Up-to-date urban rainstorm intensity formulas considering spatial diversity in China

With accelerating urbanization in China, urban waterlogging has had a serious impact on urban sustainable development and citizen welfare. Simple urban rainstorm intensity formulas with a monotonous frequency distribution type cannot meet the practical needs of urban drainage planning and design. This study focuses on the development of urban rainstorm intensity formulas based on spatial diversity in China. Using the annual maximum sampling method, rainstorm data of 607 cities throughout China were collected into a database, with a total of 24,933 rainfall samples (annual observations) under various specified precipitation durations. The database was used to verify that integrating the Pearson III and Gumbel distributions would constitute an optimal theoretical distribution type, owing to its small error and increased fitting precision. Modification and coordination of four important parameters in the rainstorm intensity formula were done using a digital elevation model, which improved the accuracy of the formula. In addition, precipitation distributions in China were treated from the perspective of topographic features to validate the calculations from up-to-date formulas. Accuracy assessment was accomplished using a national code (GB-50014-2006), GIS-based isograms, and authoritative results from the Hydrological Bureau of the Ministry of Water Resources. This work provides a comprehensive foundation for the establishment of an up-to-date rainstorm intensity formula for China, which can be used widely in different cities.     

Extreme deformation characteristics and countermeasures for a tunnel in difficult grounds in southern Shaanxi,China

The Qingling–Bashan (QB) mountain region in southern Shaanxi mainly consists of strongly compressive zones from east to west, with tight folds and compressive fractures. There is a wide distribution of soft rocks of various types, such as phyllite and slate, accompanied by complex geological structures. Ironically, tunnel construction in these difficult grounds with complicated geological conditions embraces a high risk of extreme deformation due to various unpredictable reasons, which can frequently cause collapse and result in budget overruns during the construction period. Therefore, it is crucial to conduct effective countermeasures to eliminate or avoid such adverse impacts. This paper provides a case study on the “Yingfeng tunnel” (a tunnel constructed in soft rock consisting of a slate ground) based on a geological survey, indoor experiments and in situ monitoring. A successive rock mass deformation resulted in the tunnel lining seriously intruding into construction clearance and some other sections, even collapsing during the construction. The maximum displacement amount was 62.5 cm, while the maximum deformation speed reached as high as 34.18 mm/day. Additionally, to evaluate the construction impacts of tunnelling-induced geo-hazards, an investigation on extreme deformation was conducted. Considering the time-dependent features of the rock mass deformation, the constraint-convergence method was used to put forward applicable countermeasures in this paper. Finally, from the feedbacks of monitoring results, extreme deformation of the Yingfeng tunnel was effectively controlled.     

Socioenvironmental issues of river bed material extraction in the Himalayan piedmont (India)

The present study focuses on the Balason river running through the Himalayan piedmont zone (near Siliguri, India). The objective of the study is an assessment of the environmental effects of river bed material extraction by humans and the dependence of indigenous people on the river and its ecosystem services. The analysis is based on results of field work consisting of geodetic measurements of the river channel and interviews among the local community from the Nimtijot village. Historical hydrological data were also used for the study. The results of the investigation show that the Balason river is heavily affected by excessive exploitation of river bed material during dry season and the replenishment of extracted material in a monsoon season is not always sufficient. It leads to channel deepening. The local community working in the river heavily depends for its livelihood on continuing this activity. A decreasing amount of bed material to be extracted may lead to degradation of the strong relationship between the local community and their natural environment (river).     

Study on the natural radioactivity level of stone coal-bearing strata in East China

Based on γ-radiation dose rate and radon concentration measurements and ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K radionuclide testing, this study identifies the radioactive anomalies of stone coal-bearing strata in East China and evaluates the natural radioactivity levels in the air, solid, water and plant media in the typical area of the regional stone coal-bearing layers. The stone coal-bearing strata in East China occur in the lower Cambrian system along the margin of the Yangtze block; additionally, the radioactive anomaly area is sporadically distributed in the stone coal-bearing layers. The background values of ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K are higher in the stone coal-bearing areas, and the spatial distribution of these natural radionuclides shows significant variability. ²³⁸U and ²²⁶Ra clearly accumulate in the coal, coal gangue and soil and are the main sources of the environmental radiation in coal mines. The γ-radiation shows a higher background value in the stone coal-bearing area, and this radioactive pollution cannot be ignored. Typically, the effective dose of γ-radiation exceeds the limit value of 5 mSv/a, and the total α and total β concentrations of the groundwater are 10–30 times the limit value at some points. The residents near the mining area are subjected to a higher radiation dose, and the groundwater, building materials, and plants have been contaminated by the radioactive pollution sporadically through time. It is necessary to strengthen the monitoring work of radioactive environments and to take appropriate control measures.     

