Experimental evaluation of biases associated with sampling estuarine fishes with seines

Beach seines are widely used to estimate the density and species richness of fishes in estuaries. We evaluated the causes and extent of bias in estimates from seines using a series of field experiments in small estuaries in southern California, USA. Seining in spatially paired areas that were either enclosed by block nets or not, revealed that seines used without block nets und erestimated density by more than 4-fold and species richness by more than 2-fold relative to blocked areas. Seining in paired blocked areas with seines of two lengths revealed that net length affected estimates of density, but not species richness; a 7.6-m long seine produced 1.6-fold higher estimates of total density than did a 15.2-m long seine due to increased catches of demersal fishes, but not midwater species. Paired sampling in blocked areas also revealed that many fishes initially evaded capture by the seine. Estimates of density but not species richness were significantly higher in areas through which a seine was swept 5 times compared to once. This was due to higher catches of demersal fishes but not midwater fishes in areas seined 5 times. Repeated seining through blocked areas revealed that the vast majority (90% or more) of species and individuals of midwater fishes were captured within the first 5 sweeps, compared to only about 50% of the individuals of demersal species. A mark-recapture study in blocked areas revealed lower probabilities of capture for demersal species relative to midwater species.     

An ephemeral turbidity maximum generated by resuspension of organic-rich matter in a macrotidal estuary, S.W. Wales

An ephemeral estuarine turbidity maximum (ETM) occurs at high water in the macrotidal Taf estuary (SW Wales, United Kingdom). A new mechanism of ETM formation, due to resuspension and advection of material by flood tidal currents, is observed that differs from classical mechanisms of gravitational circulation and tidal pumping. The flood tide advances across intertidal sand flats in the main body of the estuary, progressively entraining material from the rippled sands. Resuspension creates, a turbid front that has suspended sediment concentrations (SSC) of about 4,000 mg I⁻¹ by the time it reaches its landward limit which is also the landward limit of salt penetration. This turbid body constitutes the ETM. Deposition occurs at high slack water but the ETM retains SSC values up to 800 mg I⁻¹, 1–2 orders of magnitude greater than ambient SSC values in the river and estuarine waters on either side. The ETM retreats down the estuary during the ebb; some material is deposited thinly across emergent intertidal flats and some is flushed out of the estuary. A new ETM is generated by the next flood tide. Both location and SSC of the ETM scale on Q/R³ where Q is tidal range and R is river discharge. The greatest expression of the ETM occurs when a spring tide coincides with low river discharge. It does not form during high river discharge conditions and is poorly developed on neap tides. Particles in the ETM have effective densities (120–160 kg m⁻³) that are 3–4 times less than those in the main part of the estuary at high water. High chlorophyll concentrations in the ETM suggest that flocs probably originate from biological production in the estuary, including production on the intertidal sand flats.     

Sampling characteristics and biases of enclosure traps for sampling fishes in estuaries

We evaluated the sampling characteristics of enclosure traps in estuaries in southern California, USA. Using enclosure traps that sampled 0.25, 0.5, and 1-m² footprints, we found that enclosure trap size significantly affected estimates of fish density and the precision of these estimates. The highest estimates were produced by the 0.5-m² trap and the lowest by the 0.25-m² trap. Precision of the density estimates improved with increasing trap size, while the proportion of zero values in the data sets decreased and estimates of species richness increased. The largest trap was difficult to use in the field and often did not function properly; thus we concluded that intermediate enclosure trap sizes offered the best compromise between statistical and logistical considerations. By examination of burrows in sediment cores taken in fished out enclosure traps, we found no evidence to support the widely held view that burrow-dwelling fishes evaded capture by hiding in burrows. We also used mark-recapture techniques to estimate recovery efficiency in 0.43-m² enclosure traps. Recovery efficiency averaged 91% and did not differ significantly among estuaries or sampling stations within estuaries. Based on extensive netting within enclosure traps, we determined that in areas with dense fish populations (>90 fish 0.43-m⁻²), netting could be ceased after the first sweep that captured no fish with only a trivial effect on the estimate of density. In more sparsely populated areas, netting had to continue until 2–3 sweeps had captured no fish in order to obtain estimates of density that were within 90% of the actual values present. Overall, we found enclosure traps to be effective tools for sampling small, abundant fishes in shallow estuaries in southern California, but we recommend that care be taken when choosing trap size and sampling (netting) effort within traps in order to optimize their sampling characteristics.     

Effects of Hurricane Ivan on water quality in Pensacola Bay, Florida

Pensacola Bay, Florida, was in the strong northeast quadrant of Hurricane Ivan when it made landfall on September 16, 2004 as a category 3 hurricane on the Saffir-Simpson scale. We present data describing the timeline and maximum height of the storm surge, the extent of flooding of coastal land, and the magnitude of the freshwater inflow pulse that followed the storm. We computed the magnitude of tidal flushing associated with the surge using a tidal prism model. We also evaluated hurricane effects on water quality using water quality surveys conducted 20 and 50 d after the storm, which we compared with a survey 14 d before landfall. We evaluated the scale of hurricane effects relative to normal variability using a 5-yr monthly record. Ivan's 3.5 m storm surge inundated 165 km² of land, increasing the surface area of Pensacola Bay by 50% and its volume by 230%. The model suggests that 60% of the Bay's volume was flushed, initially increasing the average salinity of Bay waters from 23 to 30 and lowering nutrient and chlorophylla concentrations. Additional computations suggest that wind forcing was sufficient to completely mix the water column during the storm. Freshwater discharge from the largest river increased twentyfold during the subsequent 4 d, stimulating a modest phytoplankton bloom (chlorophyll up to 18 μg l⁻¹) and maintaining hypoxia for several months. Although the immediate physical perturbation was extreme, the water quality effects that persisted beyond the first several days were within the normal range of variability for this system. In terms of water quality and phytoplankton productivity effects, this ecosystem appears to be quite resilient in the face of a severe hurricane effect.     

