苏通大桥南主塔墩特大型钢吊箱GPS-RTK测量监控技术

苏通大桥南主塔墩承台钢吊箱长117.35 m,宽51.7 m,高14.4 m,总重量达5 800t,是目前世界上体积及重量最大的桥梁钢吊箱,本文阐述了在钢吊箱的拼装、下放及就位三个关键施工环节中,以GPS RTK卫星定位技术为主要测量手段的钢吊箱施工测控技术.     

The 2010 Yushu earthquake triggered landslide hazard mapping using GIS and weight of evidence modeling

The Yushu County, Qinghai Province, China, April 14, 2010, earthquake triggered thousands of landslides in a zone between 96°20′32.9″E and 97°10′8.9″E, and 32°52′6.7″N and 33°19′47.9″N. This study examines the use of geographic information system (GIS) technology and Bayesian statistics in creating a suitable landslide hazard-zone map of good predictive power. A total of 2,036 landslides were interpreted from high-resolution aerial photographs and multi-source satellite images pre- and post-earthquake, and verified by selected field checking before a final landslide-inventory map of the study area could be established using GIS software. The 2,036 landslides were randomly partitioned into two subsets: a training dataset, which contains 80 % (1,628 landslides), for training the model; and a testing dataset 20 % (408 landslides). Twelve earthquake triggered landslide associated controlling parameters, such as elevation, slope gradient, slope aspect, slope curvature, topographic position, distance from main surface ruptures, peak ground acceleration, distance from roads, normalized difference vegetation index, distance from drainages, lithology, and distance from all faults were obtained from variety of data sources. Landslide hazard indices were calculated using the weight of evidence model. The landslide hazard map was compared with training data and testing data to obtain the success rate and predictive rate of the model, respectively. The validation results showed satisfactory agreement between the hazard map and the existing landslide distribution data. The success rate is 80.607 %, and the predictive rate is 78.855 %. The resulting landslide hazard map showed five classes of landslide hazard, i.e., very high, high, moderate, low and very low. The landslide hazard evaluation map should be useful for environmental recovery planning and reconstruction work.     

石家庄地震前兆台网月评价系统

基于VB语言,利用C/S架构,编写石家庄地震前兆台网月评价系统,设置不同功能单元,开展仪器运行监控、台网日常运维监控,通过界面选择相应日期,读取省前兆台网中心发布的《运行监控日报》等Excel文件,使用input box函数等在文本框中输入、统计、计算,并显示地震前兆台网月评价成绩及台网运行情况。     

Effects of strong ground motion on the susceptibility of gully type debris flows

Typhoon Herb in 1996 caused widespread debris flows in central Taiwan. The 7.3 Chi-Chi earthquake on September 21, 1999, which also took place in central Taiwan, induced many landslides in the region. These landslides turned into debris flows when Typhoon Toraji struck Taiwan in 2001. This research selects three regions which suffered a ground motion class of 5, 6, and 7 on the Richter scale during the Chi-Chi earthquake as study areas. Air photos from 1997 and 2001 of these regions are used to map the gully-type debris flows that took place after Typhoons Herb and Toraji, respectively. The gullies adjacent to the debris flow, but without a trace of debris flows, are also mapped as the non-debris flow data. The topography, hydrogeology, and rainfall factors – where debris flow occurred and in which there was no occurrence of debris flows in these gullies were retrieved from DTM, geological maps, and iso-countour maps, and of rainfall through GIS processing. These characteristic are introduced into a probabilistic neural network to build a predicting model for the probability of the occurrence of debris flows. Three series of cross analyses are conducted to compare the probability of the occurrence of debris flows of the same dataset predicted by different prediction models. The results reveal that the susceptibility of debris flows was elevated after the Chi-Chi earthquake struck. The upsurge of susceptibility was more obvious for the regions that received a higher class of ground motion.     

西藏尼木变质岩特征及变质温压条件

出露于雅鲁藏布江缝合带北侧尼木县的变质岩主要由石榴黑云片麻岩和黑云斜长角闪角岩组成.研究表明岩石变质程度达到角闪角岩相-辉石角岩相;石榴子石变斑晶具有生长环带,角闪石均为钙质角闪石,黑云母大多为铁质黑云母和铁叶云母,长石多为更长石和中长石,少量为正长石.利用石榴子石-黑云母温度计、石榴子石-黑云母-斜长石-石英压力计和角闪石-斜长石温度及压力计计算获得石榴黑云片麻岩和黑云斜长角闪角岩的变质温度分别为619 ～661℃,695 ～ 702℃,压力范围分别为1.86～1.94kbar和3.69～4.56kbar.野外和室内研究认为岩石原岩为冈底斯带南缘叶巴组火山岩及其上部沉积岩,岩石经历了高温低压的接触变质作用.结合已有冈底斯带陆缘岩浆活动特征,对变质岩的形成环境和过程进行了反演.     

