Factors influencing the high fluoride concentration in groundwater of Vellore District,South India

Most of the arid and semi-arid zones of the Indian subcontinent experience serious health problems due to high concentration of fluoride in drinking water. The Vellore District of Tamil Nadu suffers from high concentration of fluoride in water. However, most of the past studies in this region focused on tannery-related pollution and not on fluoride contamination. The present study attempts to identify the factors influencing the origin and spatial distribution of fluoride in the district. From the observed hydrochemical results of 68 well samples in the context of water level, well depth and hydrochemical parameters, F^? concentration showed increasing trend in the presence of Na⁺ and HCO₃ ^?. This is due to the alkaline nature of groundwater that favors the dissolution of F^?-rich minerals. The occurrence of high fluoride in Na–HCO₃ type of water confirmed this hypothesis. However, Ca²⁺ showed an insignificant correlation with F^?. The high Na/Ca ratio (>1) in 73 % of the samples and the result of Na/Na+Cl plot suggest the occurrence of cation exchange in the study area. The major source of F^? was identified as products of the weathering and the dissolution of fluorites, amphiboles and micas present in the geological formations in the study area. The positive relationship between NO₃ ^? and F^? in few wells located in agricultural fields suggest possible source of F^? from the application of fertilizers. More than 25 % of the samples had higher values of fluoride than the permissible limit of drinking water according to Indian standards. Spatial distribution of fluoride showed a higher concentration in the southwest part of the study area, namely, Thirupathur and Vaniyambadi. This study shows that contamination was high in certain parts of Vellore District and the quality of water must be maintained by resorting to appropriate treatment and management strategies.     

Use of site amplification and anelastic attenuation for the determination of source parameters of the Sikkim earthquake of September 18, 2011, using far-field strong-motion data

An earthquake of magnitude 6.9 (M _w) occurred in the Sikkim region of India on September 18, 2011. This earthquake is recorded on strong-motion network in Uttarakhand Himalaya located about 900 km away from the epicenter of this earthquake. In this paper acceleration record from six far-field stations has been used to compute the source parameters of this earthquake. The acceleration spectra of ground motion at these far-field stations are strongly affected by both local site effects and near-site anelastic attenuation. In the present work the spectrum of S-phase recorded at these far-field stations has been corrected for anelastic attenuation at both source and site and the site amplification terms. Site amplifications at different stations and near-site shear wave attenuation factor have been computed by the technique of inversion of acceleration spectra given by Joshi et al. (Pure Appl Geophys 169:1821–1845, 2012a). For estimation of site amplification and shear wave quality factor [Q _β (f)] at the recording sites, ten local events recorded at various stations between July 2011 and December 2011 have been used. The obtained source spectrum from acceleration records is compared with the theoretical source spectrum defined by Brune (J Geophys Res 76:5002, 1970) at each station for both horizontal components of the records. Iterative forward modeling of theoretical source spectrum gives the average estimate of seismic moment (M _o), source radius (r _o) and stress drop (Δσ) as (3.2 ± 0.8) × 10²⁶ dyne cm, 13.3 ± 0.8 km and 59.2 ± 8.8 bars, respectively, for the Sikkim earthquake of September 18, 2011.     

Ionospheric disturbances with the time of occurrence, magnitude and location of the earthquake (M6.5) near the Indian subcontinent

The present study purports the analysis of total electron content (TEC, which is one of the major ionosphere anomalies during the earthquake), sea surface temperature (SST) and outgoing long-wave radiation (OLR) during the earthquake event recorded on 10 March 2013 (M = 6.5). Global assimilative ionosphere modelled output TEC values have been used for this present study; the clear signature of TEC during the recorded earthquake has been noticed (i.e. increase in TEC 60–70 TECU during the event). The correlation between the magnitude and location of earthquake with TEC is around 0.9, and the least correlation between SST and OLR is due to concerned atmospheric effects; we tried to study the variations of SST and OLR prior during and after the event from Kalpana satellite image products archived by IMD.     

