Inversion of Source Parameters for Moderate Earthquakes Using Short-Period Teleseismic P Waves

In this paper, we introduce a new method for estimating the source parameters of moderate earthquakes (M _w ~5.0) by modeling short-period teleseismic waveforms. This method uses a grid-search algorithm to minimize misfits between observed data and synthetic seismograms in depth, magnitude, and mechanism domain in a relative high-frequency range of 0.8–2.0 Hz, similar to the traditional cut-and-paste method used in regional modeling (Zhu and Helmberger, Bull Sesimol Soc Am 86:1634–1641, 1996). In this frequency range, a significant challenge is determining the initial P-wave polarity because of a low signal-to-noise ratio (SNR). Therefore we first determine source properties for a master earthquake with a relative strong SNR. Both the travel time and amplitude corrections are developed relative to the reference 1D model along each path used in inverting the master event. We then applied these corrections to other earthquakes clustered in the same area to constrain the initial P polarities. Thus the focal mechanisms can be determined reasonably well. We inverted focal mechanisms for a small set of events beneath Qeshm Island in southern Iran and demonstrate the importance of radiation pattern at short periods.     

The petrogenesis of the Lac Guyer komatiites and basalts and the nature of the komatiite-komatiitic basalt compositional gap

A sequence of ultramafic rocks in the Lac Guyer Archean greenstone belt exhibit brecciated flow tops, pillow structures, and spinifex textures testifying to their volcanic origin. Massive, spinifex-textured and differentiated flows in the sequence have the chemical characteristics of peridotitic komatiite, with MgO ranging from 19–25 wt.%. Associated pillowed flows have compositions that straddle the conventional boundary between komatiite and komatiitic basalt with MgO contents ranging from 16 to 19 wt.% MgO and are best termed pyroxenitic komatiites. Unlike other komatiitic occurrences, the peridotitic and pyroxenitic komatiites at Lac Guyer constitute a continuous chemical spectrum with no evidence of population minimum near 18 wt.% MgO. The contrasting behaviour of highly compatible elements, such as Ni and Cr, versus incompatible elements, such as Zr, indicate that this compositional spectrum was produced by a variation in the extent of partial melting (10–40%) of a garnet lherzolite source in the Archean mantle. The pyroxenitic komatiites represent liquids produced during lower (10–20%) degrees of melting during which garnet remained in the mantle residue. However, a change in slope in the distribution of Zr vs. Y between the pyroxenitic and the peridotitic komatiites indicates that garnet was completely consumed at the more extensive degrees of melting which produced the peridotitic komatiites. The Lac Guyer volcanic rocks display a population minimum at 15 wt.% MgO separating komatiitic magmas whose compositions are controlled by partial melting from basalts whose composition is controlled by crystal fractionation. The population minimum near 18 wt.% MgO which is taken as the boundary between komatiite and komatiitic basalt may have a similar origin.     

Basic lavas of the Archean La Grande Greenstone belt: Products of polybaric fractionation and crustal contamination

Despite the fact that some greenstone belts preserve the record of contemporaneous komatiitic and tholeiitic volcanism, a genetic link between the two is not widely accepted. The significance of a compositional gap seperating these magma types and differences in their respective degree of light rare earth element (LREE) enrichment, cited as evidence against a derivative relationship, are complicated by the possibility of crustal assimilation by magmas of komatiitic affinity. In the Archean La Grande Greenstone belt of northern Quebec a succession of metamorphosed tholeiitic basalts and younger, high-Mg, LREE-enriched andesites are preserved. The tholeiites are differentiated basaltic rocks whose chemical compositions appear to have been controlled by low pressure, gabbroic fractional crystallization and are similar to Type 1 MORB. Parental magmas were probably high-Mg liquids of compositions similar to komatiitic basalts which also occur in the greenstone belt. These high-Mg liquids are believed to be themselves the product of high pressure, OLIV+OPX fractional crystallization of more magnesian primary liquids of komatiitic composition. The higher La/Sm ratios of komatiitic basalts and tholeiites relative to komatiites in this belt, can be explained by small degrees of crustal assimilation. In the central part of the belt, late-stage, mafic igneous rocks have chemical compositions similar to Archean examples of contaminated volcanic rocks (e.g., Kambalda, Australia). These late-stage lavas consist of basalts and andesites with high-Mg, Ni and Cr abundances, LREE-enriched profiles and low Ti abundances. They are believed to be the products of crustal assimilation and crystallization of OPX-PLAG-CPX from high-Mg liquids of komatiitic affinity. The volcanic stratigraphy records the progressive effects of crustal contamination through time. A light sialic crust may have initially acted as a density barrier, preventing the eruption of primary high-Mg liquids and forcing fractionation at depth which produced more buoyant compositions. With subsequent thinning of the crust, the density barrier presumably failed, and primary liquids migrated directly toward the surface. Reaction of these liquids with tonalitic crust produced contaminated differentiates.     

