Occurrence of a regular C25 isoprenoid hydrocarbon in tertiary sediments representing a lagoonal-type,saline environment

A regular C₂₅ isoprenoid alkane (2,6,10,14,18-pentamethyleicosane) has been isolated from highly saline Tertiary sediments. The isolation utilized elution chromatography, urea adduction and gas chromatography; identification was based on the mass spectrum. This C₂₅ isoprenoid may represent a biological marker, possibly typical for a lagoonal-type, saline environment.     

Irregular Satellites of Jupiter: a study of the capture direction

The irregular satellites of Jupiter are believed to be captured asteroids or planetesimals. In the present work is studied the direction of capture of these objects as a function of their orbital inclination. We performed numerical simulations of the restricted three-body problem, Sun-Jupiter-particle, taking into account the growth of Jupiter. The integration was made backward in time. Initially, the particles have orbits as satellites of Jupiter, which has its present mass. Then, the system evolved with Jupiter losing mass and the satellites escaping from the planet. The reverse of the escape direction corresponds to the capture direction. The results show that the Lagrangian points L1 and L2 mainly guide the direction of capture. Prograde satellites are captured through these two gates with very narrow amplitude angles. In the case of retrograde satellites, these two gates are wider. The capture region increases as the orbital inclination increases. In the case of planar retrograde satellites the directions of capture cover the whole 360° around Jupiter. We also verified that prograde satellites are captured earlier in actual time than retrograde ones. This paper was presented at the Asteriods, Comets and Meteors meeting held at Búzios, Rio de Janeiro, Brazil in August 2005 and could not be included in the special issue related to that conference.     

Streambank dewatering for increased stability

Streambank erosion is often the dominant source of sediment leaving modified watersheds. Mass failure of high, steep banks is one of the most serious forms of streambank erosion. The risk of a given bank experiencing mass failure is a function of bank height, angle, and soil strength, which is governed by soil moisture. Two methods for bank dewatering were tested in adjacent sections of streambank bordering a deeply incised channel in northern Mississippi: a low‐cost pump system and subsurface horizontal drains. Pore water pressures (both positive and negative pressures, or matric suction) were continuously monitored for 2 years at the pumped site, at an adjacent untreated control section, and for 1 year at the site stabilized with horizontal drains. Resulting data were used to calculate a time series of the factor of safety using a computer model. Over the course of two wet seasons, average bank retreats for the control and pumped plots were 0·43 and 0·21 m, respectively. More limited monitoring revealed that the site with passive drains retreated about 0·23 m. At the pumped site pore water pressure was 3–4 kPa lower than at the control site during the most critical periods. Accordingly, computed factors of safety were above the failure threshold at the pumped site, but fell below unity at the control site on 11 occasions over the period of observation. Similarly, the drained site displayed generally lower pore water pressure and higher safety factors except for two events when drains were evidently overwhelmed with the volume of local surface and subsurface flows. These results suggest, but do not prove, that bank dewatering promoted lower rates of bank retreat and higher levels of stability since the three sites had slight differences in soils, geometry and boundary conditions. Initial cost of the dewatering treatments were significantly less than orthodox bank stabilization measures, but operation and maintenance requirements may be greater. Published in 2009 by John Wiley & Sons, Ltd.     

Conceptual framework for assessing the response of delta channel networks to Holocene sea level rise

Recent research has identified two fundamental unit processes that build delta distributary channels. The first is mouth-bar deposition at the shoreline and subsequent channel bifurcation, which is driven by progradation of the shoreline; the second is avulsion to a new channel, a result of aggradation of the delta topset. The former creates relatively small, branching networks such as Wax Lake Delta; the latter generates relatively few, long distributaries such as the Mississippi and Atchafalaya channels on the Mississippi Delta. The relative rate of progradation to aggradation, and hence the creation of accommodation space, emerges as a controlling parameter on channel network form. Field and experimental research has identified sea level as the dominant control on Holocene delta growth worldwide, and has empirically linked channel network changes to changes in the rate of sea level rise. Here I outline a simple modeling framework for distributary network evolution, and use this to explore large-scale changes in Holocene channel pattern that have been observed in deltas such as the Rhine-Meuse and Mississippi. Rapid early- to mid-Holocene sea level rise forced many deltas into an aggradational mode, where I hypothesize that avulsion and the generation of large-scale branches should dominate. Slowing of sea level rise in the last ～6000 yr allowed partitioning of sediment into progradation, facilitating the growth of smaller-scale distributary trees at the shorelines of some deltas, and a reduction in the number of large-scale branches. Significant antecedent topography modulates delta response; the filling of large incised valleys, for example, caused many deltas to bypass the aggradational phase. Human effects on deltas can be cast in terms of geologic controls affecting accommodation: constriction of channels forces rapid local progradation and mouth-bar bifurcation, while accelerated sea level rise increases aggradation and induces more frequent channel avulsion.     

