GEO空间碎片光度测量标定方法的研究

基于GEO卫星、太阳和观测站的空间几何关系,建立了消除太阳赤纬角对地球同步轨道( Geostationary Orbit,GEO)卫星光学特性的影响的方法.以三轴稳定GEO盒状卫星缩比模型为研究样本,在不同太阳赤纬角下进行仿真实验光度测量,研究太阳赤纬角和相位角的空间几何关系,得出消除太阳赤纬角对其辐亮度值以及以相位角...     

A comparison of different Gracilariopsis lemaneiformis (Rhodophyta) parts in biochemical characteristics,protoplast formation and regeneration

Gracilariopsis lemaneiformis is a commercially exploited alga. Its filaceous thallus can be divided into three parts, holdfast, middle segment and tip. The growth and branch forming trend and agar content of these three parts were analyzed, respectively, in this study. The results showed that the tip had the highest growth rate and branched most, although it was the last part with branch forming ability. The holdfast formed branches earliest but slowly. Holdfast had the highest agar content. We also assessed the difference in protoplast formation and regeneration among three parts. The middle segment displayed the shortest enzymolysis time and the highest protoplast yield; whereas the tip had the strongest vitality of protoplasts formation. Juvenile plants were only obtained from the protoplasts generated from the tip. These results suggested that the differentiation and function of G. lemaneiformis was different.     

Characterizing landscape spatial heterogeneity in multisensor images with variogram models

Most evaluation of the consistency of multisensor images have focused on Normalized Difference Vegetation Index （NDVI） products for natural landscapes, often neglecting less vegetated urban landscapes. This gap has been filled through quantifying and evaluating spatial heterogeneity of urban and natural landscapes from QuickBird, Satellite pour l＇observation de la Terre （SPOT）, Ad- vanced Spacebome Thermal Emission and Reflection Radiometer （ASTER） and Landsat Thematic Mapper （TM） images with variogram analysis. Instead of a logarithmic relationship with pixel size observed in the corresponding aggregated images, the spatial variability decayed and the spatial structures decomposed more slowly and complexly with spatial resolution for real multisensor im- ages. As the spatial resolution increased, the proportion of spatial variability of the smaller spatial structure decreased quickly and only a larger spatial structure was observed at very coarse scales. Compared with visible band, greater spatial variability was observed in near infrared band for both densely and less densely vegetated landscapes. The influence of image size on spatial heterogeneity was highly dependent on whether the empirical sernivariogram reached its sill within the original image size. When the empirical semivariogram did not reach its sill at the original observation scale, spatial variability and mean characteristic length scale would increase with image size; otherwise they might decrease. This study could provide new insights into the knowledge of spatial heterogeneity in real multisen- sor images with consideration of their nominal spatial resolution, image size and spectral bands.     

Discrete element modelling of material non‐coaxiality in simple shear flows

We investigate the quasi‐static simple shear flow of a two‐dimensional assembly of cohesionless particles using discrete element method (DEM) simulations. We focus on the unsteady flow regime where the solid would experience significant evolution of stresses, mobilised shear strength and dilation. We construct the DEM model using a discretised‐wall confined granular cell where the apparent boundary is allowed to dilate or contract synchronously with the confined solid. A rather uniform simple shear field is achieved across the whole assembly, which benefits rheological studies in generalising constitutive laws for continuum methods. We examine two aspects of the simple shear behaviour: macroscopic stress and strain rate evolution, particularly the non‐coaxiality between the principal directions of the two; and micromechanics such as evolution of fabric. For an initially anisotropic specimen sheared under constant normal pressure, the direction of principal stress rotates towards that of the principal strain rate, gradually reducing the degree of non‐coaxiality from about 45° to fluctuating around 0°. The rate in approaching coaxiality is slower in samples with larger initial porosity, stress ratio and mean stress. Generally, a faster rate in approaching coaxiality in simple shear is observed in a more dilatant sample, which often shows a larger degree of mobilised fabric anisotropy, suggesting the possible important role of instantaneous internal friction angle. The evolution of principal fabric direction resembles that of the principal stress direction. © 2013 The Authors. International Journal for Numerical and Analytical Methods in Geomechanics published by John Wiley & Sons, Ltd.     