Flood hazard assessment with multiparameter approach derived from coupled 1D and 2D hydrodynamic flow model

Hydrodynamic flow modeling is carried out using a coupled 1D and 2D hydrodynamic flow model in northern India where an industrial plant is proposed. Two flooding scenarios, one considering the flooding source at regional/catchment level and another considering all flooding sources at local level have been simulated. For simulating flooding scenario due to flooding of the upstream catchment, the probable maximum flood (PMF) in the main river is routed and its flooding impact at the plant site is studied, while at the local level flooding, in addition to PMF in the main river, the probable maximum precipitation at the plant site and breaches in the canals near the plant site have been considered. The flood extent, depth, level, duration and maximum flow velocity have been computed. Three parameters namely the flood depth, cross product of flood depth and velocity and flood duration have been used for assessing the flood hazard, and a flood hazard classification scheme has been proposed. Flood hazard assessment for flooding due to upstream catchment and study on local scale facilitates determination of plinth level for the plant site and helps in identifying the flood protection measures.     

Earthquake damage identification: a case study using soft classification approach

The October 8, 2005, Kashmir earthquake (M _w 7.6) affected the rough mountainous regions of India and Pakistan with poor accessibility, and thus, no proper comprehensive ground survey was possible. However, due to the ability of remote sensing technology to acquire spectral measurements of damaged areas at various spatial and temporal scales, extraction of damaged areas can be carried out quickly and with great reliability. The fuzzy-based classifiers [Possibilistic c-Means (PCM), noise cluster (NC), and NC with entropy (NCE)] were applied to identify 2005 Kashmir earthquake, induced landslides, as well as built-up damage (BD) areas, as soft computing approaches using supervised classification. Results indicate that for the identification of landslides and BD areas, NCE classifier generated the best outputs, while for the identification of built-up undamaged areas, NC classifier generated the best output. Further, it was found that the proposed Class Based Sensor Independent (CBSI) technique can improve spectral information of specific class for better identification.     

Modeling the behaviour of alluvial and blasted quarried rockfill materials

Two types of modeled rockfill materials were collected from Renuka dam site, Himachal Pradesh, India and Salma dam site, Afghanistan. The rockfill material collected from Renuka dam site is rounded to sub-rounded in shape and the rockfill material collected from Salma dam site is angular to sub-angular in shape. The prototype gradation rockfill material consists maximum particle size larger than 1,000 mm. Therefore, for carrying out laboratory testing and modeling the bahaviour, the prototype rockfill material is scaled down to the maximum particle size (d_max) of 25, 50 and 80 mm for both projects material using parallel gradation technique. Triaxial compression and Index properties tests were conducted on both project rockfill materials and are presented. From the triaxial behaviour, it is observed that the stress–strain behaviour is non-linear, inelastic and stress dependent for both the materials. The material compresses during the initial shearing and shows dilation effect with further shearing. It is observed that the ?-value for alluvial rockfill material increases with increase in d_max and reverse trend is observed for blasted quarried rockfill material which shows the importance of the type of material. The stress–strain-volume change behaviour of both projects modeled rockfill material was predicted by using hierarchical single surface (HISS) model based on elasto plasticity and compared with the laboratory test results. From the comparison, it is observed that both results match closely. It is, therefore, suggested that the behaviour of both types of rockfill materials can be characterized successfully using HISS model.     

On anomalously high sub-surface dissolved oxygen in the Indian sector of the Southern Ocean

The Southern Ocean (SO) plays a critical role in global ocean productivity and carbon cycling. Bio-Argo floats deployed in the Indian sector of the Southern Ocean provides new insights into the biogeochemical processes. Here we report significantly higher dissolved oxygen(DO) (~?310 μmol/kg) in summer of 2014–2015 for one float (F1) and winter of 2014 in other float (F2) at sub-surface layer in the subantarctic region of the SO. The summer DO peak in F1 was 10% higher than those during the summer of succeeding year, while the winter DO peak in F2 was 20% higher than those during the winter of succeeding year. Temperature and dynamic height structure show that cyclonic eddies play an important role in the observed increase in the dissolved oxygen: the high DO is a manifestation of the co-occurrence of a cold core eddy which transported the cold oxygen rich water from deep to the surface during winter, while, during summer, the high chlorophyll below the mixed layer depth (MLD) also contributed to the elevated DO. Low apparent oxygen utilisation suggests that the observed high oxygen concentration was due to high production rates over the consumption.

     

Bootstrap aggregating approach to short-term load forecasting using meteorological parameters for demand side management in the North-Eastern Region of India

Theoretical and Applied Climatology - Electricity is an essential commodity that must be generated in response to demand. Hydroelectric power plants, fossil fuels, nuclear energy, and wind energy...