Analysis of the Effect of Borehole Size on Explosive Energy Loss in Rock Blasting

In this paper, studies were conducted on the effect of borehole size on explosive energy loss in rock blasting. Since most industrial explosives are nonideal ones, the charge size and the confinement condition have significant impact on the detonation performance of these explosives. Analyses indicated that smaller boreholes will cause more loss of explosive energy than larger ones. This is especially true for most industrial explosives. The paper presents the analyses of energy loss for a number of different explosives with various borehole sizes. Based on these analyses recommendations and guidelines were given for borehole size determination in rock blasting operations.     

Effect of adsorbed metal ions on the transport of Zn- and Ni-EDTA complexes in a sand and gravel aquifer

Adsorption, complexation, and dissolution reactions strongly influenced the transport of metal ions complexed with ethylenediaminetetraacetic acid (EDTA) in a predominantly quartz-sand aquifer during two tracer tests conducted under mildly reducing conditions at pH 5.8 to 6.1. In tracer test M89, EDTA complexes of zinc (Zn) and nickel (Ni), along with excess free EDTA, were injected such that the lower portion of the tracer cloud traveled through a region with adsorbed manganese (Mn) and the upper portion of the tracer cloud traveled through a region with adsorbed Zn. In tracer test S89, Ni- and Zn-EDTA complexes, along with excess EDTA complexed with calcium (Ca), were injected into a region with adsorbed Mn. The only discernable chemical reaction between Ni-EDTA and the sediments was a small degree of reversible adsorption leading to minor retardation. In the absence of adsorbed Zn, the injected Zn was displaced from EDTA complexes by iron(III) [Fe(III)] dissolved from the sediments. Displacement of Zn by Fe(III) on EDTA became increasingly thermodynamically favorable with decreasing total EDTA concentration. The reaction was slow compared to the time-scale of transport. Free EDTA rapidly dissolved aluminum (Al) from the sediments, which was subsequently displaced slowly by Fe. In the portion of tracer cloud M89 that traveled through the region contaminated with adsorbed Zn, little displacement of Zn complexed with EDTA was observed, and Al was rapidly displaced from EDTA by Zn desorbed from the sediments, in agreement with equilibrium calculations. In tracer test S89, desorption of Mn dominated over the more thermodynamically favorable dissolution of Al oxyhydroxides. Comparison with results from M89 suggests that dissolution of Al oxyhydroxides in coatings on these sediment grains by Ca-EDTA was rate-limited whereas that by free EDTA reached equilibrium on the time-scale of transport. Rates of desorption are much faster than rates of dissolution of Fe oxyhydroxides from sediment-grain surfaces and, therefore, adsorbed metal ions can strongly influence the speciation of ligands like EDTA in soils and sediments, especially over small temporal and spatial scales.     

Uranium geochemistry in groundwater from tertiary sediments

Dissolved U concentrations and activity ratios (ARs) of the U isotopes in the ²³⁸U decay series were measured in ground and surface waters as part of an investigation to delineate the water quality in a proposed uranium mining area of northwest Nebraska. In oxidizing groundwaters from 67 wells completed in the Tertiary sediments, increasing U concentrations in the direction of groundwater flow generally were associated with a maturation of the formation water as evidenced by evolutionary trends in major ion character. The increased U levels probably are associated with leaching as shown by the positive correlation between U concentrations and total dissolved solids (TDS) (r = +0.83). The inverse relationships between TDS and U ARs (r = ?0.73) and U levels and ARs (r = 0.72) indicate that the decay of excess U-234 is related to maturation of the formation water and to sediment leaching along the flowpath. The data are described by a model which incorporates etching, decay and recoil and suggests that aquifer residence time can be estimated from the TDS level.The levels of soluble U in a reducing uraniferous hydrogeologic unit near Crawford, Nebraska are affected by the proximity of the sample collection to ore. In groundwater samples having similar chemistries (Na-SO₄ + Cl type), similar Ehs, and collected from a close-knit pattern, U concentrations ranged from 0.01 to 2,037 μg l^?1 and ARs ranged from 0.75 to 12.6. This high variability in U levels and ARs is indicative of uranium ore in small areal studies where low ARs almost always are associated with high U concentrations.     

Enhancing Microbial Sulfate Reduction of Hydrocarbons in Groundwater Using Permeable Filled Borings

