Textural characteristics of sediments along the southern Red Sea coastal areas,Saudi Arabia

A lack of understanding exists of the origin and textural characteristics of Saudi Arabian Red Sea coastal sediments. This paper concerns the southern coastline of Jizan on the Saudi Red Sea. It is some 160 km long characterised by either narrow rocky headlands with intermittent pocket beaches or wide low-lying beaches dissected by wadis. Granulometric testing of samples from 135 locations showed that beach sand size was mainly very fine to medium grained (M _z = 3.93 Ø), sorting ranged from 1.65 to 0.41 and skewness values from ?051 to 0.39, being mainly negative; dune sands were medium to fine grained (M _z = 1.13 Ø; average sorting 2.8), while skewness variations within dune samples indicated symmetrical to fine skewed values (б _Ι = 0.55 to 0.89). Most foreshore samples were derived from wadis. Wadi mud levels can be high, e.g. Baysh (84%), and wadi Samrah (90%) with mean grain size ranging from very fine to medium sand (M _z = 3.9 Ø), sorting being well to poor (0.45 to 1.52) due to sediment influxes. Sabkha had a wide range of sand/mud and significantly higher carbonate percentages than other environments. Sediment source differences and littoral reworking contributed to grain size variation. The carbonate content varied between 1.5 and 31.5% due to hinterland contributions, and spatial analysis showed increasing quantities of carbonate minerals towards the south. On the wider geographical front, findings from Jizan are similar to those of the Northern United Arab Emirates (UAE), including sabkhas, being composed of sand, skeletal carbonate, fine fluvial material and wind-blown silt and clay components of wadi origin. Further work on the northeastern Red Sea edge can hopefully confirm these findings.     

Platinum and palladium mobility in supergene environment: The residual origin of the Pirogues River mineralization, New Caledonia

Eluvial concentration of platinum-group minerals (PGM) has developed in the south of New Caledonia, from the weathering of a mafic and ultramafic cumulate. The platinum/palladium (Pt/Pd) ratio evolution from the bottom to the top of the weathering profile indicates a chemical mobilization of Pd in supergene environment. The examination by scanning electron microscopy of the residual PGM collected in the weathering profile and their chemical characterization by electronic microprobe show a preservation of the structure and chemical signature (in the core of the grains) of the fresh PGM. This clearly demonstrates that the PGM studied here are residual and are affected by dissolution process.     

Origin of crystalline,cold desert salts in the McMurdo region,Antarctica

The distribution of crystalline salt minerals in deposits in the McMurdo region of Antarctica has been examined to study the origin of these salts. Sulphate, chloride, sodium and calcium salts are most frequently encountered. Salts containing chloride and sodium ions become less common away from the coast. Sulphate salts are more regularly distributed but tend to be related isotopically to sea water sulphate. Salts containing magnesium ion tend to exist mainly on substrates composed of basic igneous rocks, whereas calcium and carbonate salts are present on all rock types in the region.These distributions show that salts of marine origin are regionally and quantitatively most important but that chemical weathering of mafic materials in rocks and soils is also significant. However, biological, volcanic and hydrothermal processes are or have been active contributing to salts in local areas, that include penguin rookeries and eastern Taylor Valley, the summit area of Erebus Volcano, and subsurface rocks, respectively.     

The behaviour of dissolved organic material,iron and manganese in estuarine mixing

