Effects of basin activities and land use on water quality trends in Tahtali Basin, Turkey

Bi-weekly water quality data from seven monitoring stations located within Tahtali Watershed, ?zmir, Turkey and digital land use/land cover data of the same watershed are analyzed in this study. To examine the changes in land use associated with urbanization, the satellite images of the main pool of the Tahtali reservoir prior to filling and subsequent to filling, respectively, are analyzed. Aerial photos of the basin taken in 1995 (October) are compared with images taken in 2005 (November) from the IKONOS satellite through use of several GIS techniques. New residential buildings, greenhouses, and industrial buildings are presented in separate layers, and changes in basin activities are quantified. The effects of urbanization on the water quality are investigated through statistical analysis. The seasonal Kendall test is applied to the water quality parameters monitored bi-weekly at seven stations within the basin for the duration 1997–2005. There was no trend in phosphorus, but there was a negative trend in boron and nitrate and a positive trend in the parameters of biological oxygen demand (BOD) and chemical oxygen demand (COD). The improvement in nitrate concentrations is attributed to the new regulations on the use of fertilizers in greenhouses. However, increase of BOD and COD concentrations is related to the growing settlement areas and industrial zones, which point to the insufficient wastewater treatment within the basin. Soil erosion within the basin is also quantified by the universal soil loss equation using available maps. Estimated total soil loss rate increased about 2.5 times that of 1995 when the changed land use composition in 2005 is considered in the calculations.     

Mixed estimation methods for Halphen distributions with applications in extreme hydrologic events

The Halphen family of distributions is a flexible and complete system to fit sets of observations independent and identically distributed. Recently, it is shown that this family of distributions represents a potential alternative to the generalized extreme value distributions to model extreme hydrological events. The existence of jointly sufficient statistics for parameter estimation leads to optimality of the method of maximum likelihood (ML). Nevertheless, the ML method requires numerical approximations leading to less accurate values. However, estimators by the method of moments (MM) are explicit and their computation is fast. Even though MM method leads to good results, it is not optimal. In order to combine the advantages of the ML (optimality) and MM (efficiency and fast computations), two new mixed methods were proposed in this paper. One of the two methods is direct and the other is iterative, denoted respectively direct mixed method (MMD) and iterative mixed method (MMI). An overall comparison of the four estimation methods (MM, ML, MMD and MMI) was performed using Monte Carlo simulations regarding the three Halphen distributions. Generally, the MMI method can be considered for the three Halphen distributions since it is recommended for a majority of cases encountered in hydrology. The principal idea of the mixed methods MMD and MMI could be generalized for other distributions with complicated density functions.     

Beach accretion and erosion, Burullus-Gamasa coast, Egypt

Several areas of erosion and accretion were observed along the Burullus-Gamasa beach. The accreted sands are coarser and less sorted than the eroded ones. Differentiation between them could be achieved on the basis of their grain-size fractions, shape of grain-size distribution curves and statistical grain-size parameter relationships.     

Centrifuge modelling of reverse fault–foundation interaction

The propagation of reverse faults through soil to the ground surface has been observed to cause damage to surface infrastructure. However, the interaction between a fault propagating through a sand layer and a shallow foundation can be beneficial for heavily loaded foundations by causing deviation of the fault away from the foundation. This was studied in a series of centrifuge model tests in which reverse faults of dip angle 60° (at bedrock level) were initiated through a sand layer, close to shallow foundations. The tests revealed subtle interaction between the fault and the shallow foundation so that the foundation and soil response depend on the foundation loading, position, breadth and flexibility. Heavily loaded rigid foundations appeared best able to deviate fault rupture away from the foundation but this deviation could be associated with significant foundation rotations. However, a lightly loaded foundation was unable to deviate a reverse fault and the fault emerged beneath the foundation. This led to gapping beneath the foundation as well as significant rotations and may cause severe structural distress. As well as providing insight into the mechanisms of behaviour, the data from the tests is used to validate finite element analyses in a separate article.     

Structure de socle,sismostratigraphie et héritage structural au cours du rifting au niveau de la marge d'Ifni/Tan-Tan (Maroc sud-occidental)

Seismic reflection profiles from the Ifni/Tan-Tan Atlantic margin of southern Morocco, interpreted in the light of well data and field geology from the Western Anti-Atlas, allowed us to establish the seismostratigraphic framework of the syn-rift series and to reveal (i) a compressional structural style in the pre-Triassic basement similar to that established in the adjacent outcropping onshore basement but with an opposed western vergence, (ii) the importance of inherited anterior structures in the formation of Triassic-Liassic rift structures and (iii) an east–west propagation of these rift structures. To cite this article: N. AbouAli et al., C. R. Geoscience 337 (2005).     

