Proglacial Sediment—Landform Associations of a Polythermal Glacier: Storglaciären, Northern Sweden

Mapping and laboratory analysis of the sediment—landform associations in the proglacial area of polythermal Storglaciären, Tarfala, northern Sweden, reveal six distinct lithofacies. Sandy gravel, silty gravel, massive sand and silty sand are interpreted as glaciofluvial in origin. A variable, pervasively deformed to massive clast‐rich sandy diamicton is interpreted as the product of an actively deforming subglacial till layer. Massive block gravels, comprising two distinctive moraine ridges, reflect supraglacial sedimentation and ice‐marginal and subglacial reworking of heterogeneous proglacial sediments during the Little Ice Age and an earlier more extensive advance. Visual estimation of the relative abundance of these lithofacies suggests that the sandy gravel lithofacies is of the most volumetric importance, followed by the diamicton and block gravels. Sedimentological analysis suggests that the role of a deforming basal till layer has been the dominant factor controlling glacier flow throughout the Little Ice Age, punctuated by shorter (warmer and wetter climatic) periods where high water pressures may have played a more important role. These results contribute to the database that facilitates discrimination of past glacier thermal regimes and dynamics in areas that are no longer glacierized, as well as older glaciations in the geological record.     

Rates of deformation of an extensional growth fault/raft system (offshore Congo, West African margin) from combined accommodation measurements and 3-D restoration

The aim of this paper is to quantify the evolution in time and space of the accommodation (space available for sedimentation) in the case of a growth fault structure resulting from gravity‐induced extension comprising a listric fault/raft system located along the West African margin. To achieve this, use was made of an original approach combining two complementary techniques (accommodation variation measurements and 3‐D restoration) in order to quantify vertical and horizontal displacement related to deformation, using a data set made up of a 3‐D seismic survey and well logs. We applied sequence stratigraphic principles to (i) define a detailed stratigraphic framework for the Albo‐Cenomanian and (ii) measure subsidence rates from accommodation variations. 3‐D restoration was used to (iii) reconstruct the evolution of the 3‐D geometry of the fault system. The rates of horizontal displacement of structural units were measured and linked to successive stages in the growth of the fault system. Subsidence of the structural units exhibits three scales of variation: (1) long‐term variation (10 Ma) of c. 80 m Ma^?1 for a total subsidence of about 1400 m, compatible with the general subsidence of a passive margin, and (2) short‐term variations (1–5 Ma) corresponding to two periods of rapid subsidence (about 150–250 m Ma^?1) alternating with periods of moderate subsidence rate (around 30 m Ma^?1). These variations are linked to the development of the fault system during the Albian (with downbuilding of the raft and development of the initial basin located in between). During the Cenomanian, the development of the graben located between the lower raft and the initial basin did not seem to affect the vertical displacements. (3) High‐frequency variations (at the scale of genetic unit sets) range between ?50 and 250 m for periods of 0.2–2 Ma. Accommodation variations governed these cycles of progradation/retrogradation rather than sediment flux variations. In addition, the nine wells display a highly consistent pattern of variation in accommodation. This suggests that the genetic unit sets were controlled at a larger scale than the studied system (larger than 20 km in wavelength), for example, by eustatic variations. Translation rates are between 3 and 30 times higher than subsidence rates. Therefore, in terms of amplitude, the main parameter controlling the space available for sedimentation is the structural development of the fault system, that is to say, the seaward translation of the raft units, itself resulting from a regional gravity‐driven extension.     

Hydrologic and geomorphic processes in the Colville River delta, Alaska

The Colville basin drains the North Slope of Alaska and is one of several large Arctic river systems located within permafrost. The timing and style of fluvial processes in the earth's permafrost regions differ from those occurring in midlatitude settings. Moreover, in comparison to temperate-zone systems, rivers located entirely within permafrost perform most of their work during relatively short periods of time. This paper examines river ice hydrology and the resulting geomorphic processes that occur within the Colville delta, Alaska. Fluvial processes and landform development within the Colville delta occur after the flood-pulse is initiated by the breakup of river ice. During this 4-month period, the geomorphic processes are largely influenced by the movement of ice. The flood-pulse and accompanying river ice influences erosional and depositional processes and results in unique styles of sediment transport, deposition, and riverbank erosion.     

Habitat, occurrence and conservation of Saharo-Arabian-Turanian element Forsskaolea tenacissima L. in the Iberian Peninsula

The aim of this study is to assess the Iberian populations of Forsskaolea tenacissima L. according to its biogeographical interest, habitat, geographical range and conservation status. Results point out that they are restricted to gravel wadis of Tabernas Desert (SE Spain), are scarcely included in protected areas and represent historically isolated populations with relict behaviour. We also describe a new association, Senecioni-Forsskaoleetum tenacissimae. Conservation status of species is cause for concern and two conservation actions must be carried out. Firstly, protected areas should house Forsskaolea populations and secondly, phytosociological characterization of a community allows inventorying its habitat and directing conservation efforts to community level.     