Fractionation by ultra-filtration of the dissolved organic material (DOM) in the River Beaulieu, with typical concentrations of dissolved organic carbon (DOC) of 7–8 mg C/l, showed it to be mainly in the nominal molecular weight range of 10³–10⁵, with 16–23% of the total DOC in the fraction > 10⁵. The molecular weight distribution of DOM in the more alkaline River Test (average DOC, 2 mg C/l) was similar. In the River Beaulieu water, containing 136–314 βg Fe/l in ‘dissolved’ forms, 90% or more of this Fe was in the nominal molecular weight fraction > 10⁵. Experiments showed that DOM of nominal molecular weight <10⁵ could stabilize Fe(III) in ‘dissolved’ forms. The concentrations of ‘dissolved’ Fe in the river water probably reflect the presence of colloidal Fe stabilized by organic material and this process may influence the apparent molecular weight of the DOM. Dissolved. Mn (100–136 βg/l) in the River Beaulieu was mainly in true solution, probably as Mn(II), with some 30% in forms of molecular weight greater than ca 10⁴.During mi xing in the Beaulieu Estuary, DOC and dissolved Mn behave essentially conservatively. This contrasts with the removal of a large fraction of the dissolved Fe (Holliday and LISS, 1976, Est. Coastal Mar. Sci. 4, 349–353). Concentrations of lattice-held Fe and Mn in suspended particulate material were essentially uniform in the estuary, at 3.2 and 0.012%, respectively, whereas the non-lattice held fractions decreased markedly with increase in salinity. For Mn the decrease was linear and could be most simply accounted for by the physical mixing of riverborne and marine participates, although the possibility that some desorption occurs is not excluded. The non-linear decrease in the concentration of non-lattice held Fe in particulates reflected the more complex situation in which physical mixing is accompanied by removal of material from the ‘dissolved’ fraction.     

Production of acid water in a lead-zinc mine,Coeur d'Alene,Idaho

The Bunker Hill Mine in Idaho's Coeur d'Alene mining district produces approximately 10 m³/minute of acid water containing high concentrations of heavy metals. Field and laboratory studies indicate that much of the acid water is produced in a single ore body in the upper part of the mine. The ore of this body contains mainly sphalerite, galena, and pyrite in a siderite-quartz gangue. Ground water recharges this ore body through a near-vertical zone of high permeability, which is the result of mining by the caving technique. Ore samples from the caving area contained oxidized forms of iron and produced acid in a laboratory leaching test. Leaching experiments with several ore samples from the mine also indicated that the ratio of pyrite to calcite in the samples strongly controlled the resultant pH values. Oxidation of pyrite to sulfuric acid and compounds of iron is apparently responsible for the production of acid water in the mine. In contrast, dissolution of calcite in water results in a basic solution, with pH around 8.3, that can neutralize the acid produced by the oxidation process. Methods for prevention of acid mine drainage in this and other similar mines are noted.     

Geology ‘far from the madding crowd’, along the northern border of Vietnam

To the north of Hanoi, about a day's drive by car, lies Ha Giang Province, the northernmost region of Vietnam. Ha Giang is remote from the hustle and bustle of daily life, and beyond its eponymous provincial capital towards the border with China, mountains rise quickly to Quan Ba, ‘Heaven's Gate’. The mountains form an uneven landscape of steep‐sided karst rising from deep river‐cut gorges and form a formidable barrier on the northern frontier of Vietnam. Beyond ‘Heaven's Gate’ lies the little travelled region of Dong Van, with its majestic mountains of Palaeozoic strata rising precipitously to the sky. Here, a century ago, the French geologists Henri Mansuy and Jacques Deprat documented early finds of fossils from lower Palaeozoic strata on the border with China.     

