The Air Force Global Weather Central operational boundary-layer model

A limited-area seven-layer physical-numerical model for the lower tropospheric region (surface - 1600m) is described. The grid interval, approximately 190km, is half that of the standard numerical weather-prediction grid used in the hemispheric free atmospheric operational model at the Air Force Global Weather Central (AFGWC). This model is an integral part of the complete AFGWC meso-scale (sub-synoptic) numerical analysis and prediction system and is used to provide greater horizontal and vertical resolution in both numerical analyses and forecasts.Important features of this boundary-layer model include: a completely automated objective analysis of input data; the transport of heat and moisture by three-dimensional wind flow; latent heat exchange in water substance phase changes; and eddy fluxes of heat and water vapor.Input data are conventional synoptic surface and upper air reports. Other operational AFGWC prediction models provide input in the form of horizontal wind components at the upper boundary and an estimate of cloudiness above the boundary layer. Forecasts for the lower boundary and surface layer are empirically derived. Despite some approximations which broadly simplify the real planetary boundary-layer processes, operational use for highly weather-sensitive Air Weather Service support indicates that the model is capable of producing accurate detailed forecasts for periods of up to 24h.A modified version of this paper was presented at the IUGG-IAMAP-AMS conference on Planetary Boundary Layers at Boulder, Colo., 18–21 March, 1970, and at the 5th annual Congress of the Canadian Meteorological Society, at Macdonald College, 12–14 May, 1971.     

Numerical simulations of the tropical air-sea planetary boundary layer

A one-dimensional numerical model of the planetary boundary layer was used to investigate thermal and kinetic energy budgets. The simulation experiments were based on two sets of data. The first set was based on a ‘typical’ June with climatological data extracted for the oceanic region slightly northeast of Barbados. The second set used data from the third phase of project BOMEX, for approximately the same area and time of year as the first set. Comparison with observations of three simulated elements (viz., sea surface temperature and wind and humidity at 6 m) which are important in determining the near-interface energy transports shows that:

1. the model is capable of realistic simulations of both ‘typical’ conditions, and conditions for a specific four-day period;
2. the model is capable of realistically simulating the differences between prevailing values of these parameters in the two cases (‘typical’ and specific four-day period).

The simulated interface fluxes are those of incoming and outgoing short- and long-wave radiation; transmitted radiation at -0.5 m in the ocean, sensible heat transfer into the ocean and air, and latent heat flux of evaporation. Comparison with observational analyses shows that the diurnal variations in net radiation and heat storage in the mixed layer are realistically simulated. The simulated values of evaporation are consistent with other estimates for both ‘typical’ conditions and specific conditions during this four-day period. The rate of heat storage varies between +51 and -37 percent of the diurnal maximum incoming radiation, and the evaporation varies between +16% and -13% of this term. The non-dimensional transfer coefficients (C _D, C_T, C_q) computed from the model show general agreement with the coefficients calculated from observations in the simulated region (Pondet al., 1971). The simulated vertical profiles of temperature are in general agreement with observed profiles, except in the uppermost portions of the atmospheric boundary layer where deviations of approximately 1.5C occur. Simulated vertical profiles of wind speed are generally consistent with observed profiles, with the largest deviations appearing to be of the order of 0.5 m s^-1. Simulated vertical profiles of the eddy fluxes of sensible heat, water vapor, and momentum are generally consistent with Bunker's (1970) aircraft-based measurements of these quantities. The time averages of these simulated profiles show regular decreases with height, while simulated profiles for specific hours of the day show intermediate maxima and minima, which are also seen in the measured profiles. The vertically integrated kinetic energy budgets of the modelled atmospheric layer are presented through the four terms of the kinetic energy budget, viz., the upper and the lower boundary drags, dissipation, and potential-to-kinetic conversion. The dominant terms in the atmospheric energy budgets are the production and dissipation terms, with kinetic energy being exported both to the overlying atmospheric layer and to the underlying oceanic layer at rates of about 2 to 6% of the production, respectively. Comparisons between the climatological and BOMEX simulations are presented. The vertically integrated humidity budgets are presented for the two simulation experiments. Under ‘typical’ conditions, the humidity budget reveals an upper boundary flux of about +29% of the lower boundary flux with the vertically integrated advective flux being -59% of the lower flux. For the specific four-day simulation, the upper boundary flux and advection are about +28 and -70%, respectively, of the lower boundary flux.     

The Darfur Dome,western Sudan: the product of a subcontinental mantle plume

Field investigations, K-Ar age determinations and chemical data were used to describe the development of an intraplate volcanic province, the Darfur Dome, Sudan. Magmatism started 36 Ma ago at a small subvolcanic complex (Jebel Kussa) in the center of the dome and was active in the same area between 26 and 23 Ma. Two major volcanic fields (Marra Mountains and Tagabo Hills) developed between 16 and 10 Ma. Volcanism started again at 6.8 Ma with a third volcanic field (Meidob Hills) and at 4.3 Ma in the Marra Mountains and with the reactivation of the center. Activity then continued until the late Quaternary. Having started in the center of the Darfur Dome, volcanism moved in 36 Ma 200 km towards the NNE and 100 km SSW No essential difference in the alkaline magma types (basanitic to phonolitic-trachytic, with different amounts of assimilation of crustal material) in the different fields, was observed. Magmatism is thought to have been produced by a rising mantle plume and volcanism was triggered by stress resolution along the Central African Fault Zone.     

