POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

Detection of a dry-frozen boundary inside Martian regolith

The present work investigates the time oscillations of the temperature at several depths of a Martian soil analogue made of two layers of different physical properties. The maximum temperature-time oscillation inside the Martian soil analogue, DT, and its derivative with depth, d(DT)/dz or DDT, can be analysed to understand the presence of a boundary between dry and frozen soil. The maximum temperature-time oscillation, DT, reduces by about one order of magnitude at the boundary between dry and frozen soil if a frozen layer is present. The reduction of DT at the boundary between two dry soils with different porosity is much smaller. DDT decreases by more than one order of magnitude at the boundary between dry and frozen soil if a frozen layer is present. The reduction of DDT at the boundary between two dry soils with different porosity is much smaller.     

Forest structure of a maple old-growth stand: a case study on the Apennines mountains (Southern Italy)

In Europe, very small forest areas can be considered to be old-growth, and they are mainly located in Eastern Europe. The typical structures of old growth forests infrequently occur in Mediterranean mountainous environments, since they have been affected by human activities for centuries. This study focused on a remote and almost pure Italian maple stand located in southern Italy, which has not been managed for long time due to its inaccessibility. The effects of natural evolution on the forest stand were evaluated through the analysis of the spatial and chronological structure and the regeneration patterns, then estimating the amounts and quality of deadwood occurrence. Across the whole stand, all the trees with DBH (diameter at breast height) larger than 50 cm (LLT, large living trees) were measured (DBH and height) and age was also determined through a dendrochronological approach. The diameters observed ranged between 50 and 145 cm with ages of 120 to 250 years. The Latham index calculated for trees within the sample plot highlighted a multilayered canopy with a dominant layer of large living trees (age > 120 years). The size-class distribution of stems had a reverse-J shape, and basal area was 52 m² ha^-1. Deadwood was exclusively constituted by standing dead trees and CWD and its volume was on average 31 m³ ha^-1.Pure Italian maple forests are generally rare in Europe, and it was unexpected to find a forest stand characterized by a so complex structure with old growth attributes. The study of complex forest stand, even if small, could give precious information on the forest evolution, clarifying also diverse auto-ecological traits of tree species that usually are not common in our forests.     

Three-dimensional tomographic inversion of the seismic velocity structure of the crust and upper mantle of northwestern Nicaragua

Journal of Seismology - A three-dimensional tomographic image of the seismic velocity structure in the crust and upper mantle of northwestern Nicaragua was performed using the back-projection...     

Olive tree phenology and climate variations in the Mediterranean area over the last two decades

The flowering characteristics of plant species of economic interest and the influence of climate on them are of great importance considering the implications for fruit setting and the final harvest: Olive is one of the typical species of the Mediterranean habitat. We have investigated the timing of olive full flowering during the anthesis period and flowering intensity over a period of 20 years (1990–2009), in three major cultivation areas of the Mediterranean basin: Italy, Spain and Tunisia. The importance of these characteristics from a bioclimatic point of view is considered. The biological behaviour was studied to determine its main relationships with temperature and water availability, considering also the different sub-periods and the bio-climatic variations during the study period. The flowering dates and pollen emissions show different behaviours for the Spanish monitoring area in comparison with the other two olive cultivation areas. In the Italian and Tunisian areas, the flowering period over the last decade has become earlier by about 5 and 7 days, respectively, in comparison to the previous decade. Moreover, pollen emissions have decreased in Perugia (Italy) and Zarzis (Tunisia) over the period of 2000–2009, while in Cordoba (Spain), they showed their highest values from 2005 to 2009. The climate analysis has shown an increase in temperature, which results in an increase in the growing degree days for the growth of the olive flower structures, particularly in the more northern areas monitored. Although the olive tree is a parsimonious water consumer that is well adapted to xeric conditions, the increase in the potential evapotranspiration index over the last decade in the Italian and Tunisian olive areas might create problems for olive groves without irrigation, with a negative influence on the flowering intensity. Overall, in all of these Mediterranean monitoring areas, the summer water deficit is an increasingly more important parameter in comparison to the winter parameters, which confirms that the winter period is not as limiting as the summer period for olive tree cultivation in these Mediterranean areas.     

