雅鲁藏布江缝合带西段错不扎铬铁矿特征及形成环境

雅鲁藏布江蛇绿岩带是国内铬铁矿床出露点最多,且铬铁矿石储量、产量最大的一个蛇绿岩带。根据空间展布规律,该岩带被划分为东段(曲水—墨脱)、中段(昂仁—仁布)和西段(萨嘎至中印边境)3部分。其中,西段自萨嘎以西分为南、北两支亚带。长期以来的研究工作主要集中在东段和中段,西段的研究程度非常薄弱,尤其是北亚带。不同区段研究程度的不平衡十分不利于雅鲁藏布江蛇绿岩带内铬铁矿找矿工作的开展。错不扎蛇绿岩体位于雅鲁藏布江缝合带西段的北亚带,呈北西-南东向带状产出,主要由方辉橄榄岩组成,并普遍发育基性岩脉。野外地质调查在该蛇绿岩体中发现了多个铬铁矿化点,矿化体呈透镜状产于方辉橄榄岩中,出露地表的长度为0.5～1m,厚为0.2～0.5 m,矿石均为致密块状。电子探针分析结果表明,错不扎铬铁矿属于高铬型铬铁矿,铬尖晶石的Cr#[=100×Cr/(Cr+Al)]为75～78,Mg#[=100×Mg/(Mg+Fe2+)]为66～69。计算结果表明,母岩浆的FeO/MgO比值为0.51～0.65,Al2O3和Ti O2含量分别为11.27%～12.1%和0.19%～0.4%,与玻安质岩浆的化学成分相当。然而,针状单斜辉石出溶体的发现指示错不扎铬铁矿可能还经历了一个深部作用过程。     

基于区间非概率可靠性方法的岩溶区桩基下溶洞顶板稳定性评价

岩溶区桩基下溶洞顶板稳定性影响因素取值的不确定性及其样本数量的有限性,给桩基下溶洞顶板稳定性的评价带来了一定困难。根据现有研究成果,建立桩基下溶洞顶板抗冲切、抗剪切和抗弯力学简化模型,并从理论上推导相应的稳定性验算公式。在此基础上,结合区间分析理论和结构非概率可靠性度量方法,提出了基于区间非概率可靠性方法的桩基下溶洞顶板稳定性评价方法。该方法采用MATLAB中的INTLAB工具箱进行区间运算,并运用截断法消除运算过程中的区间扩展现象,最后通过比较溶洞顶板体系的非概率可靠性指标η与1的大小来判断桩基下溶洞顶板稳定性。以丹霞高速互通中D匝道2#桩基下溶洞为例,计算出该桩基下溶洞顶板体系的非概率可靠性指标η=7.95,该值大于1说明该桩基下溶洞顶板处于稳定状态,且评价结果与工程实际相符,表明了该方法的合理性与可行性。分别以3种功能函数为单位,研究当区间变量的变异系数C不同时(C从0.01递增至0.1),对应非概率可靠性指标η的变化规律。研究表明,随各区间变量变异系数C的增大,相应非概率可靠性指标呈不同程度的降低,其中溶洞顶板厚度h的变异性对评价结果影响最大,其次为桩端阻力分担比T,桩顶反力F的影响相对最小。     

贵州省松桃县桃子坪隐伏超大型锰矿床地质特征及潜力分析

贵州松桃桃子坪超大型锰矿床是华南南华纪武陵锰矿成矿带中松桃寨英-西溪堡(Ⅳ级)地堑盆地中发现的第二个超大型"大塘坡式"锰矿床,与亚洲最大的松桃普觉超大型锰矿紧邻,位于西溪堡(Ⅳ级)地堑盆地北西侧的渗漏喷溢中心相-过渡相-边缘相。矿体埋深9202 000 m,为全隐伏锰矿床。含锰岩系厚度15. 70 91. 00 m、锰矿体厚度1. 07 14. 58 m。含锰岩系与锰矿体空间展布的长轴方向呈狭长带状沿北东约65°方向展布,与地表北东向的燕山期构造存在约40°夹角。目前该锰矿床北东和南西侧矿体均未圈边,还存在较大的锰矿找矿潜力。     

深部切顶沿空成巷关键参数研究及工程应用

传统充填沿空留巷工艺繁琐﹑留巷速度慢,与现代化高强度开采要求不相适应,由此提出了切顶沿空成巷无煤柱开采新技术,其中关键参数设计是该技术的核心问题之一,对留巷的稳定性具有较大影响。以城郊煤矿21304工作面为研究背景,采用理论分析、数值模拟和现场试验等方法,对切顶沿空成巷关键参数进行了系统研究。基于岩石碎胀自承特性和围岩结构“S-R”稳定原理,推导出切顶高度﹑切顶角度的理论计算公式;建立了聚能爆破力学模型,并结合数值模拟和现场试验,确定了聚能爆破装药量及钻孔间距。研究结果表明：合理的切顶参数能够切断巷道顶板与采空区岩层间的力学关系,使采空区顶板沿切缝顺利垮落,碎胀的矸石可有效支撑上覆顶板,限制其回转下沉,减弱覆岩运动对留巷的扰动作用,沿空巷道围岩变形量明显减小。根据理论计算﹑数值分析和现场试验研究成果,确定了城郊煤矿21304工作面切顶沿空成巷关键参数,并在现场进行了应用,回采后沿空巷道侧向顶板能够迅速切落形成巷帮,留巷稳定后各项指标均能满足现场使用要求。     

