The distribution of tritium and CFCs in the Weddell Sea during the mid-1980s

Transient tracer data (tritium, CFC11 and CFC12) from the southern, central and northwestern Weddell Sea collected during Polarstern cruises ANT III-3, ANT V-2/3/4 and during Andenes cruise NARE 85 are presented and discussed in the context of hydrographic observations. A kinematic, time-dependent, multi-box model is used to estimate mean residence times and formation rates of several water masses observed in the Weddell Sea.Ice Shelf Water is marked by higher tritium and lower CFC concentrations compared to surface waters. The tracer signature of Ice Shelf Water can only be explained by assuming that its source water mass, Western Shelf Water, has characteristics different from those of surface waters. Using the transient nature of tritium and the CFCs, the mean residence time of Western Shelf Water on the shelf is estimated to be approximately 5 years. Ice Shelf Water is renewed on a time scale of about 14 years from Western Shelf Water by interaction of this water mass with glacial ice underneath the Filchner-Ronne Ice shelf. The Ice Shelf Water signature can be traced across the sill of the Filchner Depression and down the continental slope of the southern Weddell Sea. On the continental slope, new Weddell Sea Bottom Water is formed by entrainment of Weddell Deep Water and Weddell Sea Deep Water into the Ice Shelf Water plume. In the northwestern Weddell Sea, new Weddell Sea Bottom Water is observed in two narrow, deep boundary currents flowing along the base of the continental slope. Classically defined Weddell Sea Bottom Water (θ ≤ −0.7°C) and Weddell Sea Deep Water (−0.7°C ≤ θ ≤ 0°C) are ventilated from the deeper of these boundary currents by lateral spreading and mixing. Model-based estimates yield a total formation rate of 3.5Sv for new Weddell Sea Bottom Water (θ = −1.0°C) and a formation rate of at least 11Sv for Antarctic Bottom Water (θ = −0.5°C).     

Prediction of hydrodynamic forces on submarine pipelines using an improved Wake II Model

The hydrodynamic force model for prediction of forces on submarine pipelines as described includes flow history effect (wake effects) and time dependence in the force coefficients. The wake velocity correction is derived by using a closed-form solution to the linearized Navier–Stokes equations for oscillatory flow. This is achieved by assuming that the eddy viscosity in the wake is only time dependent and of a harmonic sinusoidal form. The forces predicted by the new Wake (Wake II) Model have been compared to Exxon Production Research Company Wake Model in terms of time histories (force shape) and magnitudes of peak forces. Overall, the model predictions by the Wake II Model are satisfactory and represent a substantial improvement over the predictions of the conventional models. The conventional force models representing adaptations of Morison's equation with ambient velocity and constant coefficients give predictions that are in poor agreement with the measurements especially for the lift force component. The Wake II Force Model can be used for submarine pipeline on-bottom stability design calculations for regular waves with various pipe diameters.     

Bathymetry,substrate and fishing areas of Southeast Atlantic high-seas seamounts

Most of the Southeast Atlantic Ocean is abyssal, and global bathymetries suggest that only ～3.2% of the areas beyond national jurisdiction (ABNJ; also known as the high seas, as defined in the United Nations Convention on the Law of the Sea [UNCLOS]) are shallower than 2 500 m. This study mapped bathymetry and characterised substrates in selected seamount summit areas, including several that have been or may become fishing areas. The southernmost location, the Schmitt-Ott Seamount, has exposed volcanic bedrock with surrounding flats covered by thin biogenic sediments and/or coral rubble that appears ancient. At Wüst, Vema, Valdivia and Ewing seamounts the basaltic base appears to be overlain by coral caps and other coral substrates (sheets, rubble). Adjacent summit plains have biogenic sediments of varying thickness. Vema has a flat, roughly circular summit, <100 m deep, with the shallowest point being a 22-m-deep summit knoll; the upper slopes have ancient coral framework, but the summit has a mixture of coralline and volcanic rock and coarse sediments, including extensive areas with coralline algae and kelp forests. Valdivia Bank is a 230-m-deep, flat, rocky area (～11 × 5 km), protruding steeply from the extensive multi-summit Valdivia subarea of the Walvis Ridge. The distribution of past fisheries in the Convention Area of the South East Atlantic Fisheries Organisation (SEAFO) was considered in relation to the new information on bathymetry and substrate.     

Field Placement and Evaluation of Stabilized Dredged Material (SDM) from the New York/New Jersey Harbor

Since the 1997 local ban on ocean dumping of dredged sediments, the States of New York and New Jersey have pursued a policy of environmentally sound solutions to the management of dredged material, including beneficial use of stabilized dredged material (SDM) in transportation applications. A pilot study was initiated in 1998 to evaluate the use of SDM in the construction of highway embankments. Utilizing 80,000 cubic yards of dredged material, two embankments were constructed from SDM on a commercial development area adjacent to the Harbor. Geotechnical properties and handling of SDM were evaluated both during and one year post - construction. This article presents the evaluation of the embankments themselves, including constructability and performance. The results demonstrate that SDM satisfies most of the geotechnical criteria for fill construction, except those for durability, requiring proper coverage and protection similar to that provided for fills constructed on cohesive soils. This same characteristic precludes long term stockpiling of SDM prior to final placement, limiting applications to those that have schedules overlapping with dredging projects. Increased costs for the use of SDM can be as high as $8 per cubic yard over traditional fills; however, this cost may be recouped through management fees collected from dredging projects.     