Determination of organophosphorus insecticide residues in the rice paddies

In most rice paddies in Mazandaran Province, diazinon is applied to control Chilo suppressalis. Due to the extensive application of insecticides in the rice paddies of the Caspian coasts of Iran, this investigation was carried out on the rice fields in order to obtain the necessary data and information on the concentration of insecticide residues. A total of 125 samples were taken from five areas of Amol township in 2007. Then, according to the analysis of variance procedures, the water samples were statistically analyzed after the spraying of diazinon. Results indicate that the insecticide was used frequently to control stem boring caterpillar of rice. The residuals of this toxic chemical were observed in the majority of stations from the day after the spraying until one to two months later. The greatest level of diazinon was observed in station 1 in amount of 1.14 ppm. This study revealed that the physical and chemical properties of the studied diazinon such as fumigation characteristic as well as the ecological conditions and soil type influence the reduction and eventual removal of the insecticides during the cultivation and harvest periods.     

Composition and exhalation flux of gases from mud volcanoes in Taiwan

Many mud volcanoes are distributed along the tectonic sutures in southern Taiwan and can be divided into five zones based on their relative positions in different tectonic domains. Most active mud volcanoes are exhaling methane-dominated gases. Nevertheless, some gases show unusual carbon dioxide-dominated and/or nitrogen-excess compositions. This implies that there are multiple sources for the gas compositions of mud volcanoes in Taiwan.For better understanding the total amount of exhalation gases and its flux, the gas flow and compositions were continuously measured in the interval of two minutes at Chung-lun (CL) bubbling mud pool for a few months. The major compositions of gases exhaling from this site were 75~90% of CO₂ and 5~12% of CH₄. The amount of gases exhaling from the mud pool can be estimated to be about 1.4 ton/year for CH₄ and 28 ton/year for CO₂, respectively. The preliminary results of exhaling gas flux from the major vents of representative active mud volcanoes, yielded an estimated total CH₄ output of the mud volcanoes in Taiwan of ca. 29 ton/year during quiescent period.     

Strain softening of K0-consolidated Changi sand under plane-strain conditions

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).     

Ionosphere Disturbances Preceding Earthquakes according to the Data of Ground Based Station of the Vertical Ionospheric Sounding Wakkanai

The paper analyzes the data of manual ionograms processing of hourly measurements of the critical frequency foF2 of the F2 ionospheric layer at the Wakkanai ionospheric vertical sounding station (Japan) in a geomagnetically quiet environment before a series of earthquakes with magnitude M > 6.0, for which the station entered the earthquake preparation zone, in order to detect possible Ionospheric Disturbances Preceding Earthquakes (IDPE), and to determine their quantitative characteristics. Detected IDPE, in the opinion of the authors, can be related to the processes of preparation of the corresponding earthquakes, i.e., to be Ionospheric Precursors of Earthquakes (IPE).     

Sediment waves on the Moroccan continental rise

A nearly continuous zone of sediment waves is present on the lower continental rise off western Morocco which parallels the regional bathymetric trends. The individual sediment waves within the zone migrate upslope with time and, in general, also trend parallel to the regional bathymetric contours. These observations suggest that geostrophic contour currents are responsible for the formation of sediment waves. Physical oceanographic measurements and sea-floor photographs indicate only a very weak bottom circulation in this region. This suggests either that strong bottom currents are not essential for the formation of sediment waves or that relatively stronger bottom currents flowed along the continental margin of Morocco in the recent past. Turbidity flows may also influence the distribution of these sediment waves.     

Block removal and step backwearing as erosion processes on rock shore platforms: a preliminary case study of the chalk shore platforms of south‐east England

Shore platforms frequently exhibit steps or risers facing seaward, landwards or obliquely across‐shore. A combination of soft copy photogrammetry, ortho‐rectification, geo referencing and field measurement of step height are linked in a GIS environment to measure step retreat on chalk shore platforms at sample sites in the south of England over two periods, 1973–2001, 2001–2007. The methods used allow for the identification, delineation and measurement of historic change at high spatial resolution. The results suggest that while erosion of chalk shore platforms by step backwearing is highly variable, it appears to be of similar magnitude to surface downwearing of the same platforms measured by micro‐erosion meters (MEMs) and laser scanning, in a range equivalent to 0·0006 – 0·0050 m y^?1 of surface downwearing. This equates to annual chalk volume loss from the platforms, by the two erosion processes combined, of between 0·0012 m³ m^?2 and 0·0100 m³ m^?2. Results from the more recent years' data suggests that step retreat has variability in both space and time which does not relate solely to climatic variability. The results must be viewed with caution until much larger numbers of measurements have been made of both downwearing and step erosion at higher spatial and temporal resolution. Copyright © 2010 John Wiley & Sons, Ltd.