Dynamic evolution of nutrient discharge under stormflow and baseflow conditions in a coastal agricultural watershed in Ishigaki Island,Okinawa, Japan

Excessive terrestrial nutrient loadings adversely impact coral reefs by primarily enhancing growth of macroalgae, potentially leading to a phase‐shift phenomenon. Hydrological processes and other spatial and temporal factors affecting nutrient discharge must be examined to be able to formulate effective measures for reducing nutrient export to adjacent reefs. During storm events and baseflow periods, water samples were obtained from the tropical Todoroki River, which drains an intensively agricultural watershed into Shiraho coral reef. In situ nutrient analyzers were deployed for 6 months to hourly measure dissolved nutrient (NO₃⁻‐N and PO₄³⁻‐P) concentrations. Total phosphorus (TP) and suspended solid concentration (TSS) were increased by higher rainfall intensity (r = 0·94, p < 0·01) and river discharge Q (r = 0·88, p < 0·01). In contrast, NO₃⁻‐N concentration tends to decrease drastically (e.g. from 3 to 1 mg l⁻¹) during flood events. When base flow starts to dominate afterwards, NO₃⁻‐N manifested an increasing trend, but decreases when baseflow discharge becomes low. This counter‐clockwise hysteresis for NO₃⁻‐N highlights the significant influence of groundwater discharge. N delivery can therefore be considered a persistent process compared to sediment and P discharge, which are highly episodic in nature. Based on GIS analysis, nutrient concentration along the Todoroki River was largely affected by the percentage of sugarcane/bare areas and bedrock type. The spatial distribution of N concentration in the river reflects the considerable influence of subsurface geology—higher N levels in limestone‐dominated areas. P concentrations were directly related to the total length of artificial drainage, which enhances sediment transport. The use of high‐resolution monitoring data coupled with GIS‐based spatial analysis therefore enabled the clarification of control factors and the difference in the spatio‐temporal discharge characteristics between N and P. Thus, although erosion‐reduction schemes would reduce P discharge, other approaches (e.g. minimize fertilizer) are needed to reduce N discharge. Copyright © 2010 John Wiley & Sons, Ltd.     

Inverse analysis of deformation mechanism by geodetic surveys−a case study

In 1988 two large earthquakes with magnitude of Ms 7.6 and Ms 7.2 occurred in Lancang-Genma area, Southwest China. This paper discusses the determination of the spatial distribution of fault slip caused by the earthquakes using geodetic surveys. The prior information obtained from geological surveys and seismological investigations was used to determine the geometry of the fault plane and the average fault slip. The smooth constraints on the fault slips have been described by a normal distribution with hyperparameters, which are incorporated in the inversion analysis with a Bayesian model. Akaike’s Bayesian Information Criterion (ABIC) is used to get the optimal values of hyperparameters. Once the hyperparameters are determined, the maximum likelihood method is employed to estimate the patterns of a fault slip. Based on the results of inverse analysis monitoring geodetic surveys can be properly designed and conducted to obtain crust deformations and predict potential earthquake sources.     

