Altered feeding habits and strategies of a benthic forage fish (Fundulus heteroclitus) in chronically polluted tidal salt marshes

Responses in feeding ecology of a benthic forage fish, mummichogs (Fundulus heteroclitus), to altered prey resources were investigated in chronically polluted salt marshes (the Arthur Kill-AK, New York, USA). The diet niche breadth of the AK populations of mummichogs was significantly lower than that of the reference population, reflecting reduced benthic macroinfaunal species diversity. Most of the AK populations also had 2-3 times less food in their gut than the reference population. This disparity in gut fullness among the populations appeared to be partly due to ingested prey size shifts; some of the AK populations ingested fewer large prey than the reference population. Furthermore, benthic assemblages were strongly associated with sediment-associated mercury; gut fullness of the AK populations also significantly decreased with increasing mercury body burdens. These results indicate that chronic pollution may have directly (chemical bioaccumulation) and indirectly (reduced prey availability) altered the feeding ecology of mummichogs.     

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.     

Thermodynamic modelling of sodic pyroxene solid-solution and its application in a garnet-omphacite-kyanite-coesite geothermobarometer for UHP metamorphic rocks

A garnet-omphacite-kyanite-coesite geothermobarometer is constructed to estimate the peak metamorphic pressure of ultrahigh-pressure (UHP) eclogites. For this we use a quaternary regular solution model for garnet, and propose a new model for sodic pyroxene that assumes double site solid-solution (Na,Ca)^M2(Al,Fe³⁺,Fe²⁺,Mg)^M1Si₂O₆, where cations in the M2- and the M1-sites mix randomly but with inter-site interactions, not only between nearest neighboring cations but also between next nearest neighboring cations. In the new model, overall excess interaction parameters are quantitatively deduced from the previous experimental data and critical temperature, and the activity of the jadeite component agrees reasonably with that based on the Landau theory. Furthermore, the relations of the calculated order parameter to temperature and composition are consistent with other experimental works. These facts support the usefulness of the new model. Application of our geothermobarometer to kyanite eclogite gave metamorphic conditions around 3.4 GPa and 800 ^∘C for both samples from the Dora Maira Massif, Western Alps, and from Rongcheng County, in the Su-Lu region of eastern China. Received: 30 December 1996 / Accepted: 25 August 1997     

Heavily fractionated noble gases in an acid residue from the Klein Glacier 98300 EH3 chondrite

Noble gases were measured both in bulk samples (stepped pyrolysis and total extraction) and in a HF/HCl residue (stepped pyrolysis and combustion) from the Klein Glacier (KLE) 98300 EH3 chondrite. Like the bulk meteorite and as seen in previous studies of bulk type 3 E chondrites (“sub-Q”), the acid residue contains elementally fractionated primordial noble gases. As we show here, isotopically these are like those in phase-Q of primitive meteorites, but elementally they are heavily fractionated relative to these. The observed noble gases are different from “normal” Q noble gases also with respect to release patterns, which are similar to those of Ar-rich noble gases in anhydrous carbonaceous chondrites and unequilibrated ordinary chondrites (with also similar isotopic compositions). While we cannot completely rule out a role for parent body processes such as thermal and shock metamorphism (including a later thermal event) in creating the fractionated elemental compositions, parent body processes in general seem not be able to account for the distinct release patterns from those of normal Q noble gases. The fractionated gases may have originated from ion implantation from a nebular plasma as has been suggested for other types of primordial noble gases, including Q, Ar-rich, and ureilite noble gases. With solar starting composition, the corresponding effective electron temperature is about 5000 K. This is lower than inferred for other primordial noble gases (10,000-6000 K). Thus, if ion implantation from a solar composition reservoir was a common process for the acquisition of primordial gas, electron temperatures in the early solar system must have varied spatially or temporally between 10,000 and 5000 K.Neon and xenon isotopic ratios of the residue suggest the presence of presolar silicon carbide and diamond in abundances lower than in the Qingzhen EH3 and Indarch EH4 chondrites. Parent body processes including thermal and shock metamorphism and a late thermal event also cannot be responsible for the low abundances of presolar grains. KLE 98300 may have started out with smaller amounts of presolar grains than Qingzhen and Indarch.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Observation of hydrogen peroxide concentrations in a Japanese red pine forest

