Geodynamic models and their application in the combined interpretation of geological and geophysical data (a review)

The paper presents a review of investigations in the field of the theory and practice of the interpretation of geological and geophysical data with geodynamic models that were carried out mainly by researchers of the Institute of Physics of the Earth, Russian Academy of Sciences. Evolutionary models of platform structures, passive continental margins, rift zones, and orogens are examined. The review presents formulations of inverse problems and results of interpretation for various regions, including sedimentary basins of the East European Platform, Atlantic Ocean margins, the Caucasus, the South Urals, and others.     

Geo-Characterization at selected accelerometric stations in Crete (Greece) and comparison of earthquake data recordings with EC8 elastic spectra

To estimate the seismic response according to Eurocode (EC8) and almost all other national codes, site conditions have to be properly characterized so that soil amplification and the corresponding peak ground motion can be calculated. In this work, different geophysical and geotechnical methods are combined in order to define the detailed ground conditions in selected sites of the Hellenic Accelerometric Network (HAN) in Crete. For this purpose, the geological information of the sites and shear wave velocity, calculated from surface wave measurements, is used. Additionally, ground acceleration data recorded through HAN have been utilized from intermediate depth earthquakes in the broader area of South Aegean Sea. Using the recorded ground motion data and the procedure defined in EC8, the corresponding elastic response spectrum is calculated for the selected sites. The resulting information is compared to the values defined in the corresponding EC8 spectrum for the seismic zone that includes the island of Crete. The comparison shows that accurate definition of ground type through geological, geotechnical and geophysical investigations is important. However, our current comparison focuses on the distribution of values rather than the absolute values of EC8-prescribed spectra, and the results should be considered in this context.     

Solution of H2O in diopside melts: a thermodynamic model

Structural similarities between dry diopside melt and superhydrous albite melt (X _w >0.5) — both lack three-dimensional silicate units — suggest that thermodynamic relations may be similar. A model based on that assumption successfully predicts diopside melting relations and H₂O solubilities. For the model, the three partial differential equations describing solution of H₂O in albite melt for X _w >0.5 have been integrated for diopside melt from X _w =0 to X _w at least as large as 0.76, with two exceptions: an alternative partial differential equation for Henrian solution of H₂O in dilute melts was applied for X _w <0.20, and an alternative differential equation for the pressure dependence of a _w at pressures below 2 kbar was developed. The latter alternative equation yields relatively small ¯V_w's at low pressures rather than the large ¯V_w's calculated from the equation from the albite system. Available experimental solubility data are not precise enough to offer a choice between the small-¯V_w and large-¯V_w equations. Integration of all the partial differential equations was constrained solely by the P and T of a single experimentally-determined point on the H₂O-saturated solidus.Solubilities calculated by a Henrian-analogue solution model (a _di=X _di ² ) from the experimental H₂O saturated solidus lie outside experimental solubility constraints for dilute melts. On the other hand, a Henrian model (a _di=X_di) successfully predicts solubilities in dilute melts. The formulation of the Henrian model and magnitudes of model molar entropies of solution are consistent with the hypothesis that H₂O dissolves in diopside melt as an essentially undissociated species with little ordering on melt structural sites. That species could in turn be consistently, if not uniquely, interpreted to be molecular H₂O or a hydroxylation (OH^–) complex formed from nonbridging oxygens.     

香港一富营养河港内的底泥耗氧和营养盐释放

Tolo Harbour has received massive discharges of municipal sewage, agricultural wastes and cottage industrial effluents, via three river systems, in the past two decades before the mid Eighties. The Harbour is almost land locked and poorly flushed. The soft sediment acted as a sink for nutrients and organic pollutants. After a decade of efforts in establishing and enforcing water pollution control legislations and upgrading wastewater treatment facilities, the sediments have turned into sources of nutrients and exert a measurable oxygen demand upon the overlying waters. In vitro measurements showed that the sediments oxygen demand (SOD) was between 17.6 and 54.3 mgo₂ · m^-2 · h^-1. The maximum rates of release of ortho-phosphate phosphorus and ammonia nitrogen were 15.0 and 206.0 mg · m^-2 · h^-1, respectively.     

Environmental Geochemistry of Iron and Manganese in Six Himalayan Lakes

The distribution and abundance of iron and manganese, the two important mobile metals, in an aquatic environment have been presented. These metals play an important role in the binding of nutrients and toxic elements by virtue of their high specific area in the oxide form. The concentration of Fe ranged from 1.08 to 5.2 mg/g and that of Mn from 0.27 to 2.17 mg/g. The Dal lake sediments were rich in Fe and those of the Wular lake had the lowest mean concentration of Fe. It was observed that the smaller particle size fractions had a higher metal content in comparison to large size fractions. Data on the selective extraction of Fe and Mn and their accumulation in humus material have also been given.     