Comparative study of sampling methods and in situ and laboratory analysis for shallow-water submarine hydrothermal systems

A primary aim for sampling of submarine hydrothermal vents is to minimize inclusion of ambient seawater. Here, we compare the results of three different sampling methods (air displacement, two-valve bottle, and syringes) for shallow submarine systems. Mixing of hydrothermal fluid with seawater is unavoidable; however, calculations based on linear mixing models allow estimation of the hydrothermal fluid end-member composition. The results show that sampling with a two-valve bottle and syringes are the best options because they allow collection of samples with a large proportion of hydrothermal fluid. Additionally, we compare the results of in situ and laboratory analyses of the fluid samples, and demonstrate that determination of chemical composition in situ is the best option for some components, as re-equilibration affects some component concentrations (i.e. bicarbonate). Conversely, silica determination in situ usually underestimates the concentration in the fluid, as it does not account for polymeric silica. Other components can be measured either in the field or in the laboratory.     

Temperature–composition–time (T–X–t) data from authigenic K-feldspar: An integrated methodology for dating fluid flow events

Integration of fluid inclusion analysis with high spatial resolution Ar–Ar dating of K-feldspar cements has been used to resolve and reconstruct palaeo-fluid flow. Fluid inclusion analysis allows discrimination of distinct cement phases, thereby identifying discrete episodes of fluid flow. Ar–Ar dating of the same cements via high spatial resolution laserprobe establishes absolute age constraints on the framework previously constructed. Integration of these two datasets yields temperature–composition–time data.     

Composition and applied sedimentology of salt from brines of the Mamfe Basin, Cameroon

Salts produced using brines of the Mamfe Basin were analysed by XRD for their mineral composition and ICP-MS for minor element composition. Halite (NaCl) and dolomite (CaMg (CO₃)₂) constitute the major minerals with minor impurities from Mo and Cd in the chlorides and Sc and Cu in the carbonates. The mineral composition is evidence of dissolution of evaporites with parent brine of marine origin. Other elements analysed are suggested to be adsorbed to these salts and result from water–rock interaction. The elements partitioned based on their correlation to other elements are suggested to derive from sulphates including barite for Ba, sulphides for Pb, Zn, silicates for Zr, Mn and oxides for V, Cr. The electrical conductance of the brines is related to the salt yield by the equation; M = 9 × 10^− 4E− 3.27, and it can be used to estimate salt yield throughout the year. Over 1200 tons of salt consisting dominantly of grade I halite are lost annually as brines across the basin. Purification is required for some minor elements including Ba, Pb, Hg and Cd for use as a condiment. A genetic relation between the parent brine, sulphide minerals and organic matter-rich sediments is proposed.     

Stable isotope evidence for the atmospheric origin of CO2 involved in carbonation of MSWI bottom ash

Stable isotopes were used to constrain the origin of CO₂ involved in the ageing process of municipal solid waste incineration (MSWI) bottom ash under open-air conditions. The δ¹³C and δ¹⁸O values of CaCO₃ occurring in MSWI bottom ash samples of variable age and the δ¹³C of the residual organic matter content were measured, and laboratory assessments made of the isotopic fractionation accompanying CaCO₃ neo-formation during accelerated carbonation experiments of bottom ash or pure lime with atmospheric or industrial CO₂. The results indicate that stable isotopic compositions exhibited by fresh and aged bottom ash samples reflect non-equilibrium processes resembling those described in the carbonation of concrete and mortar. They also lead to conclusions on the prevalent involvement of atmospheric CO₂ in the open-air carbonation of MSWI bottom ash.     

The bimodal rift-related Juscelândia volcanosedimentary sequence in central Brazil: Mesoproterozoic extension and Neoproterozoic metamorphism

The Barro Alto Complex and Juscelândia volcanosedimentary sequence are exposed in the central part of the Neoproterozoic Brasília belt of central Brazil. The former is a large (approximately 150 km long), boomerang-shaped, mafic-ultramafic, layered complex formed by two different intrusions metamorphosed under granulite facies. These rocks are tectonically overlain by rocks of the Juscelândia volcanosedimentary sequence, represented mainly by biotite-gneiss and amphibolite, or amphibolite facies metamorphic equivalents of rhyolite and basalt, respectively. New SIMS U–Pb zircon data and Sm–Nd isochron data presented herein help clarify the igneous and metamorphic evolution of the Juscelândia volcanosedimentary sequence, as well as its relationship with the Barro Alto Complex. Zircon grains from two biotite gneisses were analyzed by SIMS (SHRIMP) and indicate Mesoproterozoic dates, approximately 1.28 Ga, interpreted as the time of bimodal volcanism in a tectonic setting transitional between a continental rift and an ocean basin. Metamorphism is constrained by Sm–Nd garnet-whole-rock isochrons for garnet amphibolite and pelitic schists of the Juscelândia sequence, as well as for clinopyroxene-garnet amphibolite and garnet granulite of the Barro Alto Complex, which give ages between 0.74 and 0.76 Ga, in agreement with SIMS dates for metamorphic zircon rims. These new data are significant, because they establish that a single metamorphic event affected both the Barro Alto Complex and the Juscelândia sequence. Based on these new data, we present a modified tectonic model for the Brasília belt.