Threshold of motion of bivalve and gastropod shells under oscillatory flow in flume experiments

The threshold of motion of non-fragmented mollusc shells was studied for the first time under oscillatory flow. In this regard, flume experiments were used to investigate the threshold of motion of three bivalve and three gastropod species, two typical mollusc classes of coastal coquina deposits. The sieve diameters ranged from 2·0 to 15·9 mm. These experiments were performed on a flat-bottom setup under regular non-breaking waves (swell) produced by a flap-type wave generator. The critical Shields values for each species of mollusc were plotted against the sieve and nominal diameter. Moreover, the dimensionless Corey shape factor of the shells was evaluated in order to investigate the effect of mollusc shell shapes on the threshold of motion. According to their critical Shields parameter, the mollusc threshold data under oscillatory flow present smaller values than the siliciclastic sediments when considering their sieve diameter. In addition, the mollusc datasets are below the empirical curves built from siliciclastic grain data under current and waves. When considering the nominal diameter, the critical Shields parameter increases and the mollusc data are closer to siliciclastic sediments. Bivalves, which have a flat-concave shape (form factor: 0·27 to 0·37), have a higher critical Shields parameter for smaller particles and more uniform datasets than the gastropod scattered data, which have a rounded shape (form factor: 0·58 to 0·62) and have varied morphologies (ellipsoidal, conical and cubic). The comparison between previous current-driven threshold data of bioclastic sediment motion and the data of mollusc whole shells under oscillatory flow shows a fair correlation on the Shields diagram, in which all datasets are below the mean empirical curves for siliciclastic sediments. These findings indicate that the shape effect on the transport initiation is predominant for smaller shells. The use of the nominal diameter is satisfactory to improve the bioclastic and siliciclastic data correlation.     

Geological and geophysical studies of the Agoudal impact structure (Central High Atlas,Morocco): New evidence for crater size and age

Since the discovery of shatter cones (SCs) near the village of Agoudal (Morocco, Central High Atlas Mountains) in 2013, the absence of one or several associated circular structures led to speculation about the age of the impact event, the number, and the size of the impact crater or craters. Additional constraints on the crater size, age, and erosion rates are obtained here from geological, structural, and geophysical mapping and from cosmogenic nuclide data. Our geological maps of the Agoudal impact site at the scales of 1:30,000 (6 km²) and 1:15,000 (2.25 km²) include all known occurrences of SCs in target rocks, breccias, and vertical to overturned strata. Considering that strata surrounding the impact site are subhorizontal, we argue that disturbed strata are related to the impact event. Three types of breccias have been observed. Two of them (br1‐2 and br2) could be produced by erosion–sedimentation–consolidation processes, with no evidence for impact breccias, while breccia (br1) might be impact related. The most probable center of the structure is estimated at 31°59′13.73?N, 5°30′55.14?W using the concentric deviation method applied to the orientation of strata over the disturbed area. Despite the absence of a morphological expression, the ground magnetic and electromagnetic surveys reveal anomalies spatially associated with disturbed strata and SC occurrences. The geophysical data, the structural observations, and the area of occurrence of SCs in target rocks are all consistent with an original size of 1.4–4.2 km in diameter. Cosmogenic nuclide data (³⁶Cl) constrain the local erosion rates between 220 ± 22 m Ma^?1 and 430 ± 43 m Ma^?1. These erosion rates may remove the topographic expression of such a crater and its ejecta in a time period of about 0.3–1.9 Ma. This age is older than the Agoudal iron meteorite age (105 ± 40 kyr). This new age constraint excludes the possibility of a genetic relationship between the Agoudal iron meteorite fall and the formation of the Agoudal impact site. A chronolgy chart including the Atlas orogeny, the alternation of sedimentation and erosion periods, and the meteoritic impacts is presented based on all obtained and combined data.     

Radiation transfer in inhomogeneous dispersive media

Equations for the angular density of radiation, reflected and transmitted intensities associated with radiation scattered by inhomogeneous dispersive media are obtained. The Padé approximant technique is used to calculate these intensities in inhomogeneous and homogeneous media. The results for the [0/1] Padé approximant lead to numerical results that compared with the exact results.