Genesis of monazite and Y zoning in garnet from the Black Hills, South Dakota

The paragenesis of monazite in metapelitic rocks from the contact aureole of the Harney Peak Granite, Black Hills, South Dakota, was investigated using zoning patterns of monazite and garnet, electron microprobe dating of monazite, bulk-rock compositions, and major phase mineral equilibria. The area is characterized by low-pressure and high-temperature metamorphism with metamorphic zones ranging from garnet to sillimanite zones. Garnet porphyroblasts containing euhedral Y annuli are observed from the garnet to sillimanite zones. Although major phase mineral equilibria predict resorption of garnet at the staurolite isograd and regrowth at the andalusite isograd, textural and mass balance analyses suggest that the formation of the Y annuli is not related to the resorption-and-regrowth of garnet having formed instead during garnet growth in the garnet zone. Monazite grains in Black Hills pelites were divided into two generations on the basis of zoning patterns of Y and U: monazite 1 with low-Y and -U and monazite 2 with high-Y and -U. Monazite 1 occurs in the garnet zone and persists into the sillimanite zone as cores shielded by monazite 2 which starts to form in the andalusite zone. Pelites containing garnet porphyroblasts with Y annuli and monazite 1 with patchy Th zoning are more calcic than those with garnet with no Y annuli and monazite with concentric Th zoning. Monazite 1 is attributed to breakdown of allanite in the garnet zone, additionally giving rise to the Y annuli observed in garnet. Monazite 2 grows in the andalusite zone, probably at the expense of garnet and monazite 1 in the andalusite and sillimanite zones. The ages of the two different generations of monazite are within the precision of chemical dating of electron microprobe. The electron microprobe ages of all monazites from the Black Hills show a single ca. 1713 Ma population, close to the intrusion age of the Harney Peak Granite (1715 Ma). This study demonstrates that Y zoning in garnet and monazite are critical to the interpretation of monazite petrogenesis and therefore monazite ages.     

Mineralogical and chemical transformation of Oldoinyo Lengai natrocarbonatites, Tanzania

The minerals of Oldoinyo Lengai natrocarbonatite lavas are unstable under atmospheric conditions. Subsolidus mineral assemblages in natrocarbonatites were studied in 105 samples from contemporary eruptions ranging from present day to about 100 years old. The subsolidus minerals in natrocarbonatites were formed (i) along cracks on the lava surface from hot gases escaping during cooling, (ii) as atmospheric alteration by solution of water-soluble minerals, in particular halides and gregoryite, and by hydration of nyerereite under the influence of meteoric water and (iii) by reaction with fumarole gases. After solidification, the lavas were cut by a network of thin cracks, the edges of which are covered by polymineralic encrustations. Samples collected 2–24 h after eruption contain nahcolite, trona, sylvite, and halite with accessory kalicinite and villiaumite. Atmospheric humidity results immediately (≥ 2 h after eruption) in alteration of black lavas that is marked by the appearance of white powdery thermonatrite with nahcolite on the lava surface. Subsequent reaction (weeks, months, years) of natrocarbonatite with meteoric water and the atmosphere results in the formation of pirssonite, gaylussite, shortite, trona, thermonatrite, nahcolite and calcite. Generally, the first important step is the formation of pirssonite and the end-members are calcite carbonate rocks or loose aggregates. Fumarolic activity is common for the active northern crater of the volcano. Reaction of hot (54–141 °C) fumarolic gases with natrocarbonatite leads to the formation of sulphur, gypsum, calcite, anhydrite, monohydrocalcite, barite and celestine. Changes in mineralogy of the natrocarbonatite lead to substantial chemical transformation. The most obvious chemical changes in this process are the loss of Na, K, Cl and S, combined with an increase in H₂O, Ca, Sr, Ba, F and Mn. The oxygen and carbon isotopic composition of altered natrocarbonatites shows a significant shift from the primary “Lengai Box” to high values of δ¹⁸O and δ¹³C. Calcite exhibits δ¹³C values between − 2‰ and − 4‰ PDB and δ¹⁸O values of + 23‰ to + 26‰ SMOW. The observed assemblages of secondary minerals formed by reaction with atmosphere and meteoric water, the changes in chemical composition of the natrocarbonatite and field observations suggest that alteration of natrocarbonatite is an open-system low-temperature process. It takes place at temperatures between 8 and 43 °C with the addition of H₂O to the system and the removal of Na, K, Cl and S from the carbonatites. Low-temperature thermodynamic models developed for alkali carbonate systems can be used for the interpretation of Oldoinyo Lengai subsolidus mineralization.     