考虑含水合物沉积物损伤的多场耦合模型研究

天然气水合物是一种新型的清洁能源,具有广阔的应用前景。但在水合物开采过程中温压条件的改变会引起水合物的分解,导致含水合物沉积物胶结强度的丧失;同时,沉积物在加载过程中由于其内部微裂纹、缺陷逐渐扩展以及土颗粒间的水合物逐渐破碎也会引发含水合物沉积物的损伤,而以往对于水合物分解过程中多场耦合模型的研究忽略了沉积物结构损伤演化过程及其对耦合过程的影响。因此,基于连续损伤理论,在损伤统计本构模型中引入三参数的Weibull分布和残余强度修正系数,建立起考虑损伤阈值和残余强度影响的含水合物沉积物损伤统计本构模型;进而将本构模型嵌入到水合物分解过程的多场耦合模型中,建立了考虑含水合物沉积物损伤的温度-应力-渗流-化学（THMC）多场耦合数学模型;基于该模型讨论了含水合物沉积物结构损伤对水合物分解过程中沉积物储层的变形、压力、温度等因素的影响规律。通过计算分析发现：含水合物沉积物结构损伤对水合物分解的多场耦合过程具有显著影响,并且随着分解时间的增加,其影响逐渐增大。     

Geochemical Characteristics of Wuyang Siliceous Rocks in the Southern Margin of North China Craton and its Constraint on the Formation Environment of BIF of Tieshanmiao Formation

Precambrian banded iron formation(BIF) is one of the most important mineral resources in China, mostly abundant in the North China Craton(NCC) with relatively less common in South China. Since the BIF and siliceous rocks both originated from chemical deposition, the syngenetic BIF and Siliceous rocks can help evaluate their environment of formation. We examine here the mineralogy and geochemistry of siliceous rocks associated with the Tieshanmiao Formation BIF, aiming to decipher the conditions of formation of both BIF and Siliceous rocks in the Wuyang area in the NCC. Analysis of the geochemical characteristics of whole rock shows that the Si O2 content of the siliceous rock ranges from 90.11% to 94.85% and is relatively high overall. Trace element contents of Ba and U are also high, the Ba/Sr ratio ranges from 3.89 to 25.28 and the U/Th ratio ranges from 0.09 to 0.20. Finally, the ΣREE value of rare earth elements ranges from 57.03 ppm to 152.59 ppm, and these indexes all indicate that siliceous rock resulted from hydrothermal deposition. Plots of Al2 O3-Si O2, Si O2/(K2 O+Na2 O)-Mn O2/Ti O2 and Mn-10×(Cu+Co+Ni)-Fe in discrimination diagrams also verify this interpretation. However, both the Mg O content, ranging from 0.16 to 0.32, and the Fe/Ti ratio, ranging from 2.50 to 9.72, suggest that terrigenous material was added during the depositional process. Major and trace element parameters of siliceous rock, such as the Al/(A1+Fe+Mn) ratio(from 0.81 to 0.93), Mn O/Ti O2(from 0.00 to 0.17), Al/(Al+Fe)(from 0.82 to 0.93), Sc/Th ratio(from 0.21 to 0.50), U/Th(from 0.09 to 0.20),(La/Yb)N(from 0.83 to 3.04), and the(La/Ce)N(from 0.01 to 0.02) all imply that the siliceous rock formed in a continental margin. In addition, the Sr/Ba ratio from 0.08 to 0.26, the δCe value from 0.31 to 0.90, and the δEu value from 0.14 to 0.58, all indicate that the siliceous rock was formed at a relatively deeper water depth and under weak hydrodynamic conditions. Siliceous rock and BIF formed in the same geological setting, with the Si O2/(K2 O+Na2 O) ratio of siliceous rock ranging from 28.61 to 47.43, the Si O2/Al2 O3 ratio from 16.53 to 32.37, and the Si O2/Mg O ratio from 287.28 to 592.81, which are all in agreement with chemical deposition associated with volcanic eruptions. The Al2 O3/Ti O2 ratio from 37.82 to 50.30 indicates that the magma source of siliceous rock was of slightly intermediate composition. During the Late Archean in the Wuyang area, the high concentration and high purity Si O2 quickly precipitated from hydrothermal fluids to finally result in the accumulation of siliceous rock in a marginal sea, while the input corresponding to iron formation components was deposited to form iron formation layers, and limestone was only the product formed during the deposition intervals of siliceous rock and iron formations. In this study, the synsedimentary siliceous rocks of BIF act as a new way to provide direct evidence to understand the formation environment of BIF due to its high geochemical stability.