Simultaneous use of cable and collar to prevent local scouring around bridge pier

Various methods to control scour around bridge piers have been proposed.In the present study the application of cable or collar and a combination of cable and collar were examined experimentally,as countermeasures against local scouring at a smooth circular bridge pier,close to threshold flow conditions of initiation of uniform sediment motion.The results show that the simultaneous use of cable and collar has high efficiency in reducing the scour depth.The best configuration was found for a cable-pier diameter ratio of 0.15 and thread angle of 15°,in which the scour depth in upstream of the pier reduced to about 53%.In the case of a pier protected with cable and collar the scouring postponed more than pier protected with collar and the rate of scouring is less than in pier protected with collar.These advantages can reduce the risk of pier failure when the duration of flood is short. The results indicate that the scour reduction increases as the cable diameter increased and the thread angle decreased.     

Developing an overall assessment map for flood hazard on large area watershed using multi-method approach: case study of Wadi Qena watershed,Egypt

Natural Hazards - Many parts of Upper Egypt as Sinai and Red Sea areas were hit by severe flash floods since 1976. Wadi Qena is considered one of the most watersheds that suffers from floods in Red...     

Reduction of local scour around bridge pier groups using collars

In this paper reduction of scour around group of two and three piers using circular collar has been carried out for the case of clear-water flow over uniform sediment. The efficiency of collars, with different sizes and spaces between piers is studied through experiments in group of two and three piers. The result reveals that collar has more influence in reduction of scour depth in rear piers than the first pier. Also, when the spacing between the piers increases the area without protection between the piers is washed away resulting deeper scour holes at the rear piers.     

Distribution of fluoride in groundwater of Maku area, northwest of Iran

High fluoride groundwater occurs in Maku area, in the north of West Azarbaijan province, northwest of Iran. Groundwater is the main source of drinking water for the area residents. Groundwater samples were collected from 72 selected points including 40 basaltic and 32 nonbasaltic springs and wells, in two stages, during June and August 2006. The areas with high fluoride concentrations have been identified, and the possible causes for its variation have been investigated. Regional hydrogeochemical investigation indicates that water-rock interaction is probably the main reason for the high concentration of ions in groundwater. The concentration of F⁻ in groundwater is positively correlated with that of HCO₃ ⁻ and Na⁺, indicating that groundwater with high HCO₃ ⁻ and Na⁺ concentrations help to dissolve some fluoride-rich minerals. All of the water samples, collected from the basaltic areas do not meet the water quality standards for fluoride concentration and some other parameters. Hence, it is not suitable for consumption without any prior treatment. Inhabitants of the area that obtain their drinking water supplies from basaltic springs and wells are suffering from dental fluorosis. The population of the study area is at a high risk due to excessive fluoride intake especially when they are unaware of the amount of fluoride being ingested due to lack of awareness.     

Microfacies and geochemistry of the Ilam Formation in the Tang-E Rashid area, Izeh, S.W. Iran

The Ilam Formation (Santonian–Campanian in age), part of the Bangestan Group, is disconformably overlain by the Sarvak Formation and underlain by the Gurpi Formation in the Tang-E Rashid, Peyon area, Izeh (Zagros), southwest of Iran.Facies analyses indicate that the Ilam carbonates formed in four microfacies belts: tidal flat, lagoon, shoal and open marine, in a platform ramp environment. Major and minor elements and carbon and oxygen isotope values were used to determine the original carbonate mineralogy of the Ilam Formation. Petrographic evidence and elemental and oxygen and carbon isotope values indicate that aragonite was the original carbonate mineralogy in the Ilam Formation. The elemental and isotopic compositions of the Ilam carbonates also illustrate that they have stabilized in the marine phreatic environment. Variations of Sr/Ca and δ¹⁸O values versus Mn suggest that diagenetic alteration occurred in a closed system. Temperature calculation based on the oxygen isotope value of the least-altered sample indicates that the very early shallow burial fluid temperature was around 28 °C.Recognition of the exact boundary between the Ilam and Sarvak Formations is difficult, due to similar lithologies and the absence of the Surgah Formation in the study area. However, elemental and oxygen and carbon isotope analysis were used to determine the boundary between these formations. The δ¹⁸O and δ¹³C values, along with elemental results, clearly indicate a subaerial exposure surface, below which meteoric diagenesis affected the sediments.     

