Velocities of compressional and shear waves in limestones

Carbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional‐ and shear‐wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse‐echo method. The measurements were made both in vacuum‐dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin‐impregnated polished thin sections, X‐ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional‐ and shear‐wave velocities (V_p and V_s, respectively) decrease with increasing porosity and that V_p decreases approximately twice as fast as V_s. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore‐structure‐dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot–Gassmann velocity values are greater than the measured velocity values due to the rock–fluid interaction. This is not accounted for in the Biot–Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time‐average relationships overestimated the measured velocities even more than the Biot model.     

Preliminary considerations on the potential influence of submarine fans on marine delimitation

The complex issues associated with marine delineation for the outer limit of continental shelf and the boundary delimitation have provoked considerable attention among researchers in a variety of academic circles, particularly in the juristic filed and the geo-science field. In the present contribution, we start from an overview of submarine fans, as one of common types of sediment-deposit bodies in the ocean, and ex- plore the related geological features which may be of relevance to the marine delimitation in accordance with the 1982 United Nations Convention on the Law of the Sea. We carry out a comparative assessment of certain significant geological features of submarine fans, using the Bengal fan as an example, which is the biggest submarine fan in the world and represents an important factor in the maritime boundary dispute between the neighboring states currently. The relationship between the special geological bodies and the international principle in the 1982 United Nations Convention can be established by combining geological and juristic analyses. This preliminary observation on the effect of submarine bodies both on the marine entitlement and boundary delimitation indicates that it is important for the international society to appro- priately deal with this problem so that the marine right of any state can be protected.     

An Operational Application of Automatic Feature Extraction: The Measurement of Cracks in Concrete Structures

An understanding of the evolution of cracks in concrete structures due to long term natural deformation is important to civil engineers, but quantitative measurements can be difficult to make. However, digital imaging offers a potential solution. This short paper illustrates the operational application of automated image processing techniques for accurate, multi-temporal crack measurements. The first part of this paper provides an overview of automatic feature extraction, essential for automatic crack detection. The latter part describes the methods developed for detecting and measuring cracks. Due to the long term nature of the application, operational results have yet to be finalised, although sample results are presented     

Controls on supergene enrichment of porphyry copper deposits in the Central Andes: A review and discussion

The Central Andes host some of the world’s largest porphyry copper deposits. The economic viability of these deposits is dependent on the size and quality of their supergene enrichment blanket. Published models that have strongly influenced exploration policy suggest that supergene enrichment ceased at 14 Ma due to an increase in aridity. Here we discuss these models using published geochronological, geomorphological and geological data. Geochronological data indicate that supergene oxidation and enrichment has been active between 17 and 27°S across the forearc of northern Chile and southern Peru from 44 to 6 Ma, and on the Bolivian Altiplano and Eastern Cordillera of Argentina from 11 Ma to present. There is evidence for cessation at 20, 14 and 6 Ma. However, a major problem is that as more geochronological data become available the age ranges and periods of enrichment increase. This suggests that the full spectrum of enrichment ages may not have been sampled. The relationship between supergene enrichment and the age of regional pediplain surface development is not well constrained. Only in two areas have surfaces related to enrichment been directly dated (southern Peru and south of 26°S in Chile) and suggest formation post 14 Ma. Sedimentological data indicate that a fluctuating arid/semi-arid climate prevailed across the Atacama Desert until between 4 and 3 Ma, climatic conditions that are thought to be favourable for supergene enrichment. The balance between uplift, erosion, burial and sufficient water supply to promote enrichment is complex. This suggests that a simple model for controlling supergene enrichment is unlikely to be widely applicable in northern Chile. General models that involve climatic desiccation at 14 Ma related to rainshadow development and/or the presence of an ancestral cold-upwelling Humboldt Current are not supported by the available geological evidence. The integration of disparate sedimentological, geomorphological and supergene age data will be required to fully understand the controls on and distribution of supergene oxidation and enrichment in the Central Andes.     

A preliminary Ordovician biostratigraphy of Tasmania

In Tasmania sedimentary rocks containing shelly fossils at many horizons, some graptolitic horizons and numerous conodont horizons were deposited, apparently continuously, from the Tremadoc Epoch into and after the Llandovery Epoch. Superposition can be demonstrated over this interval so that the position of preserved faunas or biotas relative to one another is clear in most cases. Twenty successive Ordovician faunas are recognized. During the interval represented by this succession the geographical affinities of the faunas were generally with eastern Asian, North American and South American faunas, but in the later part of the Ordovician and in the Silurian the affinities were wider. Because of the clarity of the succession, the duration of deposition and relationships of the faunas, the Tasmanian succession is likely to be a useful link in world correlation, especially for isolated areas such as parts of South America and southeastern Asia.     

