Fe‐Mg interdiffusion profiles in rimmed forsterite grains in the Allende matrix: Time–temperature constraints for the parent body metamorphism

The Allende matrix is dominated by micron‐sized lath‐shaped fayalitic olivine grains with a narrow compositional range (Fa_40–50). Fayalitic olivines also occur as rims around forsterite grains in chondrules and isolated forsterite fragments in the matrix or as veins cross‐cutting the grains. Allende is a type 3 CV carbonaceous chondrite having experienced a moderate thermal metamorphism. There is therefore a strong chemical disequilibrium between the large forsterite grains and the fayalite‐rich fine‐grained matrix. Chemical gradients at interfaces are poorly developed and thus not accessible using conventional techniques. Here, we used analytical transmission electron microscopy to study the microstructure of the fayalite‐rich matrix grains and interfaces with forsterite fragments. We confirm that fayalitic grains in the matrix and fayalitic rims around forsterite fragments have the same properties, suggesting a common origin after the accretion of the parent body of Allende. Composition profiles at the rim/forsterite interfaces exhibit a plateau in the rim (typically Fa₄₅), a compositional jump of 10 Fa% at the interface, and a concentration gradient in the forsterite grain. Whatever the studied forsterite grain or whatever the nature of the interface, the Fe‐Mg profiles in forsterite grains have the same length of about 1.5 μm. This strongly suggests that the composition profiles were formed by solid‐state diffusion during the thermal metamorphism episode. Time–temperature couples associated with the diffusion process during thermal metamorphism are deduced from profile modeling. Considering the uncertainties on the diffusion coefficient value, we found that the peak temperature in Allende is ranging from 425 to 505 °C.     

High‐resolution evolution of terrigenous sediment yields in the Provence Basin during the last 6 Ma: relation with climate and tectonics

Basin‐wide correlation of Messinian units and Plio‐Quaternary chronostratigraphic markers (5.3 Ma, 2.6 Ma, 0.9 Ma and 0.45 Ma), the mapping of total sediment thickness and the determination of overall sedimentary volumes enabled us to provide a high‐resolution quantitative history of sediment volumes for the last 6 Ma along the Gulf of Lions margin. The results point to (i) a dramatic increase in terrigenous sediment input during the Messinian Salinity Crisis. This increased sedimentation reflects enhanced regional fluvial erosion related to the dramatic fall of Mediterranean base‐level. Stronger weathering due to a regional wetter climate probably also increased erosional fluxes. (ii) A sediment input three times higher during the Plio‐Quaternary compared to the Miocene seems in agreement with published measurements from World's ocean. However, the timing of this increase being uncertain, it implies that the trigger(s) also remain(s) uncertain. (iii) A decrease in detrital volume around 2.6 Ma is attributed to a regional change in the drainage pattern of rivers in the northwestern Alps. (iv) This study also highlights the Mid‐Pleistocene Revolution around 0.9 Ma, which resulted in an almost doubling of sediment input in the Provencal Basin.     

The Monitor project: rotation of low-mass stars in NGC 2362 – testing the disc regulation paradigm at 5 Myr

We report on the results of a time-series photometric survey of NGC 2362, carried out using the CTIO 4-m Blanco telescope and Mosaic-II detector as part of the Monitor project. Rotation periods were derived for 271 candidate cluster members over the mass range  0.1 ≲ M /M_⊙≲ 1.2  . The rotation period distributions show a clear mass-dependent morphology, qualitatively similar to that in NGC 2264, as would be expected from the age of this cluster. Using models of angular momentum evolution, we show that angular momentum losses over the ∼1–5 Myr age range appear to be needed in order to reproduce the evolution of the slowest rotators in the sample from the ONC to NGC 2362, as found by many previous studies. By incorporating Spitzer IRAC mid-infrared (mid-IR) measurements, we found that three to four objects showing mid-IR excesses indicative of the presence of circumstellar discs were all slow rotators, as would be expected in the disc regulation paradigm for early pre-main-sequence angular momentum evolution, but this result is not statistically significant at present, given the extremely limited sample size.     

