Infrasonic detection of a Leonid bolide: 1998 November 17

Abstract— During the early morning hours of the night of the peak of the annual Leonid meteor shower on 1998 November 17, a bright fireball (approximately ?12 to ?14 visual magnitude at 100 km in the zenith) was observed over northern New Mexico with visual sightings as far away from Los Alamos as Albuquerque (～150 km to the south of Los Alamos), including direct persistent trail observations at the U. S. A. F. Starfire Optical Range (SOR), which is also near Albuqerque. This event did not produce any sonic boom reports, presumably because of its high altitude. It was also detected locally by an infrared radiometer at Sandia National Laboratory and by an intensified charge-coupled device (CCD) camera located in Placitas, New Mexico. Subsequent investigations of the data from the six infrasound arrays used by Los Alamos National Laboratory (LANL) and operated for the Department of Energy as a part of the Comprehensive Test Ban Treaty (CTBT) Research and Development program for the International Monitoring System (IMS) showed the presence of an infrasonic signal from the proper direction at the correct time for this bolide from two of our six arrays (both located in Los Alamos). The infrasound recordings (i.e., the wave amplitude and period data) indicated that an explosion occurred in the atmosphere at a source height of ～93.5 km (with respect to sea level) or ～90 km with respect to the altitude of Los Alamos, having its origins slightly to the north and west of Los Alamos. Purely geometric solutions from the ground observers reports combined with direct measurements from the CCD camera at Placitas produced a source height of 91 ± 7 km. The signal characteristics analyzed from 0.5 to 3.0 Hz include a total duration of about 3–4 s for a source directed from Los Alamos toward 353.6 ± 0.4° measured from true north at a maximum elevation arrival angle of ～72.7°. The latter was deduced on the basis of the observed signal trace velocities (for the part of the recording with the highest cross-correlation) and ranged from a constant value of about 920–1150 m/s (depending on the window length used in the analysis) for a ray trajectory along a direct refractive path between the source and the Los Alamos arrays. The dominant signal frequency at maximum amplitude at Los Alamos was ～0.71 Hz. These highly correlated signals had a peak to peak, maximum amplitude of ～2.1 microbars (0.21 Pa). Using several methods that incorporate various observed signal characteristics, total distance traveled, etc., our analysis indicates that the bolide probably had a source energy of ～1.14 t (TNT equivalent) or 4.77 × 10⁹ J. This is ～14.1× smaller than the source energy estimate made using the infrasonic, empirical source energy relationship for low-altitude stationary point sources developed in the 1960s by the Air Force Technical Applications Center (AFTAC), Patrick Air Force Base, Florida. This relation was originally developed, however, for much larger source energies and at much longer ranges.     

Settlement over peat on the A5 at Pant Dedwydd near Cerrigydrudion, North Wales

The A5 London to Holyhead trunk road suffers from large and varied settlements at Pant Dedwydd where it crosses a geotrophic peat bog developed on the glacial drift that overlies bedrock of Silurian Denbigh Grits Group. Recent carriageway settlements have created an undulating profile over a 100 m stretch, restricting forward visibility and posing recurring and persistent difficulties for highway maintenance. The highly compressible peat underlies almost 400 m of highway, ranges up to 7 m deep and a typical profile consists of an upper sphagnum peat layer and a basal reedy, woody and sedge grass peat. The highway was originally constructed by Thomas Telford in 1819 as a low floating embankment over the organic terrain. Increases in traffic over the intervening period together with successive asphalt overlays have resulted in a history of major repairs and although records are incomplete it is likely that the carriageway is now over 2 m thick over parts of the bog. Comprehensive geological investigations carried out to characterize the peat deposit included dynamic probe holes, boreholes and a trial pit. No unusual subsurface conditions were identified. However, scrub willow or grey sallow (Salix cinerea) was observed growing in spiraea thickets alongside the deepest hollows in the highway. The willows may contribute to the road subsidence by extraction of water from the peat beneath the carriageway. Accordingly, removal of the scrub willow and conventional re-grading of the carriageway have been recommended to correct the existing problem.     

Dust injection into the Martian atmosphere

A mechanism for initiating global dust storms on Mars is proposed in which the diurnal variation of surface temperature results in the desorption of adsorbed CO₂, which under certain conditions can inject large amounts of fine (1–10 μm) dust into the atmosphere.     

Controls on the occurrence and prevalence of floodplain channels in meandering rivers

The process of channelization on river floodplains plays an essential role in regulating river sinuosity and creating river avulsions. Most channelization occurs within the channel belt (e.g. chute channels), but growing evidence suggests some channels originate outside of the channel‐belt in the floodplain. To understand the occurrence and prevalence of these floodplain channels we mapped 3064 km² of floodplain in Indiana, USA using 1.5 m resolution digital elevation models (DEMs) derived from airborne light detection and ranging (LiDAR) data. We find the following range of channelization types on floodplains in Indiana: 6.8% of floodplain area has no evidence of channelization, 55.9% of floodplains show evidence (e.g. oxbow lakes) of chute‐channel activity in the channel belt, and 37.3% of floodplains contain floodplain channels that form long, coherent down‐valley pathways with bifurcations and confluences, and they are active only during overbank discharge. Whereas the first two types of floodplains are relatively well studied, only a few studies have recognized the existence of floodplain channels. To understand why floodplain channels occur, we compared the presence of channelization types with measured floodplain width, floodplain slope, river width, river meander rate, sinuosity, flooding frequency, soil composition, and land cover. Results show floodplain channels occur when the fluvial systems are characterized by large floodplain‐to‐river widths, relatively higher meandering rates, and are dominantly used for agriculture. More detailed reach‐scale mapping reveals that up to 75% of channel reaches within floodplain channels are likely paleo‐meander cutoffs. The meander cutoffs are connected by secondary channels to form floodplain channels. We suggest that secondary channels within floodplains form by differential erosion across the floodplain, linking together pre‐existing topographic lows, such as meander cutoffs. Copyright © 2016 John Wiley & Sons, Ltd.     