Petrology and oxygen isotopic compositions of clasts in HED polymict breccia NWA 5232

Northwest Africa (NWA) 5232, an 18.5 kg polymict eucrite, comprises eucritic and exogenic CM carbonaceous chondrite clasts within a clastic matrix. Basaltic clasts are the most abundant eucritic clast type and show a range of textures and grain size, from subophitic to granoblastic. Other eucritic clast types present include cumulate (high‐En pyroxene), pyroxene‐lath, olivine rich with symplectite intergrowths as a break‐down product of a quickly cooled Fe‐rich metastable pyroxferroite, and breccia (fragments of a previously consolidated breccia) clasts. A variable cooling rate and degree of thermal metamorphism, followed by a complex brecciation history, can be inferred for the clasts based on clast rounding, crystallization (and recrystallization) textures, pyroxene major and minor element compositions, and pyroxene exsolution. The range in δ¹⁸O of clasts and matrix of NWA 5232 reflects its origin as a breccia of mixed clasts dominated by eucritic lithologies. The oxygen isotopic compositions of the carbonaceous chondrite clasts identify them as belonging to CM group and indicate that these clasts experienced a low degree of aqueous alteration while part of their parent body. The complex evolutionary history of NWA 5232 implies that large‐scale impact excavation and mixing was an active process on the surface of the HED parent body, likely 4 Vesta.     

Fundamental physics and absolute positioning metrology with the MAGIA lunar orbiter

MAGIA is a mission approved by the Italian Space Agency (ASI) for Phase A study. Using a single large-diameter laser retroreflector, a large laser retroreflector array and an atomic clock onboard MAGIA we propose to perform several fundamental physics and absolute positioning metrology experiments: VESPUCCI, an improved test of the gravitational redshift in the Earth?CMoon system predicted by General Relativity; MoonLIGHT-P, a precursor test of a second generation Lunar Laser Ranging (LLR) payload for precision gravity and lunar science measurements under development for NASA, ASI and robotic missions of the proposed International Lunar Network (ILN); Selenocenter (the center of mass of the Moon), the determination of the position of the Moon center of mass with respect to the International Terrestrial Reference Frame/System (ITRF/ITRS); this will be compared to the one from Apollo and Lunokhod retroreflectors on the surface; MapRef, the absolute referencing of MAGIA??s lunar altimetry, gravity and geochemical maps with respect to the ITRF/ITRS. The absolute positioning of MAGIA will be achieved thanks to: (1) the laboratory characterization of the retroreflector performance at INFN-LNF; (2) the precision tracking by the International Laser Ranging Service (ILRS), which gives two fundamental contributions to the ITRF/ITRS, i.e. the metrological definition of the geocenter (the Earth center of mass) and of the scale of length; (3) the radio science and accelerometer payloads; (4) support by the ASI Space Geodesy Center in Matera, Italy. Future ILN geodetic nodes equipped with MoonLIGHT and the Apollo/Lunokhod retroreflectors will become the first realization of the International Moon Reference Frame (IMRF), the lunar analog of the ITRF.     

An instrument for commissioning the active and adaptive optics of modern telescopes: the Infrared Test Camera for the Large Binocular Telescope

We describe the design, integration, and operation of the infrared test cameras for the commissioning of the Large Binocular Telescope. The design and construction phase lasted slightly more than one year from February 2007 to April 2008 and was the result of a joint collaboration among INAF Osservatorio Astronomico di Bologna, Università di Bologna Dipartimento di Astronomia (Italy) and the Max-Planck-Institut für Astronomie (Heidelberg, Germany). Thereafter, the camera was delivered to the LBT Observatory (USA) for commissioning of the telescope active optics and, more recently, for commissioning of the first light adaptive optics.     

Electron Temperatures and Flow Speeds of the Low Solar Corona: MACS Results from the Total Solar Eclipse of 29 March 2006 in Libya

An experiment was conducted in conjunction with the total solar eclipse on 29 March 2006 in Libya to measure both the electron temperature and its flow speed simultaneously at multiple locations in the low solar corona by measuring the visible K-coronal spectrum. Coronal model spectra incorporating the effects of electron temperature and its flow speed were matched with the measured K-coronal spectra to interpret the observations. Results show electron temperatures of (1.10±0.05) MK, (0.70±0.08) MK, and (0.98±0.12) MK, at 1.1 R _⊙ from Sun center in the solar north, east and west, respectively, and (0.93±0.12) MK, at 1.2 R _⊙ from Sun center in the solar west. The corresponding outflow speeds obtained from the spectral fit are (103±92) km s⁻¹, (0+10) km s⁻¹, (0+10) km s⁻¹, and (0+10) km s⁻¹. Since the observations were taken only at 1.1 R _⊙ and 1.2 R _⊙ from Sun center, these speeds, consistent with zero outflow, are in agreement with expectations and provide additional confirmation that the spectral fitting method is working. The electron temperature at 1.1 R _⊙ from Sun center is larger at the north (polar region) than the east and west (equatorial region).