The Laramide orogeny: Evidence from cocorp deep crustal seismic profiles in the wind river mountains, wyoming

Deep crustal reflection data that are critical for the interpretation of Laramide structure have been obtained by the Consortium for Continental Reflection Profiling (COCORP). The Laramide orogeny, which occurred from the late Cretaceous to early Eocene, is characterized in Wyoming by large uplifts of Precambrian basement, commonly flanked by reverse faults. The attitude of these faults at depth has been a major tectonic problem and is very important for deciding whether horizontal or vertical crustal movements were primarily responsible for the basement uplifts. COCORP has run 158 km of deep seismic reflection profiles (recording to 20-sec two-way travel time) across the southeastern end of the Wind River Mountains, the largest of these Laramide uplifts. Reflections from the thrust fault flanking the Wind River uplift can be clearly traced on the profiles to at least 24-km depth and possibly as deep as about 36 km with a fairly uniform apparent dip of 30°–35°. Other reflection events subparallel to the main Wind River thrust are present in the seismic profiles and may represent other faults. There is at least 21 km of crustal shortening along the thrust. There is no evidence in the reflection profiles for large-scale folding of the basement; the Wind River Mountains were formed predominantly by thrust movements. Gravity anomalies in the Wind River Mountains can be modeled by a thrust that displaces dense material in the lower crust. If the thrust ever cut the Moho, the effect is not observed in the gravity today. A proposed model for the presence of uplifted basement in Wyoming invokes a shallowly dipping, subducted Farallon plate beneath the North American continent; drag between the two plates localized compressional stresses in an area over 800 km into the North American plate causing large thrusts to develop. The earth's crust seems to have fractured as a fairly rigid plate     

The Vendian record of Sr and C isotopic variations in seawater: Implications for tectonics and paleoclimate

New Sr and C isotopic data, both obtained on the same samples of marine carbonates, provide a relatively detailed record of isotopic variation in seawater through the latest Proterozoic and allow, for the first time, direct correlation of these isotopic changes in the Vendian ( 540–610 Ma). The strong isotope variations determined in this study record significant environmental and tectonic changes. Together with a fairly poorly constrained Nd isotopic record, the Sr and C isotopic records can be used to constrain rates of erosion, hydrothermal alteration and organic C burial. Further, comparison of these records with those of the Cenozoic permit investigation of the general relationship between global tectonics and continental glaciation. In particular, results of this study show a very large change in the ⁸⁷Sr/⁸⁶Sr of marine carbonates from low pre-Vendian ( > 610 Ma) values ( 0.7066) to high Middle Cambrian values ( 0.7090). This change is greater in magnitude than the significant increase in seawater ⁸⁷Sr/⁸⁶Sr through the Cenozoic. Both changes are attributed to high erosion rates associated with continent-continent collisions (Pan-African and Himalayan-Tibetan). In the latest Proterozoic these high erosion rates, probably coupled with high organic productivity and anoxic bottom-water conditions, contributed to a significant increase in the burial rate of organic C. Ice ages mark both the Neoproterozoic and Cenozoic, but different stratigraphic relationships between the Sr isotopic increase and continental glaciation indicate that uplift-driven models proposed to explain Cenozoic climatic change cannot account for the latest Proterozoic ice ages.     

Stable isotope geochemistry of acid mine drainage: Experimental oxidation of pyrite

Sulfate and water from experiments in which pyrite was oxidized at a pH of 2.0 were analyzed for sulfur and oxygen stable isotopes. Experiments were conducted under both aerobic and anaerobic sterile conditions, as well as under aerobic conditions in the presence of Thiobacillus ferrooxidans, to elucidate the pathways of oxidation. Oxygen isotope fractionation between SO^2?₄ and H₂O varied from +4.0 %. (anaerobic, sterile) to + 18.0 %. (aerobic, with T. ferrooxidans.). The oxygen isotope composition of dissolved oxygen utilized in both chemical and microbially-mediated oxidation was also determined (+11.4 %., by T. ferrooxidans; +18.4 %., chemical). Contributions of water-derived oxygen and dissolved oxygen to the sulfate produced in the oxidation of pyrite could thus be estimated. Water-derived oxygen constituted from 23 to ~ 100 percent of the oxygen in the sulfate produced in the experiments, and this closely approximates the range of contribution in natural acid mine drainage. Oxidation of sulfides in anaerobic, water-saturated environments occurs primarily by chemical oxidation pathways, whereas oxidation of sulfides in well-aerated, unsaturated zone environments occurs dominantly by microbially mediated pathways.     

