Lightcurves and phase relations of the asteroids 82 alkmene and 444 Gyptis

The asteroids 82 Alkmene and 444 Gyptis were observed photoelectrically at Table Mountain Observatory and at Torino Observatory during their 1979 oppositions. The rotation periods and amplitudes of variation observed were, for 82: P_syn = 12.^h999, Δm = 0.55; and for 444: P_syn = 6.^h214, Δm = 0.15. The phase relation of 82 Alkmene can be well fit to the theory of K. Lumme and E. Bowell (Astron. J. (1981), 86, 1705). It showed a probable decrease in brightness of ～0.04 mag from 1 month before opposition to 2 months after opposition, which can be attributed to the changing viewing aspect coupled with polar flattering of the asteroid. The phase relation of 444 Gyptis is poorly fit by the Lumme and Bowell theory when only Q and V(0η) are treated as variables. A good fit can be obtained by adjusting some of the other parameters of their theory, but the physical interpretation is ambiguous.     

Application of electrical imaging to leachate plume evolution studies under in-situ and model conditions

Electrical imaging (resistivity tomography) is increasingly used as a geophysical exploration technique in contaminated land research. The present work demonstrates the efficiency of electrical imaging in monitoring pollution plume evolution under both in-situ and model conditions. The in-situ campaign was done at an unlined landfill site situated in the city of Patras, Hellas. A partially saturated zone of alluvial fan deposits underlies the site, which retards leachate percolation to the underlying water table. Electrical imaging provided details of the internal structure of the waste tip, and confirmed the presence of a leachate plume beneath the base of the landfill. This field data component provided the constraints for the design of a generic model of contaminant infiltration into partially saturated sand. The aim was to study leachate plume evolution in a laboratory environment. For this purpose, a miniaturised resistivity tomography technique, developed at Cardiff University, was used to image the resistivity distribution before during and after contaminant infiltration. Comparison of resulting two-dimensional tomography with observed plume geometry at the end of the test showed the miniaturised electrical imaging technique to be highly effective. Experiment showed that contaminant evolution taking place in the model was gravity-driven, with capillary water in the vadose zone being displaced by the denser contaminant solution.     

Stable isotope and fluid inclusion evidence for the origin of the Brandberg West area Sn–W vein deposits, NW Namibia

The Brandberg West region of NW Namibia is dominated by poly-deformed turbidites and carbonate rocks of the Neoproterozoic Damara Supergoup, which have been regionally metamorphosed to greenschist facies and thermally metamorphosed up to mid-amphibolite facies by Neoproterozoic granite plutons. The meta-sedimentary rocks host Damaran-age hydrothermal quartz vein-hosted Sn–W mineralization at Brandberg West and numerous nearby smaller deposits. Fluid inclusion microthermometric studies of the vein quartz suggests that the ore-forming fluids at the Brandberg West mine were CO₂-bearing aqueous fluids represented by the NaCl–CaCl₂–H₂O–CO₂ system with moderate salinity (mean=8.6 wt% NaCl_equivalent).Temperatures determined using oxygen isotope thermometry are 415–521°C (quartz–muscovite), 392–447°C (quartz–cassiterite), and 444–490°C (quartz–hematite). At Brandberg West, the oxygen isotope ratios of quartz veins and siliciclastic host rocks in the mineralized area are lower than those in the rocks and veins of the surrounding areas suggesting that pervasive fluid–rock interaction occurred during mineralization. The O- and H-isotope data of quartz–muscovite veins and fluid inclusions indicate that the ore fluids were dominantly of magmatic origin, implying that mineralization occurred above a shallow granite pluton. Simple mass balance calculations suggest water/rock ratios of 1.88 (closed system) and 1.01 (open system). The CO₂ component of the fluid inclusions had similar δ ¹³C to the carbonate rocks intercalated with the turbidites. It is most likely that mineralization at Brandberg West was caused by a combination of an impermeable marble barrier and interaction of the fluids with the marble. The minor deposits in the area have quartz veins with higher δ ¹⁸O values, which is consistent with these deposits being similar geological environments exposed at higher erosion levels.     

Discrete element modelling of deep penetration in granular soils

This paper presents a numerical study on deep penetration mechanisms in granular materials with the focus on the effect of soil–penetrometer interface friction. A two‐dimensional discrete element method has been used to carry out simulation of deep penetration tests on a granular ground that is under an amplified gravity with a K₀ lateral stress boundary. The numerical results show that the deep penetration makes the soil near the penetrometer move in a complex displacement path, undergo an evident loading and unloading process, and a rotation of principal stresses as large as 180°. In addition, the penetration leads to significant changes in displacement and velocity fields as well as the magnitude and direction of stresses. In general, during the whole penetration process, the granular ground undergoes several kinds of failure mechanisms in sequence, and the soil of large deformation may reach a stress state slightly over the strength envelope obtained from conventional compression tests. Soil–penetrometer interface friction has clear effects on the actual penetration mechanisms. Copyright © 2005 John Wiley & Sons, Ltd.     

