Garnet in eclogite exhibits both prograde and retrograde compositional zoning, from which constraints on thermal history of the Gf?hl terrane can be derived by diffusion modelling. At 900 °C, a garnet grain of 800–1000 μm radius would homogenize in 7.5–11.7 million years, but the existence of compositional gradients on a length scale of 100–200 μm suggests that the duration of peak metamorphism may have been limited to ∼500,000 years. Diffusion modelling of retrograde zoning in garnet yields a cooling rate of 150–100 °C/m.y. for a radius of 800–1000 μm and initial temperature of 900 °C. The relatively brief duration of high-pressure/high-temperature metamorphism and rapid cooling and exhumation of the Gf?hl terrane may be a consequence of lithospheric delamination during Early Carboniferous collision of Bohemia (Teplá-Barrandia) and Moldanubia (Franke, 2000).     

Factors influencing the presence or absence of tributary-junction fans in the Iberian Range, Spain

This paper analyses the factors which influence the presence or absence of tributary-junction fans in the Iberian Range, northern Spain. Two valleys were selected, both characterised by wide variations in lithology, altitude, land use and plant cover. Two groups of factors were studied: those related to the internal characteristics of the drainage basins, which particularly control sediment generation; and those related to the characteristics of the depositional area which control accommodation space and main river power. Among the internal factors, the development of alluvial fans was related to: (i) the capacity of the basin to yield large volumes of sediment, (ii) the occurrence of intense human pressure until recent times, a good indicator of sediment yield, and (iii) the capacity of the basin to quickly increase discharge during rainstorms (discharge density and torrentiality). It is suggested that the areas that were intensively cultivated in the past, and have therefore been affected by intense erosion, have played a decisive role on the development of alluvial fans. This would imply that many of these alluvial fans have a relatively recent origin, perhaps related to the beginning of a widespread deforestation. The basins without alluvial fans are characterised by relatively steep hillslope gradients (that is, slopes that never were subjected to historical cultivation), low drainage densities and dense forest and shrub cover, mostly coinciding with high altitude basins composed of quartzite and shale bedrocks. Regarding the external factors, the shape, size and longitudinal gradient of the main river to which the fans are tributary are the most relevant conditioning factors determining the development of alluvial fans.     

Avalanche Risk During Backcountry Skiing – An Analysis of Risk Factors

Skier-triggered avalanches are the main cause of avalanche accidents in backcountry skiing. The risk of accidents during backcountry skiing was analysed statistically and related to factors such as elevation level, aspect, stability rating and the time of the year. The analysis is based on a database about terrain usage and avalanche accidents from a large heli-skiing operator in Canada, which makes it possible to study the conditional probability of accidents given the recorded pattern of terrain usage. This study shows that the historical risk of accidentally triggering an avalanche greater than size 1 depends highly on the stability rating, with the highest risk occurring during “poor” stability. The risk is greater at high elevations, and it is lower during the late season than earlier on. Skier risk does not depend as much on aspect as may be indicated from avalanche data alone. However, it is relatively high in the N–NE–E sector. These factors are not independent of each other and therefore analyses of combined factors were also performed. Questionnaires and interviews were used to gain knowledge about the terrain selection of professional mountain guides. These results indicate that when selecting terrain, guides first look at the overall shape and size of the terrain, but avalanche history of terrain and inclination are also important factors. Finally, remarks in avalanche reports were analysed, and common human factors identified.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Daily Meteorological Observations in Cádiz – San Fernando. Analysis of the Documentary Sources and the Instrumental Data Content (1786–1996)

Meteorological observations in the city of Cádiz are acknowledged as having been made from the middle of the 18th century onwards although they were only recorded and preserved in documentary form from 1789 onwards. Data readings were taken at the new Naval Observatory in San Fernando, ten kilometres from Cádiz, from 1797 onwards. Continuous series for temperature and atmospheric pressure at a daily resolution have been compiled and constructed from 1817 until 1996. The data series is composed of thrice daily observations made at Cádiz (1821–1880) by local observers and hourly data from Naval Observatory at San Fernando (1870–1996).     

U–Pb ages of the Dalsfjord Complex, SW Norway, and their bearing on the correlation of allochthonous crystalline segments of the Scandinavian Caledonides

The Dalsfjord Complex is an allochthonous crystalline unit in the hanging wall of a major extensional detachment of the Caledonian orogen on the western coast of Norway. U-Pb geochronology has been carried out to test a previously proposed correlation between this unit and the Jotun Nappe Complex, a member of the Middle Allochthon now occupying a foreland position to the east. A monzonite sample of the Dalsfjord suite yields a zircon age of 1,634Dž Ma, whereas a crosscutting gabbro was formed at 1,464Lj Ma. Both rocks were strongly overprinted during the Sveconorwegian orogeny, especially the monzonite whose zircons U-Pb data were strongly pulled towards a lower intercept age of 882ᆱ Ma, and whose titanite indicates a two-stage growth history at >960 Ma and <920 Ma. These relationships support the correlation of these units with the Jotun Complex, and to some degree also with the Lindås Nappe in the Bergen Arcs.     

A Re–Os study of sulfide minerals from the Bagdad porphyry Cu–Mo deposit, northern Arizona, USA

Rhenium and osmium isotopes in sulfide minerals from the Bagdad porphyry Cu–Mo deposit have been used to determine timing of mineralization and the source of osmium and, by inference, ore metals. Molybdenite, chalcopyrite and pyrite were analyzed mainly from the quartz monzonite and porphyritic quartz monzonite units, which are characterized by moderate to strong potassic alteration (secondary biotite and K-feldspar). Rhenium concentrations in molybdenite are between 330 and 642 ppm. Four Re–Os analyses of two molybdenite samples from the quartz monzonite and porphyritic quartz monzonite yield a weighted average age of 71.8±0.2 Ma (2s). Analyses of a third sample from a molybdenite vein in Precambrian rocks, outside of the main ore zone, yield a weighted average age of 75.9±0.2 Ma (2s), and provide evidence of two separate mineralization episodes. Chalcopyrite samples contain 6 to 12 ppt Os and 1.7 to 4.1 ppb Re; ¹⁸⁷Os/ ¹⁸⁸Os initial ratios are between 0.1 and 0.8. Pyrite samples have osmium and rhenium concentrations varying in the range 8–17 ppt and 3.9–6.8 ppb, respectively. Analyses from these pyrite samples yield an eight-point isochron with an age of 77±15 Ma (2s) and an initial ¹⁸⁷Os/ ¹⁸⁸Os ratio of 2.1±0.8 (MSWD=0.90). The results presented here add to the growing body of work indicating that porphyry-type mineralization is produced by long-term, multiple episodes of magmatism and associated mineralization. The data also support the hypothesis that a significant part of the metals and magmas may have a crustal source, as has been suggested for other copper deposits and districts in Arizona.