Spatial and seasonal variability of sediment accumulation potential through controlled flooding of the beels located in the polders of the Ganges-Brahmaputra-Meghna delta of Southwest Bangladesh

The Ganges-Brahmaputra-Meghna (GBM) delta plain within Bangladesh is one of the most vulnerable to relative sea level rise (RSLR) in the world especially under current anthropogenically modified (i.e., embanked) conditions. Tidal river management (TRM) as practiced in coastal regions of Bangladesh may provide an opportunity to combat RSLR by raising the land level through controlled sedimentation inside beels (depression within embanked polders) with re-opening of polders. To date, TRM has been applied to tide-dominated coastal regions, but the potential applicability of TRM for the beels within the polders of river-dominated and mixed flow (MF) regimes remains to be assessed. We apply a calibrated 2D numerical hydromorphodynamic model to quantify sediment deposition in a beel flooded through breaching of the polder dike under conditions of river-dominated, tide-dominated and MF regimes for different seasons and applying different regulation schemes for the flow into the beel. Simulation results show considerable seasonality in sediment deposition with largest deposition during the monsoon season. The potential of controlled flooding is highest in the tide-dominated region, where sediment accumulation can be up to 28 times higher than in the river-dominated region. Regulating flow into a beel increases trapping efficiency, but results in slightly lower total deposition than without regulation. We conclude that re-establishing flooding of the beel within the polder without regulating the flow into the beel through breaching of the polder dike is a promising strategy for the mixed and tide-dominated flow regions in the delta as the sediment accumulation can raise the land surface at a higher rate than RSLR and effective SLR (ESLR). In the more upstream river-dominated section of the delta, accumulation rates would be much lower, but the pressure of sea level rise on these areas is lower as well. Owing to the abundant availability of sediment, application of controlled flooding like TRM therefore provides an opportunity to counteract the impact of RSLR and ESLR by means of land raising, particularly along the tidal river reaches in the GBM delta.     

In situ uptake of mercury by the intertidal mussel,Mytilus californianus

The in situ uptake of mercury in tissues of Mytilus californianus was studied by exposing control specimens to waters at four depths near a submarine wastewater discharge for a period of 24 weeks. The response patterns observed for digestive gland, adductor muscle and gonadal tissues were strikingly different. Digestive gland concentrations increased rapidly to the heightened levels found for indigenous specimens. On the other hand, changes in the mercury content of adductor muscle were not statistically significant, and gonadal tissues generally exhibited a low rate of increase. No correlation with depth was observed.     

Experimental silicate mineral/melt partition coefficients for beryllium and the crustal Be cycle from migmatite to pegmatite

Partition coefficients (D_Be^mineral/melt) for beryllium between hydrous granitic melt and alkali feldspars, plagioclase feldspars, quartz, dark mica, and white mica were determined by experiment at 200 MPa H₂O as a function of temperature (650-900°C), activity of Be in melt (trace levels to beryl saturation), bulk composition, and thermal run direction. At trace levels, Be is compatible in plagioclase of An₃₁ (1.84 at 700°C) and muscovite (1.35 at 700°C) but incompatible in biotite (0.39-0.54 from 650-800°C), alkali feldspar (0.38-0.19 from 680-850°C), quartz (0.24 at 800°C), and albite (0.10 at 750°C). The partition coefficients are different at saturation of the melt in beryl: lower in the case of plagioclase of An₃₁ (0.89 at 700°C), muscovite (0.87 at 700°C), biotite (0.18-0.08 from 675-800°C), alkali feldspar (0.18-0.14 from 680-700°C), and quartz (0.17-0.08 from 750-800°C), but higher in the case of albite (0.37 at 750°C).With other data sources, these new partition coefficients were utilized to track, first, the distribution of Be between aluminous quartzofeldspathic source rocks and their anatectic melts, and second, the dispersion or concentration of Be in melt through igneous crystal fractionation of different magma types (e.g., S-type, I-type) up to beryl-saturated granitic pegmatites and, finally, into their hydrothermal aureoles. Among the rock-forming minerals, cordierite, calcic oligoclase, and muscovite (in this order) control the fate of Be because of the compatibility of Be in these phases. In general, beryl-bearing pegmatites can arise only after extended crystal fractionation of large magma batches (to F, fraction of melt remaining, ≤0.05); granitic magmas that originate from cordierite-bearing protoliths or that contain large modal quantities of calcic oligoclase will not achieve beryl saturation at any point in their evolution.     

Discrete element modelling of fragmentable geomaterials with size dependent strength

This paper presents the application of a discrete element technique to the analysis of the dynamic indentation of either a purely brittle or a brittle viscoplastic geomaterial which can experience fragmentation resulting in fragments with size dependent strength characteristics.