Structural controls and genesis of epithermal gold-bearing breccias at the Lebong Tandai mine, Western Sumatra, Indonesia

Lebong Tandai is a low-sulphidation, volcanic-hosted epithermal gold deposit of Neogene age, located within the foothills of the Barisan Mountains, Sumatra. To date, the mine has produced approximately 40 tonnes of gold and 400 tonnes of silver. The mineralisation is exclusively in the form of tabular quartz-cemented breccias bodies which are localised along faults. The breccias comprise angular to sub-rounded clasts of the wallrocks and earlier barren breccias cemented by banded or massive quartz, and in many instances, the clasts are supported within the quartz cement.The sulphide minerals occur as either a single cockade band around the clasts in the breccia, or as polymineralic aggregates disseminated throughout the breccia cement. The main precious-metal-bearing phase is electrum, with silver-sulphosalts and silver-tellurides also present. Highly variable concentrations of pyrite, sphalerite, galena and chalcopyrite are associated with the precious-metal phases.With the exception of two minor lodes, the mineralised breccias are localised along strike-slip faults which display changes in orientation indicative of D-, R- and P-shears and T-fractures, with individual segments ranging from a few metres to a few hundred metres in length. Two strike-slip fault systems are recognised, one sinistral, trending east-west and the other dextral, trending northwest, the latter of which is parallel to the Sumatran Fault System. The majority of gold and silver production is from breccias localised along faults formed during the sinistral tectonism. The breccias are believed to have been generated during compressional reactivation of the east-west sinistral strike-slip faults in response to the subduction of the Indian-Australian plate beneath Sumatra. Supralithostatic fluid pressures are a necessary pre-requisite for such reactivation, and the sudden drop in fluid pressure during reactivation is thought to have resulted in both the formation of the breccias by hydraulic fracturing, and the deposition of amorphous silica, precious metals and base metal sulphides. High rates of fluid flow subsequent to fracturing are thought to have led to fluidisation of the breccia clasts and abrasion to their current morphologies.Microthermometry of fluid inclusions in sphalerite indicates that the mineralising fluids were of low salinity, less than 3 wt% NaCl_equivalent, and that mineralisation took place at temperatures of 260–280°C. Variations of salinity and homogenisation temperature due to boiling are poorly developed, although if boiling occurred, the metalliferous minerals would have been deposited early in the boiling process before the fluid had cooled appreciably.     

Observations of fluid‐dependent shear‐wave splitting in synthetic porous rocks with aligned penny‐shaped fractures‡

P‐ and S‐wave velocity and attenuation coefficients (accurate to ±0.3% and ±0.2 dB/cm, respectively) were measured in synthetic porous rocks with aligned, penny‐shaped fractures using the laboratory ultrasonic pulse‐echo method. Shear‐wave splitting was observed by rotating the S‐wave transducer and noting the maximum and minimum velocities relative to the fracture direction. A block of synthetic porous rock of fracture density 0.0201 ± 0.0068 and fracture size 3.6 ± 0.38 mm (measured from image analysis of X‐ray CT scans) was sub‐sampled into three 20–30 mm long, 50 mm diameter core plugs oriented at 0°, 45° and 90° to the fracture normal (transversely isotropic symmetry axis). Full waveform data were collected over the frequency range 500–1000 kHz for both water and glycerin saturated cores to observe the effect of pore fluid viscosity at 1 cP and 100 cP, respectively. The shear‐wave splitting observed in the 90° core was 2.15 ± 0.02% for water saturated and 2.39 ± 0.02% for glycerin saturated, in agreement with the theory that suggests that the percentage splitting should be 100 times the fracture density and independent of the saturating fluid. In the 45° core, by contrast, splitting was 0.00 ± 0.02% for water saturation and ?0.77 ± 0.02% for glycerin saturation. This dependence on fracture orientation and pore fluid viscosity is consistent with the poro‐visco‐elastic theory for aligned, meso‐scale fractures in porous rocks. The results suggest the possible use of shear‐ or converted‐wave data to discriminate between fluids on the basis of viscosity variations.     