Microvariability of line profiles in the spectrum of the star ι Her

We present the results of a search for and analysis of line-profile variations in the spectrum of the star ι Her. The observations were acquired with the 1.8 m telescope of the Bohyunsan Optical Astronomy Observatory (Republic of Korea) in May–June 2004. We obtained 69 spectra of the star with signal-to-noise ratios ≈300 and a time resolution of 5–7 min. Profile variability was revealed for six lines of HI, HeI, and SiIII, in the central parts of the lines. The variability amplitude is ≈(1–2)% in units of the intensity of the adjacent continuum. Evidence was found for cyclic variations of the lines, with periods from ≈7^h to ≈2.9^d. We conclude that ι Her belongs to the group of slowly pulsating stars.     

Hydroextrusion as a possible mechanism for the ascent of diapirs,domes, and mantle plumes

A possible mechanism of the ascent of material within the Earth’s crust and mantle is the mechanism of hydroextrusion, i.e., the effect of squeezing of material under excess pressure. The major factors that predetermine the high plasticity of the material and its ability to produce hydroextrusions are high lithostatic pressures and temperatures. The phenomenon of hydroextrusion can be most clearly illustrated by the example of the origin of salt diapirs. The driving force of hydroextrusions of material in the crust and mantle is excess pressure, which can result from lateral differences between the densities of rocks (as is the case during the development of salt diapirs) and phase transitions associated with a volume increase. When the material of the upper mantle undergoes partial melting with the derivation of basaltic melts at depths of 60–100 km, excess pressures reach 80 MPa, whereas the plasticity limit of 20% melted rocks is no higher than 5 MPa. As a result, the partially molten material is forced from the melting region toward zones with lower lithostatic pressures. A local temperature increase in the transitional zones in the Earth’s mantle at positive dP/dT values of the phase transitions also gives rise to excess pressures, whose values can range from 100 to 800 MPa at a 0.5–3.0% volume change and which can be the driving force during the origin of mantle plumes. Original Russian Text ? V.N. Anfilogov, Yu.V. Khachai, 2006, published in Geokhimiya, 2006, No. 8, pp. 873–878.     

Neutron irradiation and post-irradiation annealing of rutile (TiO2−x ): effect on hydrogen incorporation and optical absorption

Neutron irradiation and post-irradiation annealing under oxidising and reducing conditions have been used to investigate H incorporation in, and the optical properties of, reduced (TiO_2−x ) rutile. Optical absorption in rutile is mainly due to a Ti³⁺ Ti⁴⁺ intervalence charge transfer effect. The main mechanism for H incorporation in rutile involves interstitial H not coupled to other defects, which has important implications for the rate of H diffusion, and possibly also on the electrical properties of rutile. Additional minor OH absorption bands in IR spectra indicate that a small amount of interstitial H is coupled to defects such as Ti³⁺ on the main octahedral site, and indicates that more than one H incorporation mechanism may operate. Concentration of oxygen vacancies has a controlling influence on the H affinity of rutile.     

Mudstone lithogeochemistry and formation conditions of Vendian deposits in the Shkapovo-Shikhan Basin

Variation of geochemical modules and indices in mudstones from the Upper Vendian Kairovo and Shkapovo groups of the Shkapovo-Shikhan Basin provides the comprehensive information on changes in maturity of the fine aluminosiliciclastic material delivered in the basin, characterizes the redox environment in bottom water, and makes it possible to reconstruct the rock composition in provenance and its evolution through time. The generally moderate maturity of the fine terrigenous clastic material suggests that a nearly semiarid-semihumid climate dominated in paleodrainage area throughout the Late Vendian. It has been established that reducing environment did not exist in bottom water of the central Shkapovo-Shikhan Basin throughout the Late Vendian. Intermediate rocks prevailed in the paleodrainage area. More silicic rocks could occur only in the early Staropetrovo and late Salikhovo times. Data points of mudstones from the Kairovo and Shkapovo Groups plotted on the Cr-Ni, Co-V, Co/Hf-Ce/Cr, La-Th, and La/Sm-Sc/Th diagrams indicate that both Archean and more mature Paleoproterozoic crustal blocks existed in different proportions in the Late Vendian within source areas.     

Bayesian Spatial Modelling of Gamma Ray Count Data

Gamma ray logging is a method routinely employed by geophysicists and environmental engineers in site geology evaluations. Modelling of gamma ray data from individual boreholes assists in the local identification of major lithological changes; modelling these data from a network of boreholes assists with lithological mapping and spatial stratigraphic correlation. In this paper we employ Bayesian spatial partition models to analyse gamma ray data spatially. In particular, a spatial partition is defined via a Voronoi tessellation and the mean intensity is assumed constant in each cell of the partition. The number of vertices generating the tessellation as well as the locations of vertices are assumed unknown, and uncertainty about these quantities is described via a hierarchical prior distribution. We describe the advantages of the spatial partition modelling approach in the context of smoothing gamma ray count data and describe an implementation that may be extended to the fitting of a more general model than a constant mean within each cell of the partition. As an illustration of the methodology we consider a data set collected from a network of eight boreholes, which is part of a geophysical study to assist in mapping the lithology of a site. Gamma ray logs are linked with geological information from cores and the spatial analysis of log data assists with predicting the lithology at unsampled locations.