Comparing spatially varying coefficient models: a case study examining violent crime rates and their relationships to alcohol outlets and illegal drug arrests

In this paper, we compare and contrast a Bayesian spatially varying coefficient process (SVCP) model with a geographically weighted regression (GWR) model for the estimation of the potentially spatially varying regression effects of alcohol outlets and illegal drug activity on violent crime in Houston, Texas. In addition, we focus on the inherent coefficient shrinkage properties of the Bayesian SVCP model as a way to address increased coefficient variance that follows from collinearity in GWR models. We outline the advantages of the Bayesian model in terms of reducing inflated coefficient variance, enhanced model flexibility, and more formal measuring of model uncertainty for prediction. We find spatially varying effects for alcohol outlets and drug violations, but the amount of variation depends on the type of model used. For the Bayesian model, this variation is controllable through the amount of prior influence placed on the variance of the coefficients. For example, the spatial pattern of coefficients is similar for the GWR and Bayesian models when a relatively large prior variance is used in the Bayesian model.      

Strategies to mitigate aliasing of loading signals while estimating GPS frame parameters

Although GNSS techniques are theoretically sensitive to the Earth center of mass, it is often preferable to remove intrinsic origin and scale information from the estimated station positions since they are known to be affected by systematic errors. This is usually done by estimating the parameters of a linearized similarity transformation which relates the quasi-instantaneous frames to a long-term frame such as the International Terrestrial Reference Frame (ITRF). It is well known that non-linear station motions can partially alias into these parameters. We discuss in this paper some procedures that may allow reducing these aliasing effects in the case of the GPS techniques. The options include the use of well-distributed sub-networks for the frame transformation estimation, the use of site loading corrections, a modification of the stochastic model by downweighting heights, or the joint estimation of the low degrees of the deformation field. We confirm that the standard approach consisting of estimating the transformation over the whole network is particularly harmful for the loading signals if the network is not well distributed. Downweighting the height component, using a uniform sub-network, or estimating the deformation field perform similarly in drastically reducing the amplitude of the aliasing effect. The application of these methods to reprocessed GPS terrestrial frames permits an assessment of the level of agreement between GPS and our loading model, which is found to be about 1.5 mm WRMS in height and 0.8 mm WRMS in the horizontal at the annual frequency. Aliased loading signals are not the main source of discrepancies between loading displacement models and GPS position time series.     

Building Web-Based Spatial Information Solutions around Open Specifications and Open Source Software

Geographic Information Systems (GIS) are moving from isolated, standalone, monolithic, proprietary systems working in a client‐server architecture to smaller web‐based applications and components offering specific geo‐processing functionality and transparently exchanging data among them. Interoperability is at the core of this new web services model. Compliance with Open Specifications (OS) enables interoperability. Web‐GIS software's high costs, complexity and special requirements have prevented many organizations from deploying their data and geo‐processing capabilities over the World Wide Web. There are no‐cost Open Source Software (OSS) alternatives to proprietary software for operating systems, web servers, and Relational Database Management Systems. We tested the potential of the combined use of OS and OSS to create web‐based spatial information solutions. We present in detail the steps taken in creating a prototype system to support land use planning in Mexico with web‐based geo‐processing capabilities currently not present in commercial web‐GIS products. We show that the process is straightforward and accessible to a broad audience of geographic information scientists and developers. We conclude that OS and OSS allow the development of web‐based spatial information solutions that are low‐cost, simple to implement, compatible with existing information technology infrastructure, and have the potential of interoperating with other systems and applications in the future.     

Toward micro-scale spatial modeling of gentrification

 A simple preliminary model of gentrification is presented. The model is based on an irregular cellular automaton architecture drawing on the concept of proximal space, which is well suited to the spatial externalities present in housing markets at the local scale. The rent gap hypothesis on which the model's cell transition rules are based is discussed. The model's transition rules are described in detail. Practical difficulties in configuring and initializing the model are described and its typical behavior reported. Prospects for further development of the model are discussed. The current model structure, while inadequate, is well suited to further elaboration and the incorporation of other interesting and relevant effects. Received: 1 November 2001 / Accepted: 12 April 2002 Town centres data were made available by kind permission of the UK Department of the Environment, Transport and the Regions.     

