Orion: A 1–5 Micron Focal Plane for the 21st Century

The Orion program is a project to develop a 2K × 2K infrared focal plane using InSb p-on-n diodes for detectors. It is the natural follow-up to the successful Aladdin 1K × 1K program started in the early 90's. The work is being done at the Raytheon Infrared Operations Division (RIO, previously known as the Santa Barbara Research Center) by many of the same people who created the Aladdin focal plane. The design is very similar to the successful Aladdin design with the addition of reference pixels, whole array readout (no quadrants), two-adjacent-side buttability, and a packaging design that includes going directly to the ultimate focal plane size of 4K × 4K. So far we have successfully made a limited number of hybrid modules with InSb detectors. In this paper we will describe the design features and test data taken from some of these devices. This revised version was published online in July 2006 with corrections to the Cover Date.     

Observations of the birth of a small coronal hole

Using soft X-ray data from the S-054 X-ray spectrographic telescope aboard Skylab, we observed temporal changes in the emission structure of the X-ray corona associated with the birth of a small coronal hole. Designated as CH6, this coronal hole was born near the equator in a time interval less than 9 1/2 hr. By constructing a light curve for a point near the center of CH6, we observed a sudden 40% decrease in X-ray emission associated with the birth of this coronal hole. On a time scale of hours, the growth of CH6 in area proceeded faster than the average rate predicted by the diffusion of solar fields. The short term decay of CH6 followed the diffusive rate to within experimental uncertainty, On a time scale of one rotation, the subsequent development of CH6 was not consistent with steady growth at the average rate predicted by diffusion.Skylab Solar Workshop Post-Doctoral Appointee, 1975–1977. The Skylab Solar Workshops are sponsored by NASA and NSF and managed by the High Altitude Observatory, National Center for Atmospheric Research.     

The 14-year Performance of a Compacted Clay Liner used as Part of a Composite Liner System for a Leachate Lagoon

The migration of contaminants through a 2.9 m thick compacted clay liner (CCL) for a landfill leachate lagoon is examined 14 years after construction. The clay liner formed the lower portion of the composite liner system but the geomembrane (GM) was found to have defects that had allowed leachate to migrate between the GM and CCL. Chloride, sodium, potassium, calcium and magnesium pore water profiles through the CCL are examined. It is shown that chloride migrated approximately 1.7 m into the CCL during the 14 years of the lagoon operation, sodium approximately 1.2 m, and potassium 0.7 m. Diffusion and sorption data from laboratory diffusion testing are utilized in combination with a finite layer contaminant transport model to predict field contaminant migration profiles through the composite liner system and to establish the time of ‘failure’ of the geomembrane at sometime between 0 and 6 years after installation. Relatively high sorptive uptake of potassium by the CCL soil is observed from batch testing and diffusion testing with field data suggesting an even larger amount of sorption. It is hypothesized that organic sludge matter at the base of the lagoon is responsible for potassium uptake from the leachate. This field case highlights the importance of the compacted clay liner as part of the composite liner system in acting as a diffusion barrier during the lifetime of the lagoon as well as using relatively non-conservative contaminants such as chloride and sodium to estimate geomembrane ‘failure’ times     

Multiscale characterization of a heterogeneous aquifer using an ASR operation

Heterogeneity in the physical properties of an aquifer can significantly affect the viability of aquifer storage and recovery (ASR) by reducing the recoverable proportion of low-salinity water where the ambient ground water is brackish or saline. This study investigated the relationship between knowledge of heterogeneity and predictions of solute transport and recovery efficiency by combining permeability and ASR-based tracer testing with modeling. Multiscale permeability testing of a sandy limestone aquifer at an ASR trial site showed that small-scale core data give lower-bound estimates of aquifer hydraulic conductivity (K), intermediate-scale downhole flowmeter data offer valuable information on variations in K with depth, and large-scale pumping test data provide an integrated measure of the effective K that is useful to constrain ground water models. Chloride breakthrough and thermal profiling data measured during two cycles of ASR showed that the movement of injected water is predominantly within two stratigraphic layers identified from the flowmeter data. The behavior of the injectant was reasonably well simulated with a four-layer numerical model that required minimal calibration. Verification in the second cycle achieved acceptable results given the model's simplicity. Without accounting for the aquifer's layered structure, high precision could be achieved on either piezometer breakthrough or recovered water quality, but not both. This study demonstrates the merit of an integrated approach to characterizing aquifers targeted for ASR.     

Constraining models of the tectonic setting of the giant Olympic Dam iron oxide–copper–gold deposit, South Australia, using deep seismic reflection data

In the Gawler Craton, the completeness of cover concealing the crystalline basement in the region of the giant Olympic Dam Cu–Au deposit has impeded any sufficient understanding of the crustal architecture and tectonic setting of its IOCG mineral-system. To circumvent this problem, deep seismic reflection data were recently acquired from  250 line-km of two intersecting traverses, centered on the Olympic Dam deposit. The data were recorded to 18 s TWT ( 55 km). The crust consists of Neoproterozoic cover, in places more than 5 km thick, over crystalline basement with the Moho at depths of 13–14 s TWT ( 40–42 km). The Olympic Dam deposit lies on the boundary between two distinct pieces of crust, one interpreted as the Archean–Paleoproterozoic core to the craton, the other as a Meso–Neoproterozoic mobile belt. The host to the deposit, a member of the  1590 Ma Hiltaba Suite of granites, is situated above a zone of reduced impedance contrast in the lower crust, which we interpret to be source-region for its  1000 °C magma. The crystalline basement is dominated by thrusts. This contrasts with widely held models for the tectonic setting of Olympic Dam, which predict extension associated with heat from the mantle producing the high temperatures required to generate the Hiltaba Suite granites implicated in mineralization. We use the seismic data to test four hypotheses for this heat-source: mantle underplating, a mantle-plume, lithospheric extension, and radioactive heating in the lower crust. We reject the first three hypotheses. The data cannot be used to reject or confirm the fourth hypothesis.     

