Baseline studies of delaware ocean outfall sites

A quarterly sampling programme was conducted during 1973–1974 off the coast of Delaware to provide an environmental baseline for two ocean sewage outfalls. Extensive physical measurements and water quality data, together with biological data (fish, invertebrates, bacteriological samples), were collected. Based on this research the design of sewage treatment for one of the outfalls was improved.     

A study of small aftershocks of the Oroville California, earthquake sequence of August 1975

The August 1, 1975 earthquake near Oroville, California, occurred along the Sierra foothills in a region characterized by occasional moderate earthquakes. Several earthquakes in the general region, including those in 1869, 1875, and 1909, appear to have had significant aftershock sequences. The general character of the aftershock sequence of the Oroville earthquake thus does not appear to be anomalous when measured against the known seismic history of this area.

Four smoked-paper micro-earthquake recorders were deployed immediately following the occurrence of the main earthquake to attempt to define the structural associations of the principal earthquake by location and analysis of aftershocks. Focal locations for 243 micro-earthquakes in the magnitude range of 1–3 were selected from the 30-day period (August 2–September 1), during which monitoring was continued. The aftershocks clearly define a planar surface striking north–south and dipping west at 62° from the surface to a depth of about 12 km. Aftershocks during the first two days of monitoring defined a surface of active faulting of approximately 100 km². Extension of this surface both to the north and south began on August 5 at focal depths of 5–10 km, resulting in a total ruptured area of approximately 125 km². The number of aftershocks per day decreased at the rate oft^−1.1, but the decay curve was punctuated by several secondary aftershock sequences. No. direct relationship between the aftershock sequence and the presence of Oroville Reservoir was observed.     

Metamorphic olivine in ultramafic rocks from Western Australia

Textural relationships plus associated mineralogy are compatible with a metamorphic origin for some olivines in altered ultramafics. Upper amphibolite facies PT conditions are indicated.     

Petrology of the Mecklenburg gabbro-metagabbro complex,North Carolina

The Mecklenburg complex, which crops out in the Carolina Piedmont, consists of older metagabbro and metafelsic rocks of upper amphibolite grade, and a younger postmetamorphic gabbro. On the evidence of field data and gravity measurements, the younger gabbro appears to be a plug-like body with steeply dipping contacts that may converge inward at relatively shallow depth; the pluton may extend only 8,000–15,000 feet into the subsurface.Gabbroic rocks contain plagioclase, olivine, orthopyroxene, clinopyroxene, hornblende, and biotite, and display hypidiomorphic textures characterized by numerous reaction relations among the mafic phases; hydrous minerals are commonly abundant, comprising up to 37% of the rock, and indicate the fugacity of H₂O was relatively high during primary crystallization. In contrast metagabbro lacks olivine and exhibits textures that range from relict igneous varieties to crystalloblastic types that appear to represent equilibrium assemblages. A less common metagabbro type, associated with local zones of deformation, is characterized by faint banding and only trace amounts of anhydrous mafics. Varieties of metagabbro are complexly intermingled in the field, and resultant assemblages and textures largely reflect whole-rock composition and differences in initial H₂O contents, slightly modified locally by addition of fluid along favorable channelways.In general metagabbro is slightly higher in TiO₂, Na₂O, and K₂O, and lower in MgO relative to gabbro; regardless of the degree of recrystallization, the chemistry of the various metagabbro types is nearly identical, thus indicating metamorphism was essentially isochemical.     

HST Observations of Sakurai's Object (V4334 Sgr) and Related Stars

We describe our ongoing program of HST observations of Sakurai's Object(V4334 Sgr). Direct WFPC2 imaging from August 1996 through August 2000 revealsno transient features (such as light echoes), and documents the decline of thestar to below 24th visual magnitude in 2000. The surrounding planetary nebulahas shown no changes from 1996 through 2000. There are no obvious peculiarfeatures (such as blobs or knots) in the immediate vicinity of the star. Wealso have in place a target-of-opportunity program to obtain UV spectra withHST in the event that the star begins to retrace its evolution back to highsurface temperature. We also present older HST FOC imaging of V605 Aql. The central object is aresolved nebula that emits in [O III] (but not in hydrogen), whose 0.6diameter is consistent with a dust cloud ejected during the 1919 outburst. Thecentral star itself is not seen due to its being embedded in the nebula.Several other central stars (including H 3-75, IC 2120, and Abell 14) havelate-type nuclei and no evidence for hot companions. They may be furthercandidates for born-again red-giant nuclei.     