In order to study the concentrations of hydrogen peroxide (H₂O₂) and the factors controlling its concentrations, we monitored concentrations of H₂O₂ and other gases such as sulfur dioxide, ozone, and NO _x as well as meteorological factors such as air temperature, relative humidity, and wind direction/speed during eight measurement periods from 2000 to 2002 in a Japanese red pine forest in Japan. The H₂O₂ concentrations ranged from below 0.01 to 1.64 ppb, and analysis of the diurnal variation in H₂O₂ concentration showed high concentrations around noon, and low concentrations in the morning and late afternoon. The H₂O₂ concentrations were high in early summer, when O₃ concentration, temperature, and solar radiation were high, and were low in fall, when O₃ concentration, temperature, and solar radiation were low. We propose that O₃ concentration affects the production of H₂O₂ in the monitored region during the period under study, but that high H₂O₂ concentrations were sometimes caused by the transport of polluted air from urban regions. H₂O₂ concentrations decreased remarkably when SO₂ concentrations increased by transported volcanic emission on Miyake Island. In the absence of the effects of SO₂, H₂O₂ concentrations increased with increasing O₃ concentration and temperature.     

Climatic consequences of gradual desertification in the semi-arid area of Northeast Brazil

The climatic impacts of gradual desertification in the semi-arid area of Northeast Brazil (SANEB) were evaluated using the MM5 regional model. Simulations for the rainy season of SANEB (March, April, and May) were performed. Desertification simulations were grouped into three numerical runs: total (all SANEB covered by desert), partial (desert areas placement based on future environmental degradation scenarios for SANEB), and random desertification (desert areas placed randomly within SANEB). Total desertification led to a pronounced and significant precipitation reduction in large parts of SANEB. Climatic impacts of partial desertification were guided by the southward expansion of desert areas. For intermediate desertification extensions, a dipole pattern with precipitation reduction (increase) in the northern (southern) areas of SANEB was found. Random desertification led to climatic impacts spread over the whole SANEB. In both partial and random desertification, a quasi-linear precipitation reduction was found as desertification extension increases.     

Standardization of baseline and additionality determination under the CDM

Clean Development Mechanism (CDM) project developers have long complained about the complexities of project-specific baseline setting and the vagaries of additionality determination. In response to this, the CDM Executive Board took bold steps towards the standardization of CDM methodologies, culminating in the approval of guidelines for the establishment of performance standards in November 2011. The guidelines specify a performance standard stringency level for both baseline and additionality of 80% for several priority sectors and 90% for all other sectors. However, an analysis of 14 large-scale CDM methodologies that use performance standard approaches challenges this top-down approach to the performance standard design. An appropriate performance standard stringency level strongly depends on sector and technology characteristics. A single stringency level for baseline and additionality determination is appropriate only for greenfield projects, but not for retrofit ones. Overly simple, highly aggregated performance standards are unlikely to ensure high environmental integrity, and difficult questions regarding stringency and updating frequency will eventually have to be addressed on a rather disaggregated level. A careful balance between data requirements and the practicability of performance standards is essential because the heavy data requirements of the existing performance standard methodologies have been the key barrier to their actual implementation.

Policy relevance

CDM regulators have been pushed by many stakeholders to standardize baseline setting and eliminate project-specific additionality determination. At first glance, performance standards seem to provide the perfect solution for both tasks. However, a one-size-fits-all political decision – e.g. the average of the top 20% performers as enshrined in the Marrakech Accords – is inappropriate. Substantial disaggregation of performance standards is required both technologically and geographically in order to limit over- and under-crediting and close loopholes for non-additional projects. As a lack of reliable and complete data has been and will be a key bottleneck for the development of performance standards, international support for data collection will be indispensable, but costly, and time-consuming. Empirically driven, techno-economic assessments of performance standard stringency levels must be the central task of the future work on standardized methodologies, and should not be sidelined by perceived needs of policy makers to take bold decisions under time pressures.