Application of SWACI products as ionospheric correction for single-point positioning: a comparative study

In Global Navigation Satellite Systems (GNSS) using L-band frequencies, the ionosphere causes signal delays that correspond with link related range errors of up to 100 m. In a first order approximation the range error is proportional to the total electron content (TEC) of the ionosphere. Whereas this first order range error can be corrected in dual-frequency measurements by a linear combination of carrier phase- or code-ranges of both frequencies, single-frequency users need additional information to mitigate the ionospheric error. This information can be provided by TEC maps deduced from corresponding GNSS measurements or by ionospheric models. In this paper we discuss and compare different ionospheric correction methods for single-frequency users. The focus is on the comparison of the positioning quality using dual-frequency measurements, the Klobuchar model, the NeQuick model, the IGS TEC maps, the Neustrelitz TEC Model (NTCM-GL) and the reconstructed NTCM-GL TEC maps both provided via the ionosphere data service SWACI (http://swaciweb.dlr.de) in near real-time. For that purpose, data from different locations covering several days in 2011 and 2012 are investigated, including periods of quiet and disturbed ionospheric conditions. In applying the NTCM-GL based corrections instead of the Klobuchar model, positioning accuracy improvements up to several meters have been found for the European region in dependence on the ionospheric conditions. Further in mid- and low-latitudes the NTCM-GL model provides results comparable to NeQuick during the considered time periods. Moreover, in regions with a dense GNSS ground station network the reconstructed NTCM-GL TEC maps are partly at the same level as the final IGS TEC maps.     

Fifty Years of Cartography at the University of Glasgow

Abstract

This paper documents ongoing glacier retreat in the eastern part of the Granatspitz Mountains (Hohe Tauern Range, Austrian Alps) for the time period 2003–2009 using aerial photogrammetry. Aerial photographs of 2003, 2006, and 2009 were made available by the Hydrological Service of the Regional Government of Salzburg, the Federal Office of Metrology, Surveying and Mapping, Vienna, and the Regional Government of the Tyrol, respectively. High resolution multi-temporal digital elevation models and digital orthophotos of the area of interest were derived using digital photogrammetric methods to provide a sound basis for glaciological research. Glacier outlines of the three glacial stages were mapped interactively. Temporal change in area and surface height of the glaciers mapped clearly document glacier retreat. Glacier mass balance based on the geodetic method was calculated for Stubacher Sonnblickkees (Glacier). Mean annual specific net balance amounts to ?656 mm w.e. for the time period 2003–2009, with a mass balance gradient of 324 mm w.e. (100 m)^?1 and an equilibrium-line altitude of 2995 m a.s.l. Digital orthophoto maps and other thematic maps, e.g. showing surface height change, were prepared to support further data interpretation. Both the study area and its spatio-temporal change were visualized with special emphasis on the glaciers in a computer generated video film. Another film (exposure 29 August 2011) shows the lower part of Stubacher Sonnblickkees and its surroundings for reasons of comparison.     

Earth observations during space shuttle flight STS‐41: Discovery's mission to planet earth

Abstract

Multi‐temporal ERS‐1 SAR data acquired over a large agricultural region in West Bengal was used to classify kharif crops like rice, jute and sugarcane. Rice crop grown under lowland management practice showed a temporal characteristic. The dynamic range of backscatter was highest for this crop in temporal SAR data. This was used to classify rice using temporal SAR data. Such temporal character was not observed for the other study crops, which may be due to the difference in cultivation practice and crop calendar. Significant increase in backscatter from the ploughed fields was used to derive information on onset and duration of land preparations. Synergistic use of optical remote sensing data and SAR data increased the separability of rice crop from homesteads and permanent vegetation classes.     