Mobile Pb-isotopes in Proterozoic sedimentary basins as guides for exploration of uranium deposits

Lead isotope ratios and associated trace element concentrations (U, Th and Pb) extracted by partial-leaching with 2% nitric acid from Proterozoic sandstones and basement rocks reveal much about the fluid evolution of sedimentary basins hosting unconformity-type uranium deposits. In addition, these techniques have great potential as a guide for exploration of uranium and other types of deposits in basins of any age. Isotope ratios of Pb in Proterozoic sandstones from basins known to contain high-grade uranium deposits are radiogenic at key geological localities and settings distal to known mineralization and particularly in altered zones proximal to mineralization. Sandstones completely cemented by quartz overgrowths typically have non-radiogenic Pb isotope ratios, indicating early closure of porosity and isolation of these rocks from later fluid events. Alternatively, the unconformity served as both a source of uranium and radiogenic Pb as well as an avenue for late-stage (<250–900 Ma) fluid flow. The mafic volcanic units, which are relatively reducing lithologies and therefore have removed uranium from basinal brines, have uranium-supported radiogenic Pb isotope ratios. Comparison of ²³⁸U/²⁰⁶Pb and ²⁰⁶Pb/²⁰⁴Pb ratios is useful in determining the timing and nature of U and Pb migration before, during and after mineralization in these basins. This comparison can be used to delineate the presence of radiogenic Pb isotope ratios that are not internally supported by uranium and thorium in rocks, eventually providing the explorationist with geochemical vectors that point toward sites of high potential for economic uranium mineralization.     

Asymmetric mantle dynamics in the MELT region of the East Pacific Rise

The mantle electromagnetic and tomography (MELT) experiment found a surprising degree of asymmetry in the mantle beneath the fast-spreading, southern East Pacific Rise (MELT Seismic Team, Science 280 (1998) 1215–1218; Forsyth et al., Science 280 (1998) 1235–1238; Toomey et al., Science 280 (1998) 1224–1227; Wolfe and Solomon, Science 280 (1998) 1230–1232; Scheirer et al., Science 280 (1998) 1221–1224; Evans et al., Science 286 (1999) 752–756). Pressure-release melting of the upwelling mantle produces magma that migrates to the surface to form a layer of new crust at the spreading center about 6 km thick (Canales et al., Science 280 (1998) 1218–1221). Seismic and electromagnetic measurements demonstrated that the distribution of this melt in the mantle is asymmetric (Forsyth et al., Science 280 (1998) 1235–1238; Toomey et al., Science 280 (1998) 1224–1227; Evans et al., Science 286 (1999) 752–756) at depths of several tens of kilometers, melt is more abundant beneath the Pacific plate to the west of the axis than beneath the Nazca plate to the east. MELT investigators attributed the asymmetry in melt and geophysical properties to several possible factors: asymmetric flow passively driven by coupling to the faster moving Pacific plate; interactions between the spreading center and hotspots of the south Pacific; an off-axis center of dynamic upwelling; and/or anomalous melting of an embedded compositional heterogeneity (MELT Seismic Team, Science 280 (1998) 1215–1218; Forsyth et al., Science 280 (1998) 1235–1238; Toomey et al., Science 280 (1998) 1224–1227; Wolfe and Solomon, Science 280 (1998) 1230–1232; Evans et al., Science 286 (1999) 752–756). Here we demonstrate that passive flow driven by asymmetric plate motion alone is not a sufficient explanation of the anomalies. Asthenospheric flow from hotspots in the Pacific superswell region back to the migrating ridge axis in conjunction with the asymmetric plate motion can create many of the observed anomalies.     

Laboratory simulations of coastally trapped waves with rotation, topography and stratification

We describe observations of the generation and propagation of coastally trapped waves in the laboratory and their comparison with theory, over a range of values of several experimental parameters. The topography and stratification used consisted of a sloping continental shelf and vertical continental slope with three-layer stratification that could be approximated by an extended version of the Gill and Clarke model [Gill, A.E., Clarke, A., 1974. Wind-induced upwelling, coastal currents and sea level changes. Deep Sea Res. 21, 325–345]. The latter was modified to accommodate a central mixed layer, curved geometry, and friction on the shelf. This configuration represents coastal geometry with large Burger number. The experiments were successful in realizing coastally trapped waves that were consistent with the theoretical expectations. However, the waves propagated more slowly, and for narrow shelves were damped more rapidly than predicted by the theory. The first was attributed to: (i) the effect of stratification on fluid on the shelf, reducing the topographic Rossby wave effect; (ii) the parameterization of the viscosity. The second difference was attributed to the mechanism of generation: the paddle used did not always generate sinusoidal waves, and the subsequent dispersion resulted in a net loss of amplitude.     

Diffusion Samplers as an Inexpensive Approach to Monitoring VOCs in Ground Water

Diffusion samplers installed in observation wells were found to be capable of yielding polyethylene to transmit other volatile compounds, such as benzene and toluene, indicates that the samplers can be used for a variety of volatile organic compounds. In wells at the study area, the volatile organic compound concentrations in water samples obtained using the samplers without prior purging were similar to concentrations in water samples obtained from the respective wells using traditional purging and sampling approaches. The low cost associated with this approach makes it a viable option for monitoring large observation-well networks for volatile organic compounds.