Uranium co-precipitation with iron oxide minerals

In oxidizing environments, the toxic and radioactive element uranium (U) is most soluble and mobile in the hexavalent oxidation state. Sorption of U(VI) on Fe-oxides minerals (such as hematite [α-Fe₂O₃] and goethite [α-FeOOH]) and occlusion of U(VI) by Fe-oxide coatings are processes that can retard U transport in environments. In aged U-contaminated geologic materials, the transport and the biological availability of U toward reduction may be limited by coprecipitation with Fe-oxide minerals. These processes also affect the biological availability of U(VI) species toward reduction and precipitation as the less soluble U(IV) species by metal-reducing bacteria.To examine the dynamics of interactions between U(VI) and Fe oxides during crystallization, Fe-oxide phases (containing 0.5 to 5.4 mol% U/(U + Fe)) were synthesized by means of solutions of U(VI) and Fe(III). Wet chemical (digestions and chemical extractions) and spectroscopic techniques were used to characterize the synthesized Fe oxide coprecipitates after rinsing in deionized water. Leaching the high mol% U solids with concentrated carbonate solution (for sorbed and solid-phase U(VI) species) typically removed most of the U, leaving, on average, about 0.6 mol% U. Oxalate leaching of solids with low mol% U contents (about 1 mol% U or less) indicated that almost all of the Fe in these solids was crystalline and that most of the U was associated with these crystalline Fe oxides. X-ray diffraction and Fourier-transform infrared (FT-IR) spectroscopic studies indicate that hematite formation is preferred over that of goethite when the amount of U in the Fe-oxides exceeds 1 mol% U (∼4 wt% U). FT-IR and room temperature continuous wave luminescence spectroscopic studies with unleached U/Fe solids indicate a relationship between the mol% U in the Fe oxide and the intensity or existence of the spectra features that can be assigned to UO₂²⁺ species (such as the IR asymmetric υ₃ stretch for O = U = O for uranyl). These spectral features were undetectable in carbonate- or oxalate-leached solids, suggesting solid phase and sorbed U(VI)O₂²⁺ species are extracted by the leach solutions. Uranium L₃-edge x-ray absorption spectroscopic (XAFS) analyses of the unleached U-Fe oxide solids with less than 1 mol% U reveal that U(VI) exists with four O atoms at radial distances of 2.19 and 2.36 Å and second shell Fe at a radial distance at 3.19 Å.Because of the large ionic radius of UO₂²⁺ (∼1.8 Å) relative to that of Fe³⁺ (0.65 Å), the UO₂²⁺ ion is unlikely to be incorporated in the place of Fe in Fe(III)-oxide structures. Solid-phase U(VI) can exist as the uranyl [U(VI)O₂²⁺] species with two axial U-O double bonds and four or more equatorial U-O bonds or as the uranate species (such as γ-UO₃) without axial U-O bonds. Our findings indicate U⁶⁺ (with ionic radii of 0.72 to 0.8 Å, depending on the coordination environment) is incorporated in the Fe oxides as uranate (without axial O atoms) until a point of saturation is reached. Beyond this excess in U concentration, precipitating U(VI) forms discrete crystalline uranyl phases that resemble the uranyl oxide hydrate schoepite [UO₂(OH)₂·2H₂O]. Molecular modeling studies reveal that U⁶⁺ species could bond with O atoms from distorted Fe octahedra in the hematite structure with an environment that is consistent with the results of the XAFS. The results provide compelling evidence of U incorporation within the hematite structure.     

From source terrains of the Eastern Alps to the Molasse Basin: Detrital record of non-steady-state exhumation

Fission-track cooling ages of detrital apatite (AFT) in the East Alpine Molasse Basin display age groups corresponding to geodynamic events in the orogen since Jurassic times. These age groups are typical of certain thermotectonic units, which formed a patchwork in the Swiss and Eastern Alps. By a combination of petrographic and thermochronologic data, progressive erosion of source terrains is monitored in different catchments since the Oligocene. The AFT cooling ages show a decrease in lag time until when rapidly cooled debris derived from tectonically exhumed core complexes became exposed. After termination of tectonic exhumation, lag times of debris derived from the core complexes increased. Neither on the scale of the entire Eastern Alps, or on the scale of individual catchments, steady-state exhumation is observed, due to the highly dynamic changes of exhumation rates since Late Eocene collision.     

Structural Analysis of the Coal-Bearing Kleidi Basin: Insights in Kinematics of the Broader Ptolemais Sedimentary Basin (Western Macedonia,Greece)

Geotectonics - This study processes borehole data from the coal-bearing Kleidi basin (Ptolemais sedimentary basin, Western Macedonia, Greece) to unravel the timeline of the neotectonic...     

VELOCITY–DISCHARGE RELATIONSHIPS DERIVED FROM DYE TRACER EXPERIMENTS IN GLACIAL MELTWATERS: IMPLICATIONS FOR SUBGLACIAL FLOW CONDITIONS

Repeated dye tracer tests were undertaken from individual moulins at Haut Glacier d'Arolla, Switzerland, over a number of diurnal discharge cycles during the summers of 1989–1991. It was hoped to use the concepts of at-a-station hydraulic geometry to infer flow conditions in subglacial channels from the form of the velocity–discharge relationships derived from these tests. The results, however, displayed both clockwise and anticlockwise velocity–discharge hysteresis, in addition to the simple power function relationship assumed in the hydraulic geometry approach. Clockwise hysteresis seems to indicate that a moulin drains into a small tributary channel rather than directly into an arterial channel, and that discharges in the two channels vary out of phase with each other. Anticlockwise hysteresis is accompanied by strong diurnal variations in the value of dispersivity derived from the dye breakthrough curve, and is best explained by hydraulic damming of moulins or sub/englacial passageways. Despite the complex velocity–discharge relationships observed, some indication of subglacial flow conditions may be obtained if tributary channels comprise only a small fraction of the drainage path and power function velocity–discharge relationships are derived from dye injections conducted during periods when the supraglacial discharge entering the moulin and the bulk discharge vary in phase. Analyses based on this premise suggest that both open and closed channel flow occur beneath Haut Glacier d'Arolla, and that flow conditions are highly variable at and between sites.     