Regolith breccia Northwest Africa 7533: Mineralogy and petrology with implications for early Mars

Northwest Africa 7533, a polymict Martian breccia, consists of fine‐grained clast‐laden melt particles and microcrystalline matrix. While both melt and matrix contain medium‐grained noritic‐monzonitic material and crystal clasts, the matrix also contains lithic clasts with zoned pigeonite and augite plus two feldspars, microbasaltic clasts, vitrophyric and microcrystalline spherules, and shards. The clast‐laden melt rocks contain clump‐like aggregates of orthopyroxene surrounded by aureoles of plagioclase. Some shards of vesicular melt rocks resemble the pyroxene‐plagioclase clump‐aureole structures. Submicron size matrix grains show some triple junctions, but most are irregular with high intergranular porosity. The noritic‐monzonitic rocks contain exsolved pyroxenes and perthitic intergrowths, and cooled more slowly than rocks with zoned‐pyroxene or fine grain size. Noritic material contains orthopyroxene or inverted pigeonite, augite, calcic to intermediate plagioclase, and chromite to Cr‐bearing magnetite; monzonitic clasts contain augite, sodic plagioclase, K feldspar, Ti‐bearing magnetite, ilmenite, chlorapatite, and zircon. These feldspathic rocks show similarities to some rocks at Gale Crater like Black Trout, Mara, and Jake M. The most magnesian orthopyroxene clasts are close to ALH 84001 orthopyroxene in composition. All these materials are enriched in siderophile elements, indicating impact melting and incorporation of a projectile component, except for Ni‐poor pyroxene clasts which are from pristine rocks. Clast‐laden melt rocks, spherules, shards, and siderophile element contents indicate formation of NWA 7533 as a regolith breccia. The zircons, mainly derived from monzonitic (melt) rocks, crystallized at 4.43 ± 0.03 Ga (Humayun et al. 2013 ) and a ¹⁴⁷Sm‐¹⁴³Nd isochron for NWA 7034 yielding 4.42 ± 0.07 Ga (Nyquist et al. 2016 ) defines the crystallization age of all its igneous portions. The zircon from the monzonitic rocks has a higher Δ¹⁷O than other Martian meteorites explained in part by assimilation of regolith materials enriched during surface alteration (Nemchin et al. 2014 ). This record of protolith interaction with atmosphere‐hydrosphere during regolith formation before melting demonstrates a thin atmosphere, a wet early surface environment on Mars, and an evolved crust likely to have contaminated younger extrusive rocks. The latest events recorded when the breccia was on Mars are resetting of apatite, much feldspar and some zircons at 1.35–1.4 Ga (Bellucci et al. 2015 ), and formation of Ni‐bearing pyrite veins during or shortly after this disturbance (Lorand et al. 2015 ).     

Pervasive shock melting at >65 GPa in a Martian basalt,the shergottite Northwest Africa 14672

Shergottites have provided abundant information on the volcanic and impact history of Mars. Northwest Africa (NWA) 14672 contributes to both of these aspects. It is a vesicular ophitic depleted olivine–phyric shergottite, with average plagioclase An₆₁Ab₃₉Or_0.2. It is highly ferroan, with pigeonite compositions En_49-25Fs_41-61Wo_10-14 like those of basaltic shergottites, for example, NWA 12335. Olivine (Fo_53-15) has discrete ferroan overgrowths, more ferroan when in contact with plagioclase than when enclosed by pyroxene. The pyroxene (a continuum of augite, subcalcic augite, and pigeonite) is patchy, with ragged “cores” enveloped or invaded by ferroan pyroxene. Magma mixing may be responsible for capture of olivine and formation of pyroxene mantles. The plagioclase is maskelynite-like in appearance, but the original laths were (congruently) melted and the melt partly crystallized as fine dendrites. Most of the 14% vesicles occur within plagioclase. Olivine, pyroxene, and ilmenite occur in part as fine aggregates crystallized after congruent melting with limited subsequent liquid mixing. There are two fine-grained melt components, barred plagioclase with interstitial Fe-bearing phases, and glass with olivine dendrites, derived by melting of mainly plagioclase and mainly pyroxene, respectively. Rare silica particles contain coesite and/or quartz, and silica glass. The rock has experienced >50% melting, compatible with peak pressure >~65 GPa. It is the most highly shocked shergottite so far, at shock stage S6/7. It may belong to the group of depleted shergottites ejected at ~1 Myr from Tooting Crater.     