Exploring some relationships between biological soil crusts, soil aggregation and wind erosion

A portable wind tunnel was used to test the contribution of biological and physical elements to overall soil aggregation on a soil dominated by biological soil crusts in south-eastern Australia. After moderate disturbance and simulated wind erosion, 90% of surface aggregates on the loamy soil and 76% on the sandy soil were dominated by biological elements (cryptogams). Lower levels of biological bonding were observed on the severely disturbed treatment. Linear regression indicated a significant positive relationship (r²=0·72) between biological soil crust cover and dry aggregation levels greater than 0·85mm. To maintain sediment transport below an erosion control target of 5gm⁻¹s⁻¹ for a 65kmh⁻¹ wind at 10m height, a crust cover of approximately 20% is required. When a multiple regression model which sequentially fitted biological crust cover and dry aggregation greater than 0·85mm was applied to the data, dry aggregation accounted for more of the variation in sediment transport rate than biological crust cover. These data were used to develop a conceptual model which integrates crust cover and dry aggregation, and provides a useful framework within which to predict the likely impacts of changes in soil crust cover and aggregation.     

阿尔金断裂带晚第四纪左旋走滑速率及其构造运动转换模式讨论

在高分辨率SPOT卫星数字影像和大比例尺航片处理、断错地貌制图、野外核实与位移测量基础上, 利用宇宙成因核素(¹⁰Be, ²⁶Al)、碳十四(¹⁴C)和热释光(TL)等多种测年手段, 厘定了各断错地貌面的形成年龄, 得到了阿尔金断裂带不同段落全新世左旋走滑速率: 阿克赛以西的中、西段左旋走滑速率可达(17.5±2) mm/a, 肃北-石包城段为(11±3.5) mm/a左右, 疏勒河口段减少到(4.8±1) mm/a左右, 东端宽滩山段仅约(2.2±0.2) mm/a, 左旋走滑速率突变点位于阿尔金断裂带中东段存在分支活动逆断层向南东扩展的肃北、石包城和疏勒河等三联点上. 矢量分析表明, 三联点东、西两侧左旋滑动速率的减少量转换成了阿尔金断裂带中东段南盘北西向活动逆断层上的地壳缩短和上盘推覆体抬升, 形成了党河南山、大雪山、祁连山等条块山地. 因此, 青藏高原北部物质向东挤出的速率和幅度是有限的, 符合“叠瓦状逆冲转换——有限挤出模型”.     

Focused ion beam technique and transmission electron microscope studies of microdiamonds from the Saxonian Erzgebirge, Germany

A focused ion beam of Ga ions is a relatively new technique that has been developed for microelectronic industries. Now researchers of the Earth sciences find it to be a promising tool for studying various geological materials. Using the FIB technique and an FEI Strata DB 235 dual beam system, we have successfully prepared several electron-transparent foils, which crossed μm-sized diamonds included in host minerals such as zircon and garnet from quartzofeldspathic rocks of the Saxonian Erzgebirge, Germany. Scanning and transmission electron microscopy applied to these foils revealed that the diamonds contain crystalline nanometric inclusions. These inclusions consist of minerals of known stoichiometries such as SiO₂ and Al₂SiO₅, whereas others are characterized by different combinations of Si, K, P, Ti, and Fe in the presence of oxygen (stoichiometries are not clear at this stage of research). One suite of inclusions is assumed to be represented by archerite, KH₂PO₄, which is known to be stable at pressures of 4–22 GPa, and one nanocrystal containing Pb, oxygen and carbon is interpreted to be Pb_xO_y or PbCO₃. Along with solid crystalline inclusions, the diamonds contain cavities filled by liquid/gas that escaped during sample preparation. These are associated with dislocations of diamond growth. Our data are consistent with the concept of diamond crystallization from a COH-rich multicomponent supercritical fluid and suggest that the composition of such a fluid is more consistent with a local crustal source rather than that of a mantle origin.     

Analytical Model for Permeability Evolution in Microcracking Rock

— Analytical expressions to predict the enhancement of permeability due to stress-induced microcracking in initially low porosity rock are presented. A fracture mechanical microcrack model is employed to derive integrated effective hydraulic variables as a function of stress, which are then used to calculate the evolution of permeability using the statistically-based Dienes model. The model enables determination of permeability enhancement as a function of two loading parameters and three material parameters. Results are in reasonable agreement with experimental measurements and indicate that appreciable increases in permeability can be anticipated during brittle failure. The analytical nature of the model makes it easily incorporatable into numerical models that require quantification of the permeability evolution as a function of stress, for which there is currently no law.     

Earthen barriers to control lava flows in the 2001 eruption of Mt. Etna

Preceded by four days of intense seismicity and marked ground deformation, a new eruption of Mt. Etna started on 17 July and lasted until 9 August 2001. It produced lava emission and strombolian and phreatomagmatic activity from four different main vents located on a complex fracture system extending from the southeast summit cone for about 4.5 km southwards, from 3000 to 2100 m elevation (a.s.l.). The lava emitted from the lowest vent cut up an important road on the volcano and destroyed other rural roads and a few isolated country houses. Its front descended southwards to about 4 km distance from the villages of Nicolosi and Belpasso. A plan of intervention, including diversion and retaining barriers and possibly lava flow interruption, was prepared but not activated because the flow front stopped as a consequence of a decrease in the effusion rate. Extensive interventions were carried out in order to protect some important tourist facilities of the Sapienza and Mts. Silvestri zones (1900 m elevation) from being destroyed by the lava emitted from vents located at 2700 m and 2550 m elevation. Thirteen earthen barriers (with a maximum length of 370 m, height of 10–12 m, base width of 15 m and volume of 25 000 m³) were built to divert the lava flow away from the facilities towards a path implying considerably less damage. Most of the barriers were oriented diagonally (110–135°) to the direction of the flow. They were made of loose material excavated nearby and worked very nicely, resisting the thrust of the lava without any difficulty. After the interventions carried out on Mt. Etna in 1983 and in 1991–1992, those of 2001 confirm that earthen barriers can be very effective in controlling lava flows.