A virtual experiment technique on the elementary behaviour of granular materials with discrete element method

Multi‐scale investigations aided by the discrete element method (DEM) play a vital role for current state‐of‐the‐art research on the elementary behaviour of granular materials. Similar to laboratory tests, there are three important aspects to be considered carefully, which are the proper stress/strain definition and measurement, the application of target loading paths and the designed experiment setup, to be addressed in the present paper. Considering the volume sensitive characteristics of granular materials, in the proposed technique, the deformation of the tested specimen is controlled and measured by deformation gradient tensor involving both the undeformed configuration and the current configuration. Definitions of Biot strain and Cauchy stress are adopted. The expressions of them in terms of contact forces and particle displacements, respectively, are derived. The boundary of the tested specimen consists of rigid massless planar units. It is suggested that the representative element uses a convex polyhedral (polygonal) shape to minimize possible boundary arching effects. General loading paths are described by directly specifying the changes in the stress/strain invariants or directions. Loading can be applied in the strain‐controlled mode by specifying the translations and rotations of the boundary units, or in the stress‐controlled mode by using a servo‐control mechanism, or in the combination of the two methods to realize mixed boundary conditions. Taking the simulation results as the natural consequences originated from a complex system, virtual experiments provide particle‐scale information database to conduct multi‐scale investigations for better understanding in granular material behaviours and possible development of the constitutive theories provided the qualitative similarity between the simulation results from virtual experiments and observations on real material behaviour. Copyright © 2011 John Wiley & Sons, Ltd.     

Magma underplating and Hannuoba present crust-mantle transitional zone composition: Xenolith petrological and geochemical evidence

Studies on the deep-seated xenoliths from global volcanoes reveal that the present petrological crust-mantle boundary between the lower crust and the upper mantle actually is a transitional layer from mainly mafic granulites to ultramafic spinel lher-zolites[1,2], i.e. a transitional zone distinctive from the seismological Moho[3]. Oceanic lithosphere crust- mantle transitional zone can be established from the study on the exposed ophiolites. However, as for the continental lithosphere, since …     

气象台站探测环境评估绘图软件设计与实现

文章重点介绍了＂气象台站探测环境评估绘图软件＂项目建设依据和目标、建设思路和原则、建设内容和实现的功能。＂气象台站探测环境评估绘图软件＂是一个集成气象部门地面、高空台站各类探测环境绘图方法,同时具有探测环境评价、评估功能的应用软件。     

A study of the microphysical processes in a numerically simulated heavy snowfall event in North China: the sensitivity of different snow intercept parameters

We performed a modeling study of the cloud processes in a heavy snowfall event occurring in North China on 20–22 December 2004. The nonhydrostatic Mesoscale Model (MM5) was used to carry out experiments with the Reisner-2 explicit microphysical parameterizations in four nested domains to test the sensitivity of simulated heavy snowfall to different snow intercept parameters. Results show that while the different intercept parameters do not significantly affect the accumulated snowfall amounts at the surface in either total amount or location, some microphysical characteristics of the modeled heavy snowfall event are impacted. The budget of cloud microphysics is analyzed to determine the dominant cloud processes. In the control experiment (CTL) with the snow intercept (N _os) specified as a function of temperature, the primary simulated hydrometeor is snow, and its mixing ratio is an order of magnitude larger than that of the other cloud species. Relative to CTL, the experiment with a fixed intercept (CON3E6) produced lower snow mixing ratios, more cloud water and graupel mixing ratios. Among the two experiments, while snowfall is slightly smaller in CON3E6, other processes like the rate of graupel fall, condensation and evaporation of cloud water, deposition and sublimation of graupel are all larger in CON3E6 than in CTL. Among CTL, CON3E6, and two more experiments (CON2E7: with a smaller fixed intercept; and NOSQS: N _os a function of snow mass mixing ratio), the budget shows that CON3E6 produces the smallest deposition and sublimation of snow, the largest deposition of cloud ice, and the largest conversion from cloud ice to snow.     

2008年11月黑龙江省3次较大降雪过程云图对比分析

本文针对2008年11月2日、13日和15日3次较大降雪天气过程,从卫星云图应用等方面分析了3种不同的云系在降雪过程中的演变情况,并结合700 hPa高空网进行分析.初步得出3种不同云系出现大降雪的一些特征.     

大连沙尘天气及预报模型分析

通过对位于东北亚沙尘暴天气下游的大连近7年的沙尘天气统计分析,以及应用天气学方法进行预报模型分析,揭示出大连地区沙尘的主要特征和预报着眼点.大连沙尘天气主要出现在春季,变化趋势同全国基本一致;沙尘天气的源地有4个,有三条影响路径.沙尘影响时,平均相对湿度都较低,以西北风为主.西北路径是影响大连地区产生沙尘天气最多的路径.在北路系统影响下,有三种天气类型;西路系统和西北路系统也分别有三种和四种天气类型.大连的沙尘天气预报着眼点首先要关注其上游的起沙情况,然后结合三路影响系统的预报模型进行分析;三路影响系统有不同的起沙关注区和不同的天气系统位置和移动方向.