Miocene shelf‐edge deltas and their impact on deepwater slope progradation and morphology,Northwest Shelf of Australia

Late‐middle Miocene to Pliocene siliciclastics in the Northern Carnarvon Basin, Northwest Shelf of Australia, are interpreted as having been deposited by deltas. Some delta lobes deposited sediments near and at the shelf break (shelf‐edge deltas), whereas other lobes did not reach the coeval shelf break before retreating landward or being abandoned. Shelf‐margin mapview morphology changes from linear to convex‐outward in the northern part of the study area where shelf‐edge deltas were focused. Location and character of shelf‐edge deltas also had significant impact on along‐strike variability of margin progradation and shelf‐edge trajectory. Total late‐middle and late Miocene margin progradation is ca. 13 km in the south, where there were no shelf‐edge deltas, vs. ca. 34 km in the north where shelf‐edge deltas were concentrated. In the central area, the deltas were arrested and accumulated a few kilometres landward of the shelf break, resulting in an aggradational shelf‐edge trajectory, in contrast to the more progradational trajectory farther north. This illustrates a potential limitation of shelf‐edge trajectory analysis: only where shelf‐edge deltas occur, there is sufficient sediment available for the shelf‐edge trajectory to record relative sea‐level fluctuations reliably. Small‐scale (ca. 400 m wide) incisions were already conspicuous on the coeval slope even before deltas reached the shelf break. However, slope gullies immediately downdip from active shelf‐edge deltas display greater erosion of underlying strata and are wider and deeper (>1 km wide, ca. 100 m deep) than coeval incisions that are laterally offset from the deltaic depocenter (ca. 0.7 km wide, ca. 25 m deep). We interpret this change in slope‐gully dimensions as the result of greater erosion by sediment gravity flows sourced from the immediately adjacent shelf‐edge deltas. Similarly, gullies also incised further (up to 6 km) into the outer shelf in the region of active shelf‐edge deltas.     

Numerical Simulations of the Impacts of Land-Cover Change on a Southern Sea Breeze in South-West Western Australia

A sea-breeze event in south-west Western Australia is simulated using the Regional Atmospheric Modelling System (RAMS) version 6.0. The model is evaluated against high resolution soundings as well as station observations and is shown to reproduce the qualitative features of the sea breeze well. Sensitivity tests are carried out to investigate the effects of historical land-cover change and changes in soil moisture on the dynamics of the sea breeze. It is found that land-cover change alone, i.e., a change from wooded grasslands to bare soil, with no change in soil moisture initialisation, does not significantly alter the overall structure of the sea breeze but results in higher surface winds due to the reduced vegetation roughness length, which leads to enhanced surface moisture advection inland. On the other hand, land-cover change in conjunction with increased soil moisture results in a considerably weaker, shallower, and less penetrative sea breeze, and delays its onset and duration. A sea-breeze scaling analysis highlights the impact of increasing soil moisture on reducing the sea-breeze volume flux scale.     

Laboratory experiments on the weathering of iron meteorites and carbonaceous chondrites by iron‐oxidizing bacteria

Abstract— Batch culture experiments were performed to investigate the weathering of meteoritic material by iron‐oxidizing bacteria. The aerobic, acidophilic iron oxidizer (A. ferrooxidans) was capable of oxidizing iron from both carbonaceous chondrites (Murchison and Cold Bokkeveld) and iron meteorites (York and Casas Grandes). Preliminary iron isotope results clearly show contrasted iron pathways during oxidation with and without bacteria suggesting that a biological role in meteorite weathering could be distinguished isotopically. Anaerobic iron‐oxidizers growing under pH‐neutral conditions oxidized iron from iron meteorites. These results show that rapid biologically‐mediated alteration of extraterrestrial materials can occur in both aerobic and anaerobic environments. These results also demonstrate that iron can act as a source of energy for microorganisms from both iron and carbonaceous chondrites in aerobic and anaerobic conditions with implications for life on the early Earth and the possible use of microorganisms to extract minerals from asteroidal material.     

Microbial activity and chemical weathering in the Middendorf aquifer,South Carolina

We use reactive transport modeling to better understand the kinetics of chemical weathering in the Cretaceous Middendorf aquifer of South Carolina, USA, and the relationship of this process to subsurface microbial activity. We constructed a model accounting for the kinetics of mineral dissolution and precipitation, ion exchange, and the CO₂ and bicarbonate produced by iron reducing and sulfate reducing bacteria in the aquifer. We then fit the model to observed trends in the chemical composition of groundwater along the aquifer by adjusting the rate constants for the kinetic reactions considered. The modeling portrays weathering in the Middendorf as a slow process by which groundwater gradually reacts toward equilibrium with minerals in the aquifer. The rate constants predicted are 6 to 7 orders of magnitude smaller than measured in laboratory experiments and 3 to 4 orders of magnitude less than those inferred from weathering rates in soils. The rate constants are smaller even than expected by projecting observed trends with the duration of weathering to the geologic age of the Middendorf. Weathering is driven largely by biological activity: about half the acid consumed is CO₂ derived from the recharge area, and about half is supplied by iron reducing bacteria in the aquifer; only about 1% of the acid is of atmospheric origin, from CO₂ dissolved in rainwater.