Stream channel erosion in a rapidly urbanizing region of the US–Mexico border: documenting the importance of channel hardpoints with Structure‐from‐Motion photogrammetry

Urbanization can lead to accelerated stream channel erosion, especially in areas experiencing rapid population growth, unregulated urban development on erodible soils, and variable enforcement of environmental regulations. A combination of field surveys and Structure‐from‐Motion (SfM) photogrammetry techniques was used to document spatial patterns in stream channel geometry in a rapidly urbanizing watershed, Los Laureles Canyon (LLCW), in Tijuana, Mexico. Ground‐based SfM photogrammetry was used to map channel dimensions with 1 to 2 cm vertical mean error for four stream reaches (100–300 m long) that were highly variable and difficult to survey with a differential GPS. Regional channel geometry curves for LLCW had statistically larger slopes and intercepts compared with regional curves developed for comparable, undisturbed reference channels. Cross‐sectional areas of channels downstream of hardpoints, such as concrete reaches or culverts, were up to 64 times greater than reference channels, with enlargement persisting, in some cases, up to 230 m downstream. Percentage impervious cover was not a good predictor of channel enlargement. Proximity to upstream hardpoint, and lack of riparian and bank vegetation paired with highly erodible bed and bank materials may account for the instability of the highly enlarged and unstable cross‐sections. Channel erosion due to urbanization accounts for approximately 25–40% of the total sediment budget for the watershed, and channel erosion downstream of hardpoints accounts for one‐third of all channel erosion. Channels downstream of hardpoints should be stabilized to prevent increased inputs of sediment to the Tijuana Estuary and local hazards near the structures, especially in areas with urban settlements near the stream channel. Copyright © 2017 John Wiley & Sons, Ltd.     

Development and application of a spatially‐distributed Arctic hydrological and thermal process model (ARHYTHM)

A process‐based, spatially distributed hydrological model was developed to quantitatively simulate the energy and mass transfer processes and their interactions within arctic regions (arctic hydrological and thermal model, ARHYTHM). The model first determines the flow direction in each element, the channel drainage network and the drainage area based upon the digital elevation data. Then it simulates various physical processes: including snow ablation, subsurface flow, overland flow and channel flow routing, soil thawing and evapotranspiration. The kinematic wave method is used for conducting overland flow and channel flow routing. The subsurface flow is simulated using the Darcian approach. The energy balance scheme was the primary approach used in energy‐related process simulations (snowmelt and evapotranspiration), although there are options to model snowmelt by the degree‐day method and evapotranspiration by the Priestley–Taylor equation. This hydrological model simulates the dynamic interactions of each of these processes and can predict spatially distributed snowmelt, soil moisture and evapotranspiration over a watershed at each time step as well as discharge in any specified channel(s). The model was applied to Imnavait watershed (about 2·2 km²) and the Upper Kuparuk River basin (about 146 km²) in northern Alaska. Simulated results of spatially distributed soil moisture content, discharge at gauging stations, snowpack ablations curves and other results yield reasonable agreement, both spatially and temporally, with available data sets such as SAR imagery‐generated soil moisture data and field measurements of snowpack ablation, and discharge data at selected points. The initial timing of simulated discharge does not compare well with the measured data during snowmelt periods mainly because the effect of snow damming on runoff was not considered in the model. Results from the application of this model demonstrate that spatially distributed models have the potential for improving our understanding of hydrology for certain settings. Finally, a critical component that led to the performance of this modelling is the coupling of the mass and energy processes. Copyright © 2000 John Wiley & Sons, Ltd.     

Stable carbon isotope variations in northwest Europe during the last glacial–interglacial transition

Stable carbon isotope data that span part of the last glacial–interglacial transition (ca. 14-9 ka ¹⁴C BP; ca. 15–11 ka cal. BP), and which derive from organ-specific plant macrofossils recovered from two lake sediment profiles in the UK and one in Norway, are compared. The recorded temporal variations show similar trends, which, over a millennial time-scale appear to parallel the main drift in δ¹⁸O as determined for the GRIP ice-core. It is postulated that some smaller scale variations in the δ¹³C profiles may reflect the shorter term oscillations in δ¹⁸O values evident in the GRIP record, although this is less certain. Overall, however, the results suggest that stable carbon isotope measurements based on organ-specific terrestrial plant macrofossils may provide (i) a means for establishing correlations between terrestrial successions and (ii) additional paleoenvironmental information, as the apparent ‘shadowing’ of the GRIP record indicates a common forcing mechanism for both Greenland δ¹⁸O and northwest European δ¹³C variations. From the evidence available we suggest that the recorded δ¹³C variations reflect fluctuations in air temperature and/or changes in water vapour pressure in the atmosphere. © 1997 John Wiley & Sons, Ltd.