On the use of poorly soluble hygroscopic substances for modification of warm clouds and fogs

From analysis of the relationships between the equilibrium state of condensation nuclei and the relative humidity, a conclusion is made concerning the preferred use of poorly soluble substances for the generation of artificial condensation nuclei (ACN) designed for modification of warm clouds and fogs with the purpose of their dissipation and precipitation formation. The advantage of poorly soluble substances over commonly used soluble salts is that the finely dispersed part of the spectrum of the poorly soluble ACN does not deliquesce and so is not involved in the formation of cloud droplets. For experimental testing of the conclusions, preference was given to cement, whose main soluble substance is calcium oxide with a solubility of about 1 g/l. The spectrum of dispersed cement particles was measured and compared with the spectra of pyrotechnic flares widely used for modification at present. The process of formation of the cloud droplet spectra was simulated in the aerosol chamber of the Institute of Experimental Meteorology by decreasing the preliminarily generated excess pressure. It was found in these experiments that, compared to the spectra of particles formed on background condensation nuclei, the introduction of dispersed cement leads to the broadening of spectra and to a decrease in the concentration of droplets. Even at the early stage of condensation, droplets with radii of ∼20 μm appear. In this case, no “overseeding” phenomenon is observed, which, for soluble substances, manifests itself in an increase in the concentration of cloud droplets with a large ACN concentration. These effects indicate that, according to the existing concepts about the mechanism of warm-cloud modification with hygroscopic substances, the introduction of poorly soluble ACN (in particular, dispersed cement) below the base of cumulus clouds should stimulate coagulation processes and accelerate rain-formation processes. Considerations are given that the introduction of poorly soluble ACN into the already existing cumulus or stratocumulus clouds or fogs should also result in the acceleration of precipitation-formation processes or cloud dispersal. Comparison of cement powder with the well-known means of warm-cloud and fog modification is carried out. Original Russian Text ? N.P. Romanov, A.S. Drofa, N.S. Kim, A.V. Savchenko, G.F. Yaskevich, 2006, published in Izvestiya AN. Fizika Atmosfery i Okeana, 2006, Vol. 42, No. 1, pp. 80–91.     

Spectral-temporal structure of variations in the atmospheric total ozone in central Eurasia

The results of long-term (1980–2003) systematic measurements of the total ozone content at the Issyk Kul station (42.6° N, 77.0° E; 1650 m above sea level) are presented. The statistical characteristics and spectral structure of variations in the total ozone and the main tendencies of its temporal variability are determined. It is found that the total ozone content decreased in 1980–2003 at an average rate of (?1.29±0.08) DU/yr. The results of Fourier and wavelet analyses have shown that only oscillations with periods of 12, 27–29, and 102–105 months are rather stable and can be represented as harmonic oscillations. Oscillations with periods shorter than six months have the character of periodically arising pulsations. Among these, oscillations with periods of 27–29 and 34–37 days can be distinguished. It is noted that the spectral-temporal structure of variations in the total ozone content obtained from ground-based measurements at the Issyk Kul station is in good agreement with the corresponding structure obtained from TOMS satellite measurements.     

Remote determination of momentum-flux profiles in the lower atmospheric boundary layer

An acoustic locator—a sodar—is a unique instrument for getting the objective characteristics of the current state of the atmospheric boundary layer (ABL) owing to a combination of such properties as remoteness, mobility, resolution, and information content. This study demonstrates the capabilities of a sodar to obtain data on the second moments of the field of wind-velocity fluctuations, in particular, the profiles of momentum flux in the lower ABL, which are very important in practical applications. A corresponding method is described, and the results of its experimental verification and some examples of its application under the conditions of different ABL stratification are presented.     

Three-parameter model of turbulence for the atmospheric boundary layer over an urbanized surface

A modified three-parameter model of turbulence for a thermally stratified atmospheric boundary layer (ABL) is presented. The model is based on tensor-invariant parametrizations for the pressure-strain and pressure-temperature correlations that are more complete than the parametrizations used in the Mellor-Yamada model of level 3.0. The turbulent momentum and heat fluxes are calculated with explicit algebraic models obtained with the aid of symbol algebra from the transport equations for momentum and heat fluxes in the approximation of weakly equilibrium turbulence. The turbulent transport of heat and momentum fluxes is assumed to be negligibly small in this approximation. The three-parameter E ? ε ? 2> model of thermally stratified turbulence is employed to obtain closed-form algebraic expressions for the fluxes. A computational test of a 24-h ABL evolution is implemented for an idealized two-dimensional region. Comparison of the computed results with the available observational data and other numerical models shows that the proposed model is able to reproduce both the most important structural features of the turbulence in an urban canopy layer near the urbanized ABL surface and the effect of urban roughness on a global structure of the fields of wind and temperature over a city. The results of the computational test for the new model indicate that the motion of air in the urban canopy layer is strongly influenced by mechanical factors (buildings) and thermal stratification.     

Water vapor in the atmosphere over the northern Tien Shan

Refined data of systematic measurements of total water vapor in the atmosphere from May 1980 to April 2005 are presented. The data were obtained at the Issyk Kul atmospheric-monitoring station by the method of solar molecular-absorption spectroscopy. Over 25 years, the annual mean water-vapor content in the atmosphere increased by 4.5% at a mean rate of increase of 0.18% per year. However, the water-vapor content decreased in the last five years. The results of statistical processing of experimental data (general statistical characteristics, correlation coefficients, composite oscillations) are described. A refined model is proposed for forecasts of temporal variations in the monthly mean and annual mean water-vapor contents for the coming years. The model includes a linear trend and the sum of oscillations with periods close to the periods of a number of well-known geophysical phenomena. Regression equations are proposed to relate the water-vapor content in the atmospheric column to the surface temperature and absolute humidity.