Integration of earth observation and census data for mapping a multi-temporal flood vulnerability index: a case study on Northeast Italy

Climate sciences foresee a future where extreme weather events could happen with increased frequency and strength, which would in turn increase risks of floods (i.e. the main source of losses in the world). The Mediterranean basin is considered a hot spot in terms of climate vulnerability and risk. The expected impacts of those events are exacerbated by land-use change and, in particular, by urban growth which increases soil sealing and, hence, water runoff. The ultimate consequence would be an increase of fatalities and injuries, but also of economic losses in urban areas, commercial and productive sites, infrastructures and agriculture. Flood damages have different magnitudes depending on the economic value of the exposed assets and on level of physical contact with the hazard. This work aims at proposing a methodology, easily customizable by experts’ elicitation, able to quantify and map the social component of vulnerability through the integration of earth observation (EO) and census data with the aim of allowing for a multi-temporal spatial assessment. Firstly, data on employment, properties and education are used for assessing the adaptive capacity of the society to increase resilience to adverse events, whereas, secondly, coping capacity, i.e. the capacities to deal with events during their manifestation, is mapped by aggregating demographic and socio-economic data, urban growth analysis and memory on past events. Thirdly, the physical dimension of exposed assets (susceptibility) is assessed by combining building properties acquired by census data and land-surface characteristics derived from EO data. Finally, the three components (i.e. adaptive and coping capacity and susceptibility) are aggregated for calculating the dynamic flood vulnerability index (FVI). The approach has been applied to Northeast Italy, a region frequently hit by floods, which has experienced a significant urban and economic development in the past decades, thus making the dynamic study of FVI particularly relevant. The analysis has been carried out from 1991 to 2016 at a 5-year steps, showing how the integration of different data sources allows to produce a dynamic assessment of vulnerability, which can be very relevant for planning in support of climate change adaptation and disaster risk reduction.

     

A new method for specular and diffuse pseudorange multipath error extraction using wavelet analysis

Multipath remains one of the major challenges in Global Navigation Satellite System (GNSS) positioning because it is considered the dominant source of ranging errors, which can be classified into specular and diffuse types. We present a new method using wavelets to extract the pseudorange multipath in the time domain and breaking it down into the two components. The main idea is an analysis-reconstruction approach based on application of both continuous wavelet transform (CWT) and discrete wavelet transform (DWT). The proposed procedure involves the use of L1 code-minus-carrier (CMC) observable where higher-frequency terms are isolated as residuals. CMC residuals are analyzed by applying the CWT, and we propose the scalogram as a technique for discerning time–frequency variations of the multipath signal. Unlike Fourier transform, the potential of the CWT scalogram for examining the non-stationary and multifrequency nature of the multipath is confirmed as it simultaneously allows fine detection and time localization of the most representative frequencies of the signal. This interpretation of the CWT scalogram is relevant when choosing the levels of reconstruction with DWT, allowing accurate time domain extraction of both the specular and diffuse multipath. The performance and robustness of the method and its boundary applicability are assessed. The experiment was carried out using a receiver of Campania GNSS Network. The results are given in which specular multipath error is achieved using DWT level 7 approximation component and diffuse multipath error is achieved using DWT level 6 denoised detail component.     

Parallel finite element algorithm with domain decomposition for three-dimensional magnetotelluric modelling

We present a new finite element (FE) method for magnetotelluric modelling of three-dimensional conductivity structures. Maxwell's equations are treated as a system of first-order partial differential equations for the secondary fields. Absorbing boundary conditions are introduced, minimizing undesired boundary effects and allowing the use of small computational domains. The numerical algorithm presented here is an iterative, domain decomposition procedure employing a nonconforming FE space. It does not use global matrices, therefore allowing the modellization of large and complicated structures. The algorithm is naturally parallellizable, and we show results obtained in the IBM SP2 parallel supercomputer at Purdue University. The accuracy of the numerical method is verified by checking the computed solutions with the results of COMMEMI, the international project on the comparison of modelling methods for electromagnetic induction.