Speculations on the nature and cause of mantle heterogeneity

Hotspots and hotspot tracks are on, or start on, preexisting lithospheric features such as fracture zones, transform faults, continental sutures, ridges and former plate boundaries. Volcanism is often associated with these features and with regions of lithospheric extension, thinning, and preexisting thin spots. The lithosphere clearly controls the location of volcanism. The nature of the volcanism and the presence of ‘melting anomalies’ or ‘hotspots’, however, reflect the intrinsic chemical and lithologic heterogeneity of the upper mantle. Melting anomalies—shallow regions of ridges, volcanic chains, flood basalts, radial dike swarms—and continental breakup are frequently attributed to the impingement of deep mantle thermal plumes on the base of the lithosphere. The heat required for volcanism in the plume hypothesis is from the core. Alternatively, mantle fertility and melting point, ponding and focusing, and edge effects, i.e., plate tectonic and near-surface phenomena, may control the volumes and rates of magmatism. The heat required is from the mantle, mainly from internal heating and conduction into recycled fragments. The magnitude of magmatism appears to reflect the fertility, not the absolute temperature, of the asthenosphere. I attribute the chemical heterogeneity of the upper mantle to subduction of young plates, aseismic ridges and seamount chains, and to delamination of the lower continental crust. These heterogeneities eventually warm up past the melting point of eclogite and become buoyant low-velocity diapirs that undergo further adiabatic decompression melting as they encounter thin or spreading regions of the lithosphere. The heat required for the melting of cold subducted and delaminated material is extracted from the essentially infinite heat reservoir of the mantle, not the core. Melting in the upper mantle does not requires the instability of a deep thermal boundary layer or high absolute temperatures. Melts from recycled oceanic crust, and seamounts—and possibly even plateaus—pond beneath the lithosphere, particularly beneath basins and suture zones, with locally thin, weak or young lithosphere. The characteristic scale lengths—150 to 600 km—of variations in bathymetry and magma chemistry, and the variable productivity of volcanic chains, may reflect compositional heterogeneity of the asthenosphere, not the scales of mantle convection or the spacing of hot plumes. High-frequency seismic waves, scattering, coda studies and deep reflection profiles are needed to detect the kind of chemical heterogeneity and small-scale layering predicted from the recycling hypothesis.     

Xenolith evidence for lithospheric melting above anomalously hot mantle under the northern Canadian Cordillera

A comparison of mantle xenolith suites along the northern Canadian Cordillera reveals that the xenoliths from three suites exhibit bimodal populations whereas the xenoliths from the other four suites display unimodal populations. The bimodal suites contain both fertile lherzolite and refractory harzburgite, while the unimodal suites are dominated by fertile lherzolite xenoliths. The location of the three bimodal xenolith suites correlates with a newly discovered P-wave slowness anomaly in the upper mantle that is 200 km in width and extends to depths of 400–500 km (Frederiksen AW, Bostock MG, Van Decar JC, Cassidy J, submitted to Tectonophysics). This correlation suggests that the bimodal xenolith suites may either contain fragments of the anomalously hot asthenospheric mantle or that the lithospheric upper mantle has been affected by the anomalously hot mantle. The lherzolite xenoliths in the bimodal suites display similar major element compositions and trace element patterns to the lherzolite xenoliths in the unimodal suites, suggesting that the lherzolites represent the regional lithospheric upper mantle. In contrast, the harzburgite xenoliths are highly depleted in terms of major element composition, but their clinopyroxenes [Cpx] have much higher incompatible trace element contents than those in the lherzolite xenoliths. The major element and mildly incompatible trace element systematics of the harzburgite and lherzolite xenoliths indicate that they could be related by a partial melting process. The lack of textural and geochemical evidence for the former existence of garnet argues against the harzburgite xenoliths representing actual fragments of the deeper anomalous asthenospheric mantle. Furthermore, the calculated P-wave velocity difference between harzburgite and lherzolite end-members is only 0.8%, with the harzburgites having higher P-wave velocities. Therefore the 3% P-wave velocity difference detected teleseismically cannot be produced by the compositional difference between the lherzolite and harzburgite xenoliths. If temperature is responsible for the observed 3% P-wave velocity perturbation, the anomalous mantle is likely to be at least 200 °C higher than the surrounding mantle. Taken together these data indicate that the refractory harzburgite xenoliths represent the residue of 20–25% partial melting of a lherzolite lithospheric mantle. The incompatible trace element enrichment of the harzburgites suggests that this melting was accompanied by the ingress of fluids. The association of the bimodal xenolith suites with the mantle anomaly detected teleseismically suggests that anomalously hot asthenospheric mantle provided both the heat and volatiles responsible for the localized melting and enrichment of the lithospheric mantle. Received: 16 May 1997 / Accepted: 25 October 1997     

