Introduction to hydromechanical well tests in fractured rock aquifers

This article introduces hydromechanical well tests as a viable field method for characterizing fractured rock aquifers. These tests involve measuring and analyzing small displacements along with pressure transients. Recent developments in equipment and analyses have simplified hydromechanical well tests, and this article describes initial field results and interpretations during slug and constant-rate pumping tests conducted at a site underlain by fractured biotite gneiss in South Carolina. The field data are characterized by displacements of 0.3 μm to more than 10 μm during head changes up to 10 m. Displacements are a hysteretic function of hydraulic head in the wellbore, with displacements late in a well test always exceeding those at similar wellbore pressures early in the test. Displacement measurements show that hydraulic aperture changes during well tests, and both scaling analyses and field data suggest that T changed by a few percent per meter of drawdown during slug and pumping tests at our field site. Preliminary analyses suggest that displacement data can be used to improve estimates of storativity and to reduce nonuniqueness during hydraulic well tests involving single wells.     

A local model for analysis of pump and treat systems with vertical barrier walls

We present a mathematical model of local, steady groundwater flow near a vertical barrier wall. Flow features represented in the model include an impermeable arc-shaped barrier wall and multiple wells; distant boundary conditions are not included explicitly, but their effects on the local flow field are modelled by specifying a uniform flow at infinity and a constant areal recharge within a local domain. We develop an explicit closed-form solution to the boundary-value problem using the analytic element method. The solution is an extension of a harmonic solution presented by Anderson and Mesa [Anderson EI, Mesa E. The effects of vertical barrier walls on the hydraulic control of contaminated groundwater. Adv Water Resourc 2006;29(1):89–98] which does not include the effects of recharge. We demonstrate that the general solution with recharge consists of the harmonic solution superposed on a special case of the harmonic solution along with two elementary one-dimensional flow solutions. The results are used to investigate the effects of areal recharge on the capture zone envelopes of the pumping wells and on the reduction in discharge that can be achieved by including a barrier wall in a pump and treat design. We find that the benefits of including an open barrier wall in a design, measured as a reduction in the pumping rate required to contain a plume, increase for higher recharge rates. Dimensionless plots of capture zone envelopes are presented for a practical well and barrier wall configuration.     

International co-operation on Rhine water quality 1945-2008: An example to follow?

The management of the Rhine is often seen as an exemplary case of international river basin management. In the Rhine basin, countries that went to war with each other twice in the last century have managed to reach agreements on many issues and water quality has improved considerably. The improvement in water quality is often attributed to the activities of the International Commission for the Protection of the Rhine and in particular to its Rhine Action Plan. In order to test this assertion, this paper describes and analyzes the development of international co-operation on the water quality of the Rhine since 1945. It concludes that water quality improvement cannot be attributed to any single factor. Instead, a whole array of interrelated factors are at play, including the European Union, other international fora such as the North Sea Ministerial Conferences, domestic legislation, the activities of environmental NGOs and waterworks, growing environmental awareness, and the changing structure of the industry in the basin. Because of the importance of contextual factors, the Rhine experiences cannot simply be applied to basins with a different context. In many cases, international river basin management may be promoted most effectively by promoting co-operation at the river basin level. In many other cases, however, it may be more effective to identify and then work on the contextual factors that (1) have the biggest leverage effect in the specific case and (2) can be influenced most effectively.     

Lithium isotope systematics of lavas from the Cook–Austral Islands: Constraints on the origin of HIMU mantle

Radiogenic isotope variations in lavas from the Cook–Austral volcanic chain have delineated three distinct mantle sources: a HIMU component, a depleted component (DM), and an enriched component (EM). To better constrain the mantle sources for South Pacific hot spot volcanism, we determined lithium isotopic compositions of lavas from Raivavae, Rapa, Mangaia and Tubuai of the volcanic chain. The study includes whole rock and mineral analyses. In general, δ⁷Li of most olivines resemble bulk rock composition whereas clinopyroxenes are variably lighter. This implies that clinopyroxene is more susceptible to diffusion-induced fractionation, in agreement with previous studies. Olivine δ⁷Li values span a narrower range than whole rock values, and do not extend to the very heavy compositions previously reported in HIMU bulk lavas. This discrepancy likely reflects alteration of bulk lavas, and suggests that Li-isotope analyses of bulk lavas should be interpreted with caution. Olivines from HIMU lavas have heavy δ⁷Li values (up to 6.2‰), and extend beyond the range reported for fresh MORB. Correlations between Li-isotopes and radiogenic isotopes suggest that the heavy δ⁷Li values in HIMU olivines are a source characteristic and not the result of post-magmatic alteration. Although the Li-isotope composition of recycled, dehydrated oceanic crust is currently under debate, our results suggest that HIMU lavas derive from a source containing recycled dehydrated oceanic crust, and that the “heavy” Li-isotope signature of altered oceanic crust is partially preserved during passage through the subduction factory.     

