Late Pleistocene vertebrate-bearing deposits at San Teodoro Cave (North-Eastern Sicily): Preliminary data on faunal diversification and chronology

This paper deals with the chronology and the possible correlations among levels of different excavated areas in the Pleistocene vertebrate-bearing deposits at the large San Teodoro Cave (North-Eastern Sicily). Two trenches have been excavated along the eastern side of the cave, located at a distance from the entrance, respectively, of 8 m (α trench) and 28 m (β trench) and at different depths. Lithological features, biometrical data from small mammals and ecological data from molluscs point to similar environmental conditions for the α trench deposits and those located along the eastern wall of the cave in the eastern part of the β trench. The same evidence, and the taphonomic features of large mammals, points to different environmental conditions and perhaps to different ages for the deposits located in the western part of the β trench. The survival of elephants in Sicily up to 32,000 years ago is a new significant result of the ²³⁰Th/²³⁴U dating carried out from a concretionary stratum from the β trench and represents the youngest elephant survival in the western Mediterranean islands.     

Fluid inclusion and stable isotope characteristics of the Karalar (Gazipaşa,Antalya) barite-galena deposits,Southern Turkey

The Karalar galena-barite deposits are typical examples of the carbonate-hosted barite-galena deposits widely occurring in the Central Tauride Belt. These deposits are located in Permian limestones as ore veins along fault zones that are discordant to the bedding planes and as thin veinlets within hardly brecciated bottom zones of Permian limestones. The ore deposits contain mainly barite and galena and small amounts of sphalerite, pyrite, fahlore, limonite, quartz, and calcite. Barites occur during the earlier episode of mineralization and were mylonitized before the formation of galena. Galena and other minerals occur epigenetically with barite along porous zones between brecciated barite crystals and are especially abundant in the hardly mylonitized zones. Fluid inclusion studies indicate that the ore deposits of the area were developed by hydrothermal fluids with following characteristics: they contained NaCl, CaCl₂, and MgCl₂; the salinity of the fluids was relatively high and their temperature was low during the crystallization of barites in the earlier episode of mineralization; and the salinity of the fluids decreased and their temperature increased during the crystallization of sulfide minerals through the later episode of mineralization. δ₁₈O and the δD results indicate that the water in the mineralizing fluid was of meteoric origin. The deposits were formed by deep meteoric water circulating through marine sediments. Shallow circulating and slightly warmed fluids dissolved Ba and sulfate from marine sediments of the basement and transported them to the mineralization environment during the early episode, while deep circulating and more heated fluids dissolved Pb, Zn, and other elements from the basement and reached the environment during the later episode of mineralization. The text was submitted by the authors in English.     

Once more on quasar periodicities

In an earlier paper Arp, Bi, Chu and Zhu investigated various quasar samples and recognized a periodicity of remarkable degree in them. Their conclusion was that the existence of such a periodicity is a counterevidence against the cosmological origin of quasar redshifts. Since this question is of great importance in a cosmological context, here we reanalyze some of the samples together with a galaxy sample of the pencil-beam survey of Broadhurstet al. Our result is that on the plane of cosmological parameters (₀, ₀) there is a non-negligible region where two quasar samples and the galaxy sample are simultaneously fairly periodic. Pure periodicity is still compatible with cosmological principles, at least on length scales much longer than the period length. So the regularities can fit into a cosmological context.     

TRANSALP—deep crustal Vibroseis and explosive seismic profiling in the Eastern Alps

The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.     

Bayesian Spatial Modelling of Gamma Ray Count Data

Gamma ray logging is a method routinely employed by geophysicists and environmental engineers in site geology evaluations. Modelling of gamma ray data from individual boreholes assists in the local identification of major lithological changes; modelling these data from a network of boreholes assists with lithological mapping and spatial stratigraphic correlation. In this paper we employ Bayesian spatial partition models to analyse gamma ray data spatially. In particular, a spatial partition is defined via a Voronoi tessellation and the mean intensity is assumed constant in each cell of the partition. The number of vertices generating the tessellation as well as the locations of vertices are assumed unknown, and uncertainty about these quantities is described via a hierarchical prior distribution. We describe the advantages of the spatial partition modelling approach in the context of smoothing gamma ray count data and describe an implementation that may be extended to the fitting of a more general model than a constant mean within each cell of the partition. As an illustration of the methodology we consider a data set collected from a network of eight boreholes, which is part of a geophysical study to assist in mapping the lithology of a site. Gamma ray logs are linked with geological information from cores and the spatial analysis of log data assists with predicting the lithology at unsampled locations.     