Serpentinization of cumulate ultramafic rocks from the North Arm Mountain massif of the Bay of Islands ophiolite

Partially serpentinized dunites and wehrlites comprise the bulk of the cumulate ultramafic unit at the North Arm Mountain massif of the Bay of Islands ophiolite complex, Newfoundland. In a suite of 59 dunites and werhlites from the base of the unit, the serpentinized portions consist of lizardite + chrysotile + brucite + (accessory) magnetite. The ratio of $\text{(}\text{lizardite}\text{+}\text{chrysotile}\text{)}\text{to brucite}\text{= ~8:2 (}\text{weight percent}\text{)}$. Petrographic observations show that most serpentinization occurred at the expense of olivine; only limited amounts of clinopyroxene were serpentized. An estimated volume increase of 32% accompanied serpentinization of the peridotites. Reconstructions of the primary modal proportions of wehrlites (made taking this volume increase into account) contain an average of 6% more clinopyroxene and 6% less olivine than do modal reconstructions that ignore the volume increase. Mass balance calculations provide no clear evidence for appreciable metasomatism of Al₂O₃, CaO, FeO, MgO, or SiO₂ during Serpentinization. The presence of brucite, the evidence that most serpentinization occurred at the expense of olivine, and the lack of appreciable metasomatism, suggest that the primary reaction that controlled serpentinization of the peridotites is: $\text{2Mg}{}_2\text{SiO}{}_2\text{+ 3H}{}_2\text{O ? Mg}{}_3\text{Si}{}_2\text{O}{}_5\text{(OH)}{}_4\text{+ Mg(OH)}{}_2$. olivine added serpentine brucite     

Geochemical provenancing of igneous glacial erratics from Southern Britain,and implications for prehistoric stone implement distributions

Sixteen basic and intermediate composition igneous glacial erratics from Anglian (pre-423,000 years) deposits in Hertfordshire and Buckinghamshire, southern Britain, were selected for chemical and petrographic analysis in order to determine their original source outcrops. Major and trace element compositions suggest that seven samples (plus two uncertain) originated in the Lower Carboniferous volcanics of the Scottish Midland Valley (SMV), four came from the Upper Carboniferous quartz dolerite association which crops out in Scotland, northern England (Whin Sill) and extends to Norway, and one came from the northern England Cleveland Dyke. One sample of altered dolerite is ambiguous but has some similarity to the Old Red Sandstone (Devonian) age lavas of the SMV, and one meta-basalt sample may be from southwest Scotland or Scandinavia. These results identify specific outcrops which provided glacial erratics within currently accepted ice trails in the United Kingdom, and provide the first supporting evidence based on geochemistry, rather than petrography, for these ice movements. The distribution and provenance of glacial erratics are of importance in archaeological studies, because erratics provided a potential source of raw material for stone implement production. There is a marked geographical correlation between the distribution of prehistoric stone implements of quartz dolerite in the United Kingdom, and directions of ice movements from quartz dolerite outcrops within Britain. This correlation lends support to the hypothesis that prehistoric man made extensive use of glacial erratics for implement manufacture, as an alternative to quarrying at outcrops and subsequent long-distance trade. © 1999 John Wiley & Sons, Inc.