Vulnerable or Resilient? A Multi-Scale Assessment of Climate Impacts and Vulnerability in Norway

This paper explores the issue of climate vulnerability in Norway, an affluent country that is generally considered to be resilient to the impacts of climate change. In presenting a multi-scale assessment of climate change impacts and vulnerability in Norway, we show that the concept of vulnerability depends on the scale of analysis. Both exposure and the distribution of climate sensitive sectors vary greatly across scale. So do the underlying social and economic conditions that influence adaptive capacity. These findings question the common notion that climate change may be beneficial for Norway, and that the country can readily adapt to climate change. As scale differences are brought into consideration, vulnerability emerges within some regions, localities, and social groups. To cope with actual and potential changes in climate and climate variability, it will be necessary to acknowledge climate vulnerabilities at the regional and local levels, and to address them accordingly. This multi-scale assessment of impacts and vulnerability in Norway reinforces the importance of scale in global change research.     

Spalling Experiments on Large Hard Rock Specimens

Specimens of coarse-grained Äspö diorite were axially compressed to observe stress-induced spalling. The specimens had a novel design characterized by two manufactured large radius notches on opposite sides. The tangential stress occurring in the notches aimed to represent the tangential loading around a circular opening. Fracture stages were monitored by acoustic emission measurements. Rock chips were formed similar to those found in situ, which indicates a similar fracture process. Slabs were cut out from the specimens and impregnated using a fluorescent material to visualize the cracks. The cracks were subsequently examined by the naked eye and by means of microscopy images, from which fracture paths could be identified and related to different minerals and their crystallographic orientations. The microscopy analyses showed how the stress field and the microstructure interact. Parallel cracks were formed 2–4 mm below the surface, sub-parallel to the direction of the maximum principal stress. The crack initiation, the roles of minerals such as feldspar, biotite and quartz and their grain boundaries and crystallographic directions are thoroughly studied and discussed in this paper. Scale effects, which relate to the stress gradient and microstructure, are discussed.     

Bioassessment Techniques for Monitoring of Eutrophication and Nutrient Limitation in Coastal Ecosystems

Bioassesment by the use of the macroalga, Ulva lactuca L., was carried out in the Limfjord, Denmark, to assess the significance of nitrogen and phosphorus as limiting factors for primary production during 1985, 1993, 1994 and 1995 and for the detection of changes in eutrophication levels.

Minimum and critical tissue concentrations for nitrogen and phosphorus in macroalgae were identified. The concentrations of nitrogen were generally below the critical concentration level in June–October in 1985, 1993, and 1995 but in 1994 nitrogen was only limiting for primary production in short periods. Only in early spring in 1985 and 1993 were the tissue concentrations of phosphorus below the critical concentration level, whereas in 1994 up to 3–4 months showed phosphorus limited growth, indicating that significant changes in limitation patterns can occur between different years.

It was concluded that the use of biomonitoring techniques is well suited as a bioassessment method for direct detection and for providing a time-integrated measure of nutrient availability in coastal waters, and thus for assessing ecosystem health with regard to eutrophication. It is recommended that biomonitors and the concept of critical tissue concentrations should be used in environmental management and incorporated in future monitoring programmes.     

Co-management and the co-production of knowledge: Learning to adapt in Canada's Arctic

Co-management institutional arrangements have an important role in creating conditions for social learning and adaptation in a rapidly changing Arctic environment, although how that works in practice has not been clearly articulated. This paper draws on three co-management cases from the Canadian Arctic to examine the role of knowledge co-production as an institutional trigger or mechanism to enable learning and adapting. Experience with knowledge co-production across the three cases is variable but outcomes illustrate how co-management actors are learning to learn through uncertainty and environmental change, or learning to be adaptive. Policy implications of this analysis are highlighted and include the importance of a long-term commitment to institution building, an enabling policy environment to sustain difficult social processes associated with knowledge co-production, and the value of diverse modes of communication, deliberation and social interaction.     

Volatile retention from cometary impacts on the Moon

Impacts of comets and asteroids play an important role in volatile delivery on the Moon. We use a novel method for tracking vapor masses that reach escape velocity in hydrocode simulations of cometary impacts to explore the effects of volatile retention. We model impacts on the Moon to find the mass of vapor plume gravitationally trapped on the Moon as a function of impact velocity. We apply this result to the impactor velocity distribution and find that the total impactor mass retained on the Moon is approximately 6.5% of the impactor mass flux. Making reasonable assumptions about water content of comets and the comet size-frequency distribution, we derive a water flux for the Moon. After accounting for migration and stability of water ice at the poles, we estimate a total 1.3×10⁸-4.3×10⁹ metric tons of water is delivered to the Moon and remains stable at the poles over 1 Ga. A factor of 30 uncertainty in the estimated cometary impact flux is primarily responsible for this large range of values. The calculated mass of water is sufficient to account for the neutron fluxes poleward of 75° observed by Lunar Prospector. A similar analysis for water delivery to the Moon via asteroid impacts shows that asteroids provide six times more water mass via impacts than comets.