The breakdown of potassium feldspar at high water pressures

The equilibrium position of the reaction between sanidine and water to form “sanidine hydrate” has been determined by reversal experiments on well characterised synthetic starting materials in a piston cylinder apparatus. The reaction was found to lie between four reversed brackets of 2.35 and 2.50 GPa at 450 °C, 2.40 and 2.59 GPa at 550 °C, 2.67 and 2.74 GPa at 650 °C, and 2.70 and 2.72 GPa at 680 °C. Infrared spectroscopy showed that the dominant water species in sanidine hydrate was structural H₂O. The minimum quantity of this structural H₂O, measured by thermogravimetric analysis, varied between 4.42 and 5.85 wt% over the pressure range of 2.7 to 3.2 GPa and the temperature range of 450 to 680 °C. Systematic variation in water content with pressure and temperature was not clearly established. The maximum value was below 6.07 wt%, the equivalent of 1 molecule of H₂O per formula unit. The water could be removed entirely by heating at atmospheric pressure to produce a metastable, anhydrous, hexagonal KAlSi₃O₈ phase (“hexasanidine”) implying that the structural H₂O content of sanidine hydrate can vary. The unit cell parameters for sanidine hydrate, measured by powder X-ray diffraction, were a = 0.53366 (±0.00022) nm and c = 0.77141 (±0.00052) nm, and those for hexasanidine were a = 0.52893 (±0.00016) nm and c = 0.78185 (±0.00036) nm. The behaviour and properties of sanidine hydrate appear to be analogous to those of the hydrate phase cymrite in the equivalent barium system. The occurrence of sanidine hydrate in the Earth would be limited to high pressure but very low temperature conditions and hence it could be a potential reservoir for water in cold subduction zones. However, sanidine hydrate would probably be constrained to granitic rock compositions at these pressures and temperatures. Received: 6 May 1997 / Accepted: 2 October 1997     

Investigating the Effect of Cyclic Loading on the Indirect Tensile Strength of Rocks

This paper presents the results of laboratory experiments during the investigation of the stress–strain characteristics of Brisbane tuff disc specimens under diametral compressive cyclic loading. Two different cyclic loading methods were used: namely, sinusoidal cyclic loading and cyclic loading with increasing mean level. The first method applied the S–N curve approach to the indirect tensile strength (ITS) of rock specimens for the first time in the literature, and the second method investigated the effect of increasing cyclic loading on the ITS of rock specimens. The ITS of Brisbane tuff disc specimens was measured using the Brazilian tensile strength test. The reduction in ITS was found to be 33% with sinusoidal loading tests, whereas increasing cyclic loading caused a maximum reduction of 37%. It is believed that the fracturing under cyclic loading starts at contact points between strong grains and weak matrices, and that contact points at grain boundaries are the regions of stress concentration (i.e., indenters). Transgranular cracks emanate from these regions and intergranular cracks sometimes pass through the contact points. Once cracking begins, there is a steady progression of damage and a general ‘loosening’ of the rock, which is a precursor to the formation of intergranular cracks.     

Trimlines,blockfields and the vertical extent of the last ice sheet in southern Ireland

Trimlines separating glacially abraded lower slopes from blockfield‐covered summits on Irish mountains have traditionally been interpreted as representing the upper limit of the last ice sheet during the Last Glacial Maximum (LGM). Cosmogenic ¹⁰Be exposure ages obtained for samples from glacially deposited perched boulders resting on blockfield debris on the summit area of Slievenamon (721 m a.s.l.) in southern Ireland demonstrate emplacement by the last Irish Ice Sheet (IIS), implying preservation of the blockfield under cold‐based ice during the LGM, and supporting the view that trimlines throughout the British Isles represent former englacial thermal regime boundaries between a lower zone of warm‐based sliding ice and an upper zone of cold‐based ice. The youngest exposure age (22.6±1.1 or 21.0±0.9 ka, depending on the ¹⁰Be production rate employed) is statistically indistinguishable from the mean age (23.4±1.2 or 21.8±0.9 ka) obtained for two samples from ice‐abraded bedrock at high ground on Blackstairs Mountain, 51 km to the east, and with published cosmogenic ³⁶Cl ages. Collectively, these ages imply (i) early (24–21 ka) thinning of the last IIS and emergence of high ground in SE Ireland; (ii) relatively brief (1–3 ka) glacial occupation of southernmost Ireland during the LGM; (iii) decoupling of the Irish Sea Ice Stream and ice from the Irish midlands within a similar time frame; and (iv) that the southern fringe of Ireland was deglaciated before western and northern Ireland.