Nature, diversity of deposit types and metallogenic relations of South China

The South China Region is rich in mineral resources and has a wide diversity of deposit types. The region has undergone multiple tectonic and magmatic events and related metallogenic processes throughout the earth history. These tectonic and metallogenic processes were responsible for the formation of the diverse styles of base and precious metal deposits in South China making it one of the resource-rich regions in the world. During the Proterozoic, the South China Craton was characterised by rifting of continental margin before eruption of submarine volcanics and development of platform carbonate rocks, and the formation of VHMS, stratabound copper and MVT deposits. The Phanerozoic metallogeny of South China was related to opening and closing of the Tethyan Ocean involving multiple orogenies by subduction, back-arc rifting, arc–continent collision and post-collisional extension during the Indosinian (Triassic), Yanshanian (Jurassic to Cretaceous) and Himalayan (Tertiary) Orogenies. The Late Palaeozoic was a productive metallogenic period for South China resulting from break-up and rifting of Gondwana. Significant stratabound base and precious metal deposits were formed during the Devonian and Carboniferous (e.g., Fankou and Dabaoshan deposits). These Late Palaeozoic SEDEX-style deposits have been often overprinted by skarn systems associated with Yanshanian magmatism (e.g., Chengmenshan, Dongguashan and Qixiashan). A number of Late Palaeozoic to Early Mesozoic VHMS deposits also developed in the Sanjiang fold belt in the western part of South China (e.g., Laochang and Gacun).South China has significant sedimentary rock-hosted Carlin-like deposits, which occur in the Devonian- to Triassic-aged accretionary wedge or rift basins at the margin of the South China Craton. They are present in a region at the junction of Yunnan, Guizhou, and Guangxi Provinces called the ‘Southern Golden Triangle’, and are also present in NW Sichuan, Gansu and Shaanxi, in an area known as the ‘Northern Golden Triangle’ of China. These deposits are mostly epigenetic hydrothermal micron-disseminated gold deposits with associated As, Hg, Sb + Tl mineralisation similar to Carlin-type deposits in USA. The important deposits in the Southern Golden Triangle are Jinfeng (Lannigou), Zimudang, Getang, Yata and Banqi in Guizhou Province, and the Jinya and Gaolong deposits in Guangxi District. The most important deposits in the Northern Golden Triangle are the Dongbeizhai and Qiaoqiaoshang deposits.Many porphyry-related polymetallic copper–lead–zinc and gold skarn deposits occur in South China. These deposits are related to Indosinian (Triassic) and Yanshanian (Jurassic to Cretaceous) magmatism associated with collision of the South China and North China Cratons and westward subduction of the Palaeo-Pacific Plate. Most of these deposits are distributed along the Lower to Middle Yangtze River metallogenic belt. The most significant deposits are Tonglushan, Jilongshan, Fengshandong, Shitouzui and Jiguanzui. Au–(Ag–Mo)-rich porphyry-related Cu–Fe skarn deposits are also present (Chengmenshan and Wushan in Jiangxi Province and Xinqiao, Mashan-Tianmashan, Shizishan and Huangshilaoshan in Anhui Province). The South China fold belt extending from Fujian to Zhejiang Provinces is characterised by well-developed Yanshanian intrusive to subvolcanic rocks associated with porphyry to epithermal type mineralisation and mesothermal vein deposits. The largest porphyry copper deposit in China, Dexing, occurs in Jiangxi Province and is hosted by Yanshanian granodiorite. The high-sulphidation epithermal system occurs at the Zijinshan district in Fujian Province and epithermal to mesothermal vein-type deposits are also found in the Zhejiang Province (e.g., Zhilingtou). Part of Shandong Province is located at the northern margin of the South China Craton and the province has unique world class granite-hosted orogenic gold deposits. Occurrences of Pt–Pd–Ni–Cu–Co are found in Permian-aged Emeishan continental flood basalt (ECFB) in South China (Jinbaoshan and Baimazhai in Yunnan Province and Yangliuping in Sichuan Province). South China also has major vein-type tungsten–tin–bismuth–beryllium–sulphide and REE deposits associated with Yanshanian magmatism (e.g., Shizhuyuan and Xihuashan), important world class stratabound base metal–tin deposits (Dachang deposit), and the large antimony deposits (Xikuangshan and Woxi). During the Himalayan Orogeny, many giant deposits were formed in South China including the recently emerging Yulong and Gangdese porphyry copper belts in Tibet and the Ailaoshan orogenic gold deposits in Yunnan.