Damage risk assessment of breakwaters under tsunami attack

Turkey was struck by two major events on 17 August and 12 November 1999, named Izmit (M _w = 7.4) and Düzce (M _w = 7.2) earthquakes, respectively. Rubble mound breakwaters in Izmit Bay experienced little damage, as forecasted by the new risk assessment model in which tsunami occurrence risk was included in the damage estimations. In order to determine the occurrence probability of structural damage under design conditions, including the environmental loading parameters of tsunami and storm waves, tidal range and storm surge, the Conditional Expections Monte Carlo simulation was applied in the risk assessment model developed in this study for the Esenköy Fishery Harbour, Turkey. A tsunami was not the key design parameter when compared to storm waves for the main breakwater of the harbour, however, in places with great seismic activity, the tsunami risk should be important depending on the occurrence probability and magnitude of the tsunami.     

Patterns in the Turkish reinsurance claim data, 1998–2002: An application of the extreme value theory

The devastating 1999 Marmara and Düzce earthquakes led to a significant increase in the earthquake studies in Turkey in geological, engineering and financial aspects. Extreme Value Theory (EVT) has a range of applications from stock market changes to natural disasters like floods and hurricanes. Here EVT is fitted to the ordinary and earthquake reinsurance claims of Turkey.     

Back-analysis of a seismically induced highway embankment failure during the 1999 Düzce earthquake

An earthquake of magnitude 7.2 on the Richter scale occurred on 12 November 1999 in the Düzce-Bolu region of Turkey. The region was also hit approximately 3 months before during the devastating Kocaeli earthquake of 17 August 1999. Besides high casualties and damage to various engineering structures and buildings, slope and embankment failures on the highway and the country roads occurred. In this study, the authors are concerned with the back-analysis of an embankment failure that occurred on the four lanes E-5 highway connecting Ankara to Gstanbul at Bakacak in the Bolu Province during the 1999 Düzce earthquake. Both pseudo-dynamic and dynamic limiting equilibrium methods are used to back analyse the conditions for the initiation of failure and also displacement responses of the embankment during the earthquake shaking. After having given a brief summary of the investigations on the post-failure state, the geology and geotechnical characteristics of the site, and the dynamic limiting equilibrium method developed and used for analyses are described. The results of the back-analysis based on a pseudo-dynamic approach, revealed that the maximum ground acceleration to initiate the failure of the embankment was probably about 0.125 g. On the other hand, the application of a method for computing the displacement and velocity responses of the failed embankment showed that the failure was possible when the embankment was subjected to ground accelerations similar to that recorded at the Düzce station. In addition, the computations also revealed that the time history of accelerations could be very important for the failure of slopes and embankments.     

Smoothing and Change Point Detection for Gamma Ray Count Data

Gamma ray detectors are used to measure the natural radioactivity of rocks. For a number of boreholes drilled at a site the gamma ray detector is lowered into each borehole and counts of gamma ray emissions at different depths are recorded as the instrument is gradually raised to ground level. The profile of gamma counts can be informative about the geology at each location. The raw count data are highly variable, and in this paper we describe the use of adaptive smoothing techniques and change point models in order to identify changes in the geology based on the gamma logs. We formulate all our models for the data in the framework of the class of generalized linear models, and describe computational methods for Bayesian inference and model selection for generalized linear models that improve on existing techniques. Application is made to gamma ray data from the Castelreagh Waste Management Centre which served as a hazardous waste disposal facility for the Sydney region between March 1974 and August 1998. Understanding the geological structure of this site is important for further modelling the transport of pollutants beneath the waste disposal area.