Assessment of climate change impacts on rainfall using large scale climate variables and downscaling models – A case study

Many of the applied techniques in water resources management can be directly or indirectly influenced by hydro-climatology predictions. In recent decades, utilizing the large scale climate variables as predictors of hydrological phenomena and downscaling numerical weather ensemble forecasts has revolutionized the long-lead predictions. In this study, two types of rainfall prediction models are developed to predict the rainfall of the Zayandehrood dam basin located in the central part of Iran. The first seasonal model is based on large scale climate signals data around the world. In order to determine the inputs of the seasonal rainfall prediction model, the correlation coefficient analysis and the new Gamma Test (GT) method are utilized. Comparison of modelling results shows that the Gamma test method improves the Nash–Sutcliffe efficiency coefficient of modelling performance as 8% and 10% for dry and wet seasons, respectively. In this study, Support Vector Machine (SVM) model for predicting rainfall in the region has been used and its results are compared with the benchmark models such as K-nearest neighbours (KNN) and Artificial Neural Network (ANN). The results show better performance of the SVM model at testing stage. In the second model, statistical downscaling model (SDSM) as a popular downscaling tool has been used. In this model, using the outputs from GCM, the rainfall of Zayandehrood dam is projected under two climate change scenarios. Most effective variables have been identified among 26 predictor variables. Comparison of the results of the two models shows that the developed SVM model has lesser errors in monthly rainfall estimation. The results show that the rainfall in the future wet periods are more than historical values and it is lower than historical values in the dry periods. The highest monthly uncertainty of future rainfall occurs in March and the lowest in July.     

Carbamazepine Removal from Groundwater: Effectiveness of the TiO2/UV,Nanoparticulate Zero‐Valent Iron,and Fenton (NZVI/H2O2) Processes

Pharmaceutical compounds, widely produced and used all around the world, are partly responsible for the widespread water pollution in the environment. Carbamazepine (CBZ) is an antiepileptic drug that persists in the environment for many years. In the present study, we used the TiO₂/UV, nanoparticulate zero‐valent iron (NZVI), and NZVI/H₂O₂ treatment processes to compare efficiency of CBZ removal from water. Influence of NZVI loading, H₂O₂ concentration, TiO₂ loading, UV lamp power, and the matrix (distilled water and groundwater) on CBZ removal efficiency was evaluated using full factorial design. Results indicated that the NZVI/H₂O₂ process oxidized CBZ within 5 min. On the other hand, the NZVI process alone did not reduce CBZ concentration after 120 min of process time. The NZVI/H₂O₂ process was equally effective in CBZ removal from both distilled water and groundwater whereas the TiO₂/UV process was less effective due to the presence of ions in groundwater. CBZ removal efficiency of the TiO₂/UV process declined 30% when the matrix was changed from distilled water to groundwater. Negative divalent ions, i.e., and , were the main cause of reduction of CBZ removal efficiency from groundwater. It is likely that these two ions adsorb onto, and consequently prevent the superoxide anion and hydroxyl radical OH^? from being generated on, the surface of the TiO₂.     

New constraints on lithospheric thickness of the Iranian plateau using converted waves

The study of mantle lithosphere plays a key role to reveal predominant tectonic setting process of a region. The current geological and tectonic setting of Iran is due to the ongoing continental–continental collision of the Arabian and Eurasian plates. We applied a combined P and S receiver function analysis to the teleseismic data of nine permanent broadband seismic stations of the International Institute of Earthquake Engineering and Seismology located in different tectonic zones of Iranian plateau. More than 4 years of data were used to estimate the thickness of the crust and mantle lithosphere. According to our results, the crust is 50 km thick beneath the Zagros fold and thrust belt (ZFTB). We found the maximum Moho depth of approximately 70 km under the Sanandaj-Sirjan zone (SSZ) indicating the overthrusting of the crust of Central Iran onto the Zagros crust along the main Zagros thrust (MZT). Below the northeasternmost part of the Urumieh–Dokhtar Magmatic Arc (UDMA) and Central Iran, the Moho becomes shallower and lies at 40 km depth. Towards northeast, beneath the Alborz zone, the crust is 55 km thick. Based on S receiver functions, we provided new insights into the thickness of the Arabian and Eurasian lithospheres. The location of the boundary between these plates was estimated to be beneath the SSZ, which is slightly shifted northeastward relative to the surficial expression of the MZT. Furthermore, the Arabian plate is characterized by the relatively thick lithosphere of about 130 km beneath the ZFTB reaching 150 km beneath the SSZ, where the thickest crust was also observed. This may imply that the shortening across the Zagros is accommodated by lithospheric thickening. In contrast, UDMA and Central Iran are recognized by the thin lithosphere of about 80–85 km. This thin lithosphere may be associated with the asthenospheric upwelling caused by either lithospheric delamination or Neo-Tethys slab detachment beneath the Zagros collision zone.     

Effects of accelerating and decelerating flows in a channel with vegetated banks and gravel bed

Experiments were conducted in an 8 m long,40 cm wide,and 60 cm deep re-circulating fiume with vegetated banks and gravel bed to study the effects of accelerating and decelerating flows on the flow stru...