A Simple Pneumatic Device and Technique for Performing Rising Water Level Slug Tests

Transmissivity can be estimated by several well documented methods employing data from rising water level slug tests in wells. A very simple and relatively inexpensive system can be constructed to lower the water level in a well. Compressed air is injected through a sealed device called a well head manifold, which screws onto the casing top and contains an air pressure gauge, an air entry valve, a quick release valve and a multi-channel water level indicator or a pressure transducer. Either of the latter is lowered into the well prior to pressurization.
Compressed air is injected into the casing at a low rate through the manifold, depressing the water level a desired amount. After stabilization, the quick release valve is opened and the air pressure inside the casing is reduced to atmospheric pressure instantaneously; the water level then starts to rise. Successive elevations of the rising water level are determined with the indicator or transducer and their elapsed times from valve opening are recorded. Plots of water level recovery vs. time can then be used to estimate transmissivity by the published methods of Cooper, Bredehoeft and Papadopulos (1967), Ferris and Knowles (1954) and Hvorslev(1951).
All of the items used for construction, with the exception of the quick release valve, can be bought off the shelf. The valve can be easily constructed in a machine shop. The total cost of the device, exclusive of the transducer, should be less than $500.     

Late‐Summer Peak in Sediment Accumulation in Two Lakes with Contrasting Watersheds,Alaska

The timing of clastic sedimentation in two glacial‐fed lakes with contrasting watersheds was monitored using sequencing sediment traps for two consecutive years at Allison Lake (Chugach Range, Alaska) and four months at Shainin Lake (Brooks Range, Alaska). Shainin Lake is a weakly stratified lake fed by distant glaciers, whereas Allison Lake is more strongly stratified and fed predominantly by proximal glaciers. At Shainin Lake, sediment accumulation started in late June and reached its maximum in mid‐August, just before lake mixing and during a period of low river discharge. The grain size of the sediment reaching the sediment trap in Shainin Lake was homogenous throughout the summer. At Allison Lake, pulsed sedimentation of coarse particles during late summer and early fall storms were superimposed on the fine‐grained sedimentation pattern similar to that observed at Shainin Lake. These storms triggered underflows that were observed in the thermal structure of the lake and deposited abundant sediment. The sequencing sediment traps reveal a lag between fluvial discharge and sediment deposition at both lakes, implying limitations to interpreting intra‐annual sedimentary features in terms of inflow discharge.     

Daily rainfall erosivity as an indicator for natural disasters: assessment in mountainous regions of southeastern Brazil

Natural Hazards - Rainfall erosivity is defined as the rainfall potential to cause erosion. Its concept is based on the kinetic energy of rainfall, rainfall intensity, and maximum rainfall...     

Results from the Huygens probe on Titan

The Cassini–Huygens mission, comprising the NASA Saturn Orbiter and the ESA Huygens Probe, arrived at Saturn in late June 2004. The Huygens probe descended under parachute in Titan’s atmosphere on 14 January 2005, 3 weeks after separation from the Orbiter. We discuss here the breakthroughs that the Huygens probe, in conjunction with the Cassini spacecraft, brought to Titan science. We review the achievements ESA’s Huygens probe put forward and the context in which it operated. The findings include new localized information on several aspects of Titan science: the atmospheric structure and chemical composition; the aerosols distribution and content; the surface morphology and composition at the probe’s landing site; the winds, the electrical properties, and the implications on the origin and evolution of the satellite.     