Pollution monitoring with meiofauna,using the ratio of nematodes to copepods

The ratio of nematodes to copepods was calculated for meiofauna samples from 17 beaches and additional values for intertidal and sublittoral sites were obtained from the literature. Intertidal ratios increased with decreasing particle size, but ratios from polluted sites were always extremely high. Sublittoral ratios increased with depth. It is suggested that this ratio has potential for monitoring organic pollution of sandy beaches.     

Oxygen isotopic constraints on the origin and parent bodies of eucrites, diogenites, and howardites

A few eucrites have anomalous oxygen isotopic compositions. To help understand their origin and identify additional samples, we have analyzed the oxygen isotopic compositions of 18 eucrites and four diogenites. Except for five eucrites, these meteorites have Δ¹⁷O values that lie within 2σ of their mean value viz., −0.242 ± 0.016‰, consistent with igneous isotopic homogenization of Vesta. The five exceptional eucrites—NWA 1240, Pasamonte (both clast and matrix samples), PCA 91007, A-881394, and Ibitira—have Δ¹⁷O values that lie, respectively, 4σ, 5σ, 5σ, 15σ, and 21σ away from this mean value. NWA 1240 has a δ¹⁸O value that is 5σ below the mean eucrite value. Four of the five outliers are unbrecciated and unshocked basaltic eucrites, like NWA 011, the first eucrite found to have an anomalous oxygen isotopic composition. The fifth outlier, Pasamonte, is composed almost entirely of unequilibrated basaltic clasts. Published chemical data for the six eucrites with anomalous oxygen isotopic compositions (including NWA 011) exclude contamination by chondritic projectiles as a source of the oxygen anomalies. Only NWA 011 has an anomalous Fe/Mn ratio, but several anomalous eucrites have exceptional Na, Ti, or Cr concentrations. We infer that the six anomalous eucrites are probably derived from five distinct Vesta-like parent bodies (Pasamonte and PCA 91007 could come from one body). These anomalous eucrites, like the isotopically normal, unbrecciated eucrites with 4.48 Gyr Ar-Ar ages, are probably deficient in brecciation and shock effects because they were sequestered in small asteroids (10 km diameter) during the Late Heavy Bombardment following ejection from Vesta-like bodies. The preservation of Vesta’s crust and the lack of deeply buried samples from the hypothesized Vesta-like bodies are consistent with the removal of these bodies from the asteroid belt by gravitational perturbations from planets and protoplanets, rather than by collisional grinding.     

A reported early-man site adjacent to southern Alaska's continental shelf: A geologic solution to an archeologic enigma

An extensive ancient archeologic site containing lithic artifacts and associated with mammoth remains was reported at Chinitna Bay, southern Alaska in 1943. The presence of such a site adjacent to the continental shelf at the base of the rugged Aleutian Range suggested that humans may have inhabited the inner shelf environment during the late Pleistocene at times of lowered sea level. Because of the site's potential significance, an interdisciplinary research team relocated and reinvestigated the area in 1978, but failed to find evidence of prehistoric human habitation. Geologic studies and radiocarbon dating indicate that the strata reported at the site are intertidal in origin, very late Holocene in age, and have undergone significant tectonic movement in the recent past. These observations indicate that the previously published observations of the Chinitna Bay site are probably invalid.     

Renovation of a failed constructed wetland treating acid mine drainage

 Acid mine drainage (AMD) from abandoned underground mines significantly impairs water quality in the Jones Branch watershed in McCreary Co., Kentucky, USA. A 1022-m² surface-flow wetland was constructed in 1989 to reduce the AMD effects, however, the system failed after six months due to insufficient utilization of the treatment area, inadequate alkalinity production and metal overloading. In an attempt to improve treatment efficiencies, a renovation project was designed incorporating two anoxic limestone drains (ALDs) and a series of anaerobic subsurface drains that promote vertical flow of mine water through a successive alkalinity producing system (SAPS) of limestone beds overlain by organic compost. Analytical results from the 19-month post-renovation period are very encouraging. Mean iron concentrations have decreased from 787 to 39 mg l^–1, pH increased from 3.38 to 6.46 and acidity has been reduced from 2244 to 199 mg l^–1 (CaCO₃ equivalent). Mass removal rates averaged 98% for Al, 95% for Fe, 94% for acidity, 55% for sulfate and 49% for Mn during the study period. The results indicate that increased alkalinity production from limestone dissolution and longer residence time have contributed to sufficient buffering and metal retention. The combination of ALDs and SAPS technologies used in the renovation and the sequence in which they were implemented within the wetland system proved to be an adequate and very promising design for the treatment of this and other sources of high metal load AMD. Received: 29 June 1998 · Accepted: 15 September 1998