The synergistic effect of calcium on organic carbon sequestration to ferrihydrite

Sequestration of organic carbon (OC) in environmental systems is critical to mitigating climate change. Organo-mineral associations, especially those with iron (Fe) oxides, drive the chemistry of OC sequestration and stability in soils. Short-range-ordered Fe oxides, such as ferrihydrite, demonstrate a high affinity for OC in binary systems. Calcium commonly co-associates with OC and Fe oxides in soils, though the bonding mechanism (e.g., cation bridging) and implications of the co-association for OC sequestration remain unresolved. We explored the effect of calcium (Ca²⁺) on the sorption of dissolved OC to 2-line ferrihydrite. Sorption experiments were conducted between leaf litter-extractable OC and ferrihydrite at pH 4 to 9 with different initial C/Fe molar ratios and Ca²⁺ concentrations. The extent of OC sorption to ferrihydrite in the presence of Ca²⁺ increased across all tested pH values, especially at pH ≥ 7. Sorbed OC concentration at pH 9 increased from 8.72 ± 0.16 to 13.3 ± 0.20 mmol OC g^?1 ferrihydrite between treatments of no added Ca²⁺ and 30 mM Ca²⁺ addition. Batch experiments were paired with spectroscopic studies to probe the speciation of sorbed OC and elucidate the sorption mechanism. ATR-FTIR spectroscopy analysis revealed that carboxylic functional moieties were the primary sorbed OC species that were preferentially bound to ferrihydrite and suggested an increase in Fe-carboxylate ligand exchange in the presence of Ca at pH 9. Results from batch to spectroscopic experiments provide significant evidence for the enhancement of dissolved OC sequestration to 2-line ferrihydrite and suggest the formation of Fe–Ca-OC ternary complexes. Findings of this research will inform modeling of environmental C cycling and have the potential to influence strategies for managing land to minimize OM stabilization.     

Heavy metal exposure from co-processing of hazardous wastes for cement production and associated human risk assessment

This study was carried out to determine the concentration of heavy metals (Cd, Ni, Pb, Cr, Ni and Zn) in ordinary Portland cement (OPC) produced from the co-processing with hazardous waste in comparison with OPC produced using natural raw materials. The results showed that the concentration of heavy metals in cement produced from natural raw material was in the order of Zn > Pb > Cr > Ni > Cu > Cd. Zn and Cd were the highest and the lowest concentrations, respectively, in cements produced from the co-processing activity. The difference between heavy metals concentrations in OPC produced with and without co-processing was found to be statistically significant. The concentration of heavy metals in the cement produced is generally factory dependent. The human risk assessment associated with the heavy metals for non-carcinogenic and carcinogenic risks has been evaluated. The calculated hazard index (HI) and total lifetime cancer risks (LCR) were lower than the acceptable threshold reference values, HI < 1 and LCR < 1 × 10^?4, respectively. Thus, it is anticipated that there is no potential of non-carcinogenic and carcinogenic risks for both adult and children. However, the findings indicated that there is a need for regulatory monitoring. The exposure pathway for both non-carcinogenic and carcinogenic risks are both in the order of ingestion > dermal > inhalation.     

Convergence analysis of fixed stress split iterative scheme for anisotropic poroelasticity with tensor Biot parameter

We perform a convergence analysis of the fixed stress split iterative scheme for the Biot system modeling coupled flow and deformation in anisotropic poroelastic media with tensor Biot parameter. The fixed stress split iterative scheme solves the flow subproblem with all components of the stress tensor frozen using a multipoint flux mixed finite element method, followed by the poromechanics subproblem using a conforming Galerkin method in every coupling iteration at each time step. The coupling iterations are repeated until convergence and Backward Euler is employed for time marching. The convergence analysis is based on studying the equations satisfied by the difference of iterates to show that the fixed stress split iterative scheme for anisotropic poroelasticity with Biot tensor is contractive. We also demonstrate that the scheme is numerically convergent using the classical Mandel’s problem solution for transverse isotropy.     

Prediction of Engineering Properties of Basalt Rock in Jordan Using Ultrasonic Pulse Velocity Test

Basalt is an extrusive igneous rock derived from Lava and spread over different localities in Jordan. It can be used in industrial applications, and as construction materials. Before using basalt, it is essential to determine its dry density, porosity, uniaxial compressive strength, and Brazilian tensile strength. The testing procedure and sample preparation used to determine the engineering properties are time-consuming and need expertise. Hence, the ultrasonic pulse velocity (UPV) test, a quick and non-destructive evaluation method, was used to determine the engineering properties. Empirical relationships for determination of dry density, porosity, uniaxial compressive strength, Brazilian tensile strength, and tangent modulus of elasticity were deduced. Good correlation coefficients (R²?=?0.832–0.929) were obtained between UPV and dry density, porosity, uniaxial compressive strength, Brazilian tensile strength and modulus of elasticity. These correlations were limited to intact basalt with UPV?≥?4000 m/s.