At a service station closed in 1993, groundwater contained benzene that persisted above the cleanup goal of 1 mg/L in zones depleted of background sulfate. The benzene and other petroleum hydrocarbons (PHCs) were present as much as 36 feet (11 m) below the water table and therefore remediation of a thick saturated zone interval was required. Microcosms using site sediments demonstrated that anaerobic benzene biodegradation occurred only if sulfate was added, suggesting sulfate addition as a remediation approach. Twenty-four boreholes (9.1″ diameter and 56′ deep) were drilled around four monitoring wells, in which benzene concentrations exceeded 1 mg/L. The boreholes were backfilled with a mixture of gravel and 15,000 pounds of gypsum (which releases sulfate as it dissolves) to create “Permeable Filled Borings” (PFBs). Concurrently, nine high pressure injections (HPIs) of gypsum slurry were conducted in other site locations (312 pounds of gypsum total). PFBs were expected to release sulfate for up to 20 years, whereas HPIs were expected to produce a short-lived plume of sulfate. Concentrations of benzene and sulfate in groundwater were monitored over a 3-year period in six monitoring wells. In two wells near PFBs, benzene concentrations dropped below the cleanup goal by two to three orders of magnitude; in one well, sulfate concentrations exceeded 500 mg/L for the most recent 18 months. Benzene concentrations in two other PFB monitoring wells declined by a factor of 2 to 4, but remained above 1 mg/L, presumably due to high-dissolved PHC concentrations and possibly greater residual PHC mass in adjacent sediments, and therefore greater sulfate demand. However, hydrogen and sulfur isotopic enrichment in benzene and sulfate, respectively, confirmed biodegradation of benzene and stimulation of sulfate-reducing conditions. Thus, it is hypothesized that the PHC mass in adjacent sediments will decline over time, as will dissolved PHC concentrations, and eventually benzene concentrations will decrease below the cleanup goal. Benzene in two HPI monitoring wells was below the cleanup goal for all but one sampling event before HPIs were conducted and remained below the cleanup goal after HPIs; there was no stimulation of sulfate-reducing conditions. It is concluded that sulfate released from PFBs contributed to declining benzene concentrations.     

A late Holocene paleoenvironmental reconstruction from Agua Caliente,southern Belize,linked to regional climate variability and cultural change at the Maya polity of Uxbenká

We report high-resolution macroscopic charcoal, pollen and sedimentological data for Agua Caliente, a freshwater lagoon located in southern Belize, and infer a late Holocene record of human land-use/climate interactions for the nearby prehistoric Maya center of Uxbenká. Land-use activities spanning the initial clearance of forests for agriculture through the drought-linked Maya collapse and continuing into the historic recolonization of the region are all reflected in the record. Human land alteration in association with swidden agriculture is evident early in the record during the Middle Preclassic starting ca. 2600 cal yr BP. Fire slowly tapered off during the Late and Terminal Classic, consistent with the gradual political demise and depopulation of the Uxbenká polity sometime between ca. 1150 and 950 cal yr BP, during a period of multiple droughts evident in a nearby speleothem record. Fire activity was at its lowest during the Maya Postclassic ca. 950–430 cal yr BP, but rose consistent with increasing recolonization of the region between ca. 430 cal yr BP and present. These data suggest that this environmental record provides both a proxy for 2800 years of cultural change, including colonization, growth, decline, and reorganization of regional populations, and an independent confirmation of recent paleoclimate reconstructions from the same region.     

Evaluation of Simultaneous Analyte Leaching/Vapour Phase Introduction for Direct Osmium Isotope Ratio Measurements in Solid Samples by Double-Focusing Sector Field ICP-MS

The analytical performance of a method for Os isotope ratio measurement by double‐focusing, sector field ICP‐MS (ICP‐SFMS) was evaluated. The method is based on several optimised, concurrent processes: Os extraction from samples in hot concentrated nitric acid; separation of Os from the digest solution by the formation of volatile osmium tetroxide accelerated by continuous hydrogen peroxide addition; transport of analyte vapour by an oxygen flow into the ICP; and isotopic determination by ICP‐SFMS. Due to the very efficient utilisation of analyte (approaching 0.5‰), Os isotope ratio measurement could be performed at low pg levels. Combined with an ability to process sample sizes up to 2 g (up to 50 g if the organic matrix of biological or botanical samples is eliminated by ashing), materials with Os concentrations in the low, or even sub pg g^?1 range could be determined by this method. Given that two complete digestion/distillation systems were available for interchangeable use, throughputs of up to fifteen samples per 8 hour shift could be achieved. The method precision, evaluated as the long‐term reproducibility of ¹⁸⁷ Os/¹⁸⁸Os ratio measurements in a commercial Os reference sample containing 0.5 ng Os, was 0.16% relative standard deviation (RSD, 1s). The method has been applied to perform replicate ¹⁸⁷ Os/¹⁸⁸ Os ratio measurements on a suite of fifty reference materials of various origins and matrix compositions, with Os concentrations varying from < 0.1 pg g^?1 to > 100 ng g^?1, yielding an average precision of 3% RSD. Though none of the materials tested are certified for Os content or Os isotope composition, comparison of the obtained data with published Os isotope information for similar sample types revealed close agreement between the two. The method can also be used for the simultaneous, semi‐quantitative determination of Os concentrations.     

Finite-element analysis of the transport of water and solutes in title-drained soils

The finite-element method based on a Galerkin technique was used to formulate the problem of simulating the two-dimensional (cross-sectional) transient movement of water and solute in saturated or partially saturated nonuniform porous media. The numerical model utilizes linear triangular elements. Nonreactive, as well as reactive solutes whose behaviour can be described by a distribution coefficient or first-order reaction term were considered. The flow portion of the model was tested by comparison of the model results with experimental and finite-difference results for transient flow in an unsaturated sand column and the solute transport portion of the model was tested by comparison with analytical solution results. The model was applied to a hypothetical case involving movement of water and solutes in tile-drained soils. The simulation results showed the development of distinct solute leaching patterns in the soil as drainage proceeded. Although applied to a tile drainage problem in this study, the model should be equally useful in the study of a wide range of two-dimensional water and solute migration problems.