A Comparison of Match Ozonesonde-Derived and 3D Model Ozone Loss Rates in the Arctic Polar Vortex during the Winters of 1994/95 and 1995/96

Ozone loss rates from ozonesonde data reported in the Match experiments of winters 1994/95 and 1995/96 inside the Arctic polar vortex are compared with simulations of the same winters performed using the SLIMCAT 3D chemistry and transport model. For 1994/95 SLIMCAT reproduces the location and timing of the diagnosed ozone destruction, reaching 10 ppbv/sunlit hour in late January as observed. SLIMCAT underestimates the loss rates observed in February and March by 1–3 ppbv/sunlit hour. By the end of March, SLIMCAT ozone exceeds the observations by 25–35%. In January 1995 the ozonesonde-derived loss rates at levels above 525 K are not chemical in origin but due to poor conservation of air parcels. Correcting temperature biases in the model forcing data significantly improved the agreement between the model and observed ozone at the end of winter 1994/95, increasing ozone destruction in SLIMCAT in February and March. The SLIMCAT simulation of winter 1995/96 does not reproduce the maximum ozone loss rates diagnosed by Match of 13 ppbv/sunlit hour. Comparing the data for the two winters reveals that the SLIMCAT photochemistry is least able to reproduce observed losses at low temperatures or when low temperatures coincide with high solar zenith angles (SZA). When cold (T = 192 K), high SZA (90°)matches are excluded from the 1995/96 analysis, agreement between the diagnoses and SLIMCAT is better with ozone loss rates of up to 6 ppbv/sunlit hour. For the rest of the winter SLIMCAT consistently underestimates the Match rates of ozone loss by 1–3 ppbv/sunlit hour. In March 1996 the monthly mean SLIMCAT ozone is 50% greater than observations at 430–540 K. In both winters, ozone destruction rates peaked more rapidly and declined more slowly in the Match observations than in the SLIMCAT simulations. The differences between the observed and modelled cumulative ozone losses demonstrate that the total ozone destruction by the end of the winter is sensitive to errors in the instantaneous ozone loss rates of 1–3 ppbv/sunlit hour.     

Oscillations in a laboratory flotation machine

In a laboratory Denver machine, worn impeller/stator assemblies lead to strong, rapid oscillations of the water level in the standpipe at impeller speeds just below self-aeration. Frequency depends linearly on impeller speed, decreasing with impeller depth. Amplitude passes through a maximum with speed, increasing with depth. A mechanism accounting for oscillation is suggested. The possibility that the phenomena lies in the operating range of commercial-size machines is discussed. The described effects are confined to standpipe/self-aeration machines. Oscillation can be prevented by supplying air with an external blower, a growing trend even with traditionally self-aerating designs. Oscillation recommences just prior to flooding.     

Some observations concerning the morphology and sedimentology of a protalus rampart,Okstindan, Norway

A protaius rampart up to 4.75 m high and consisting largely of angular clasts up to boulder size is described. Bulk samples contained up to 35 per cent fines by weight, compared with up to 68 per cent fines in adjacent till. Although the rampart material was clast dominated, fines filled much of the void space, in contrast with most other protalus ramparts described in the literature.     

Seismic resistance of precast concrete shear walls

The earthquake resistance of stacked precast concrete simple shear walls found typically in Large Panel buildings of the cross-wall type is studied. Physical model testing on a small shaking table facility and analytical techniques are compared. Results of the testing of four models to failure portrayed the non-linear effects of rocking and shear slip that were assumed in several analytical studies but were never before measured experimentally. The physical model studies are supplemented with an independent mathematical analysis using a modified version of the dynamic, non-linear computer code Drain 2–D. Correlation of the analytical and experimental results show that the computer study can be used to predict the overall shear wall response. Results of the small scale model and the mathematical model studies indicate that the simple shear wall behaves in a non-linear manner, even for low magnitudes of base acceleration. Non-linear effects, usually concentrated in only one or two joints, reduced force levels and increased displacements. The four small scale models that were tested withstood high magnitudes of base acceleration without collapse.     

Mixing and gangue dispersion in flotation machine pulps

Tracer experiments using quartz in sized ranges to simulate gangue minerals provide information on how impeller speed, air rate, and particle size determine the concentration of gangue in the uppermost pulp layers. Tests with and without a froth will contribute towards an understanding of the selective action of the froth column.Results indicate that the laboratory machine-operating conditions required for flotation coincide with a hydrodynamic region which is responsible for fine-gangue transfer from the pulp into the froth column by elutriation and entrainment process acting in the pulp, thus compromising the selective action of the flotation process itself.Topics are suggested requiring further investigation and mention is made of machine design features to which attention should be paid in attempting to reduce gangue transfer from pulp to froth.     

Black material on mineral inclusions and in internal fracture planes in diamond

The black material observed on the surface of crystalline inclusions in diamond and also in adjacent internal fracture planes has been classified as a result of a preliminary examination of several hundred diamonds from Sierra Leone, Ghana, and South Africa (particularly the Premier Mine), as well as diamond slices of unknown origin, followed by a detailed examination of some 100 diamonds. X-ray, electron diffraction, and qualitative electron microprobe techniques were used in identifying this material as graphite, pyrrhotite and pentlandite. The possible origins of these minerals are discussed.