Effect of flying altitude and pulse repetition frequency on laser scanner penetration rate for digital elevation model generation in a tropical forest

In tropical forests, the penetration ability of airborne laser scanning (ALS) may be limited because of highly dense vegetation cover. However, in the typical planning of ALS surveys, the ability of laser pulses to penetrate forests is not considered. Nine round-trip flight lines covering the area of a tropical forest on the northeast side of the Tsengwen Reservoir in Taiwan were designed in this study. Five flight lines flew at altitudes of 1.525, 1.830, 2.135, 2.440, and 2.745 km, and the other four had pulse repetition frequencies (PRFs) of 100, 150, 200, and 250 kHz. The laser penetration index (LPI) is a quantitative index measuring the penetration ability of the ALS and consists of the ratio of the number of laser pulses reaching the forest floor to the total number of laser pulses. The LPI was used to represent the laser penetration rate and investigate the influence of flying altitude and PRF on the LPI. The results showed that as the flying altitude decreased by 1 km, the average LPI increased by 10%, and as the PRF decreased by 50 kHz, the average LPI increased by 2%. The effect of the LPI on digital elevation models (DEMs) was confirmed by visual images obtained by DEMs at five altitudes. The DEM obtained at an altitude of 2.745 km was coarsely textured, whereas that obtained at an altitude of 1.525 km was finely textured. The in-situ height data obtained from the electronic Global Navigation Satellite System (eGNSS) were compared with the data of the ALS-generated DEMs. The results indicated that when the LPI ≥60%, the height difference between the in situ data and DEM data was not prominent. However, when the LPI <60%, the ALS-derived DEM could be higher or lower than the in-situ height; the largest difference between the two was 1.7 m. The LPI of a forest should be considered for ALS survey planning, especially when consistent DEM precision for large tropical forest areas is paramount.     

地震勘探资源频率域叠加方法研究

在叠前共深度点道集内各地震道的动、静校正误差很小的情况下，地震资料时间域水平叠加方法有较好的叠加结果。但是，如果动、静校正的误差较大时，叠加效果将受到影响，即叠后振幅和分辨率都会降低。因此，提出一种频率域叠加方法。该方法既具有常规水平叠加方法能提高信噪比的优点，又能将共深度点道集内的走时时差消除，达到内相叠回的目的。几个比较叠加方法效果的有噪CDP道集叠加的例子证明了该方法的效果。     

土质场地重力式挡土墙地震土压力振动台实验研究

汶川震区路基挡土墙震害表明,地震动荷载作用下重力式挡墙的位移、破坏与基础场地形式有关,除岩质场地和土质场地挡墙所共有的外倾形式,土质地基挡土墙还表现有整体推移及下部向外推移的倾转变形等复杂模式,因此地震土压力大小及分布也将受到这种复杂土-结相互作用的影响。基于碎石土及风化花岗岩填料的土质场地重力式挡土墙大型振动台模型实验,对挡土墙地震土压力及变形模式开展了对比研究,发现在强震作用下,土质地基挡墙因基础约束较弱而产生位移,并伴随明显的墙—土分离现象,致使实测地震土压力较之抗震设计规范计算值偏小（0.4g峰值加速度下约小6%～15%）,但作用点高度变化不大。由实验结果与现行抗震规范计算值的安全系数对比,认为对土质场地挡墙的地震土压力计算,按现行国内抗震设计规范基本能满足实际工程抗震设计需要;对于地震区挡墙设计,在允许挡墙发生少量容许位移的前提下可采用内摩擦角较大、自稳能力更好的墙背填料以减少地震土压力。     

Determination of vertical displacements over the coastal area of Korea due to the ocean tide loading using GPS observations

This paper describes the GPS applicability for detecting the vertical displacements of ground stations caused by ocean tide loading effects. An experiment was carried out using 12 permanent GPS stations located in the coastal area of Korea using data in the period 1 July until 26 August 2003. The relative height differences were calculated from hourly DGPS data processing based on the carrier-phase observation. The power spectra of the M₂ and N₂ constituents of ocean tide loading were derived using the CLEAN algorithm. The differential vertical displacements generated by the ocean tide loading effect are typically 3–25 mm in coastal area of the Korea. We compared the results from GPS with those of the ocean tide models, NAO.99Jb regional model and GOT00.2, FES99 global models. The M₂ (N₂) amplitude differences of vertical displacements between GPS and GOT00.2 is 1.22 ± 3.61 mm (1.01 ± 1.48 mm), and that of the M₂ (N₂) amplitude difference between GPS and FES99 is 0.04 ± 4.64 mm (0.64 ± 1.75 mm), whereas the M₂ (N₂) amplitude difference between GPS and NAO.99Jb are 0.05 ± 1.03 mm (0.86 ± 1.18 mm). The highest vertical displacements at the PALM station are found for 24.5 ± 0.7 mm from GPS observation, and 22.9 mm from the regional model NAO.99Jb and 13.17 and 10.00 mm from the global models GOT00.2 and FES99, respectively. These values show that the vertical displacements derived from GPS are in good agreement with those of the regional model NAO.99Jb around Korea, more than with the global models. This result indicated that GPS is an effective tool to measure the vertical displacement caused by the ocean tide loading effect in the coastal area, and we need to use the NAO.99Jb ocean tide model rather than the global ocean tide models in and around the Korean peninsula for position determination with permanent GPS installations. This work demonstrates that vertical displacement caused by the M₂ and N₂ constituents of ocean tide loading can be measured by carrier-phase DGPS.