The bias of integrated assessment models that ignore climate catastrophes

Climate scientists currently predict there is a small but real possibility that climate change will lead to civilization threatening catastrophic events. Martin Weitzman has used this evidence along with his controversial “Dismal Theorem” to argue that integrated assessment models of climate change cannot be used to determine an optimal price for carbon dioxide. In this paper, I provide additional support for Weitzman’s conclusions by running numerical simulations to estimate risk premiums toward climate catastrophes. Compared to the assumptions found in most integrated assessment models, I incorporate into the model a more realistic range of uncertainty for both climate catastrophes and societal risk aversion. The resulting range of risk premiums indicates that the conclusions drawn from integrated assessment models that do not incorporate the potential for climate catastrophes are too imprecise to support any particular policy recommendation. The analysis of this paper is more straightforward and less technical than Weitzman’s, and therefore the conclusions should be accessible to a wider audience.     

Mineral chemistry and chemical zoning in tourmalines, Pampa del Tamboreo, San Luis, Argentina

Tourmalinites that are distally associated with tungsten deposits of the Pampa del Tamboreo area, San Luis, Argentina, contain tourmalines retaining evidence for its origin and evolution. Tourmaline grains uncommonly contain small grains of detrital tourmaline. Analysis of a single detrital tourmaline grain reveals that it is a Ca-rich “oxy-dravite”. Proximal to the detrital cores there are inner domains of asymmetric tourmaline overgrowths that developed during low grade metamorphism. Volumetrically dominant tourmaline overgrowths in the outer domain are concentrically zoned aluminous dravite and “oxy-dravite” with Al/(Al + Fe + Mg) = 0.71–0.74 and Mg/(Mg + Fe) = 0.64–0.71. Variability of Al is primarily controlled by the deprotonation substitution R + OH⁻ = Al + O²⁻ (where R = Fe + Mg), and is a function of the activity of H₂O. A likely evolutionary scenario is one in which volcanogenic material is altered by hydrothermal fluids in the sea floor resulting in an aluminous and magnesian residuum. With further hydrothermal circulation and incipient metamorphism, boron-rich fluids are expelled from metasedimentary and metavolcanic basement rocks and develop Mg-rich tourmalinites in the aluminous, magnesian host rocks. The tourmalinization process occurs over a range of metamorphic conditions and with fluids of variable activity of H₂O.     

Modelling suspended sediment discharge in a glaciated Arctic catchment–Lake Peters,Northeast Brooks Range,Alaska

Seasonal suspended sediment transfer in glaciated catchments is responsive to meteorological, geomorphological, and glacio-fluvial conditions, and thus is a useful indicator of environmental system dynamics. Knowledge of multifaceted fluvial sediment-transfer processes is limited in the Alaskan Arctic – a region sensitive to contemporary environmental change. For two glaciated sub-catchments at Lake Peters, northeast Brooks Range, Alaska, we conducted a two-year endeavour to monitor the hydrology and meteorology, and used the data to derive multiple-regression models of suspended sediment load. Statistical selection of the best models shows that incorporating meteorological or temporal explanatory variables improves performances of turbidity- and discharge-based sediment models. The resulting modelled specific suspended sediment yields to Lake Peters are: 33 (20–60) t km⁻² yr⁻¹ in 2015, and 79 (50–140) t km⁻² yr⁻¹ in 2016 (95% confidence band estimates). In contrast to previous studies in Arctic Alaska, fluvial suspended sediment transfer to Lake Peters was primarily influenced by rainfall, and secondarily influenced by temperature-driven melt processes associated with clockwise diurnal hysteresis. Despite different sub-catchment glacier coverage, specific yields were the same order of magnitude from the two primary inflows to Lake Peters, which are Carnivore Creek (128 km²; 10% glacier coverage) and Chamberlin Creek (8 km²; 23% glacier coverage). Seasonal to longer-term sediment exhaustion and/or contrasting glacier dynamics may explain the lower than expected relative specific sediment yield from the more heavily glacierized Chamberlin Creek catchment. Absolute suspended sediment yield (t yr⁻¹) from Carnivore Creek to Lake Peters was 27 times greater than from Chamberlin Creek, which we attribute to catchment size and sediment supply differences. Our results provide a foundational understanding of the current sediment transfer regime and are useful for predicting changes in fluvial sediment transport in glaciated Alaskan Arctic catchments.