Near real-time high-resolution airborne camera,AEROCam, for precision agriculture

Precision agriculture often relies on high-resolution imagery to delineate the variability within a field. Airborne Environmental Research Observational Camera (AEROCam) was designed to meet the needs of agriculture producers, ranchers, and researchers, who require high-resolution imagery in a near real-time environment for rapid decision support. AEROCam was developed and operated through a unique collaboration between several departments at the University of North Dakota, including the Upper Midwest Aerospace Consortium (UMAC), the School of Engineering and Mines, and flight operations at the John D. Odegard School of Aerospace Sciences. AEROCam consists of a Redlake MS4100 area-scan multi-spectral digital camera that features a 1920 × 1080 CCD array (7.4-μm detector) with 8-bit quantization. When operated at ～2 km above ground level, multispectral images with four bands in the visible and near infrared have a ground sample distance of 1 m with a horizontal extent of just over 1.6 km. Depending on the applications, flying at different altitudes can adjust the spatial resolution from 0.25 to 2 m. Rigorous spectral and radiometric calibrations allow AEROCam to be used in a variety of applications, qualitative and quantitative. Equipped with an inertial measurement unit (IMU) system, the images acquired can be geo-referenced automatically and delivered to end users near real time through our Digital Northern Great Plains system (DNGP). The images are also available to zone mapping application for precision farming (ZoneMAP), an online decision support tool for creating management zones from remote sensing imagery and data from other sources. Operational since 2004, AEROCam has flown over 250 sorties and delivered over 150,000 images to the users in the Northern Great Plains region, resulting in numerous applications in precision agriculture and resource management.     

Accessibility Futures

This study uses accessibility as a performance measure to evaluate a matrix of future land use and network scenarios for planning purposes. The concept of accessibility dates to the 1950s, but this type of application to transportation planning is new. Previous research has established the coevolution of transportation and land use, demonstrated the dependence of accessibility on both, and made the case for the use of accessibility measures as a planning tool. This study builds off of these findings by demonstrating the use of accessibility‐based performance measures in the Twin Cities Metropolitan Area. This choice of performance measure also allows for transit and highway networks to be compared side‐by‐side. For roadway modeling, zone‐to‐zone travel time matrix was computed using stochastic user equilibrium (SUE) assignment with travel time feedback to trip distribution. A database of schedules was used on the transit networks to assign transit routes. This travel time data was joined with the land use data from each scenario to obtain the employment, population, and labor accessibility from each traffic analysis zone (TAZ) within specified time ranges. Tables of person‐weighted accessibility were computed for 20 minutes with zone population as the weight for employment accessibility and zone employment as the weight for population and labor accessibility. Maps of accessibility by zone were produced to show the spatial distribution of accessibility across the region. The results show that a scenario where population and employment growth are concentrated in the center of the metropolitan area would produce the highest accessibility no matter which transportation network changes are made. However, another scenario which concentrates population growth in the center of the metropolitan area and shifts employment growth to the periphery consistently outperforms the scenario representing the projected 2030 land use without any growth management strategy.     

Total evaporation estimation for accurate water accounting purposes: an appraisal of various available estimation methods

The estimation of total evaporation is fundamental for water accounting, considering its influence on water availability. Moreover, the current increase in water consumption (e.g. in sub-Saharan Africa and the world over), land cover/use changes, deteriorating water quality and the climate change projections in most regions of the world underscore the need to understand water loss. So far, different approaches have been developed and implemented in estimating the variations of total evaporation, with varying accuracies. The aim of this work was therefore, to provide a review of these different approaches for estimating total evaporation, as well as a detailed discussion of their strengths and weaknesses. Findings from this review have shown that total evaporation estimates derived, using ground-based meteorological and micro-meteorological methods are inadequate for representing its large-scale spatial variations. On the other hand, remote sensing technology, which acquires data at different resolutions (i.e. radiometric, spectral, spatial and temporal), provides timely, up-to-date and relatively accurate spatial estimates of total evaporation over large geographic coverage, for sustainable and effective water accounting, which is key for well-informed and improved management of water resources at both catchment and regional scales. In this regard, more details on the remote sensing-based methods of estimating total evaporation are provided, especially considering the robust technological advancements and its potential in characterizing earth features over time and space. This work has also managed to identify research gaps and challenges in the accurate estimation of total evaporation, using remote sensing, especially with the emergence of more advanced sensors and the characteristics of the landscape.