Connection between micrometeorites and Wild 2 particles: From Antarctic snow to cometary ices

Abstract— We discuss the relationship between large cosmic dust that represents the main source of extraterrestrial matter presently accreted by the Earth and samples from comet 81P/Wild 2 returned by the Stardust mission in January 2006. Prior examinations of the Stardust samples have shown that Wild 2 cometary dust particles contain a large diversity of components, formed at various heliocentric distances. These analyses suggest large‐scale radial mixing mechanism(s) in the early solar nebula and the existence of a continuum between primitive asteroidal and cometary matter. The recent collection of CONCORDIA Antarctic micrometeorites recovered from ultra‐clean snow close to Dome C provides the most unbiased collection of large cosmic dust available for analyses in the laboratory. Many similarities can be found between Antarctic micrometeorites and Wild 2 samples, in terms of chemical, mineralogical, and isotopic compositions, and in the structure and composition of their carbonaceous matter. Cosmic dust in the form of CONCORDIA Antarctic micrometeorites and primitive IDPs are preferred samples to study the asteroid‐comet continuum.     

Shear modulus and damping ratio of grouted sand

An experimental comparative study of three different grouted sands in terms of their effects on the values of two dynamic properties is presented. The dynamic properties studied are the shear modulus and the damping ratio which are determined with resonant column tests and cyclic triaxial tests. The behaviour of a pure Fontainebleau sand is compared with the behaviour of a Fontainebleau sand grouted with a silicate grout, a micro-fine cement grout and a mineral grout. The effects of the grouting treatment, the type of grout, the confining pressure, and the strains, on the shear modulus and the damping ratio are studied. The test results have shown that grouting improves the stiffness of the sand especially for small strains. Whatever the type of material, confining stress improves the shear modulus whereas it has a negligible effect on the damping ratio. When strain increases, the shear modulus decreases and the damping ratio increases.     

Characterization of regional and local scattering effects from small-aperture seismic array recordings

In 1998, four small-aperture arrays separated by 20 km have been deployed in the southern French Alps in order to record the natural seismicity during two consecutive months. One of the main objectives of this experiment was to characterize the heterogeneities that influence the wavefield propagation, by analysis of the coda characteristics recorded by each of the seismic arrays.The time-azimuth-velocity characteristics of the coda phases have been obtained using a high-resolution wavenumber decomposition method.A statistical analysis, using the coda characteristics of the whole data set (20 regional earthquakes) recorded by the four arrays has been performed and lead to the calculation of the density of scattered energy within the medium. Three regional heterogeneous areas (> 10 km) have been characterized, and are located in the N–NE, W and S directions from the four arrays. Scattered energy is also located at local distances (< 10 km) from the four arrays.The comparison of the waveforms recorded (i) with one of the array, for different groups of earthquakes, and (ii) with the four arrays, for one group of earthquakes, show that the geometrical configuration of the source–scattering area–recording site system can strongly influence the energetic distributions related to the secondary phases of the seismograms.In particular cases, we experimentally show that the interactions of the direct wavefield with the heterogeneous structures of the medium can be sufficiently energetic to induce secondary scattered phases that dominate the seismic motions recorded at a given site. In such case, these effects should be taken into account for the quantification of the expected ground motion recorded during an earthquake.     

Reaction of OH Radicals with Acetone: Determination of the Branching Ratio for the Abstraction Pathway at 298 K and 1 Torr

We have determined the 2-oxo-propyl CH₃C(O)CH₂ (sometimes called 1-methylvinoxy or acetonyl) radical yield for the reaction of acetone with OH radical relative to the 2-oxo-propyl yields for the reactions of F- and Cl atoms with acetone using the Discharge Flow technique. The 2-oxo-propyl radical has been monitored by Laser Induced Fluorescence LIF at short reaction times in the systems: OH + acetone (R1), F + acetone (R2), and Cl + acetone (R3). From these measurements we have deduced the branching ratio for the 2-oxo-propyl radical formation in the title reaction to be in the range 0.8 R 1.