Magnetostratigraphic evidence from the Cold Creek bar for onset of ice-age cataclysmic floods in eastern Washington during the Early Pleistocene

This study provides a detailed magnetostratigraphy of sediments composing the Cold Creek cataclysmic flood bar in the Pasco Basin, Washington. Our interpretation suggests onset of Missoula floods or similar events prior to 1.1 myr, later than previously suggested by Bjornstad et al. [Bjornstad, B.N., Fecht, K.R., Pluhar, C.J., 2001. Long history of pre-Wisconsin, Ice Age cataclysmic floods: evidence from southeastern Washington State. Journal of Geology 109 (6), 695-713]. Nonetheless these data suggest that Channeled Scabland features formed over a much longer timespan than commonly cited, that continental ice sheets of the early Pleistocene reached as far south as those of the late Pleistocene, and that similar physiography existed in eastern Washington and perhaps Montana to both generate and route Missoula-flood-like events. This study adds paleomagnetic polarity results from 213 new samples of silts and sands derived from nine new drill cores penetrating the Cold Creek cataclysmic flood bar to our previous database of 53 samples from four boreholes, resulting in a much more robust and detailed magnetostratigraphy. Rock magnetic studies on these sediments show pure magnetite to be the predominant remanence-carrying magnetic mineral, ruling out widespread remagnetization by secondary mineralization. The magnetostratigraphy at eastern Cold Creek bar is characterized by a normal polarity interval bracketed by reversed polarities. Equating the normal zone with the Jaramillo subchron (0.99-1.07 myr) affords the simplest correlation to the magnetic polarity timescale. Western Cold Creek bar was likely deposited during the Brunhes chron (0-0.78 myr) since it exhibits mainly normal polarities with only two thin reversed-polarity horizons that we interpret as magnetic excursions during the Brunhes.     

Biofouling and the continuous monitoring of underwater light from a seagrass perspective

For more than a decade, inexpensive electronic instruments have made continuous underwater light monitoring an integral part of many seagrass studies. Although biofouling, if not controlled, compromises the utility of the record. A year-long assessment of the time course of sensor fouling, in the Laguna Madre of Texas established that light transmitted through the fouling layer after 2 wk of exposure exceeded 90% except for a 6–8 wk period in May and June. On that basis, a 2-wk interval was chosen for routine servicing. Subsequent monitoring proved this choice to be grossly in error. The period of sub-90% transmittance after 2 wk extended to 4–6 mo annually over the next 3 yr. Fouling was strongly correlated with temperature, ambient light, and year. Since an algal bloom of 7-yr duration finally waned during this study, increased ambient light seemed most likely to explain increased fouling later in the study. The explanatory value of light was less than temperature or year in multiple regression, requiring some other explanation of the date effect than change in ambient light. Allelopathic and suspension-feeding depressant effects of the brown tide are offered as the most likely cause of unusually low fouling in the first year. Biofouling was so unpredictable and rapid in this study that at least weekly maintenance would be required to assure reliability of the light monitoring record.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

Subsidence in the super-deep Pattani and Malay basins of Southeast Asia: a coupled model incorporating lower-crustal flow in response to post-rift sediment loading

Two Early Cenozoic rifts in Southeast Asia (beneath the Pattani and Malay basins) experienced only limited upper-crustal extension (β≤1.5); yet very thick post-rift sequences are present, with 6–12 km of Late Cenozoic terrestrial and shallow-marine sediment derived from adjacent sources. Conventional post-rift backstripping requires depth-dependent lithospheric thinning by β=2–4 to explain these tremendous thicknesses. We assess an alternative explanation for this post-rift subsidence, involving lower-crustal flow from beneath these basins in response to lateral pressure-gradients induced by the sediment loads and the negative loads arising from the erosion of their sediment sources. We calculate that increased rates of erosion in western Thailand in the Early Miocene placed the crust in a non-steady thermal state, such that the depth (and thus, the pressure) at the base of the brittle upper crust subsequently varied over time. Following such a perturbation, thermal and mass-flux steady-state conditions took millions of years to re-establish. In the meantime, the lateral pressure-gradient caused net outflow of lower crust, thinning the crust beneath the depocentre by several kilometres (mimicking the isostatic effect of greater crustal extension having occurred beforehand) and thickening it beneath the sediment source region. The local combination of hot crust and high rates of surface processes, causing lower-crustal flow to be particularly vigorous and thus making its effects more readily identifiable, means that the Pattani and Malay basins represent a set of conditions different from basins in many other regions. However, lower-crustal flow induced by surface processes will also occur to some extent, but less recognisably, in many other continental crustal provinces, but its effects may be mistaken for those of other processes, such as larger-magnitude stretching and/or depth-dependent stretching.     

Flow and fracture maps for basaltic rock deformation at high temperatures

Understanding how the strength of basaltic rock varies with the extrinsic conditions of stress state, pressure and temperature, and the intrinsic rock physical properties is fundamental to understanding the dynamics of volcanic systems. In particular it is essential to understand how rock strength at high temperatures is limited by fracture. We have collated and analysed laboratory data for basaltic rocks from over 500 rock deformation experiments and plotted these on principal stress failure maps. We have fitted an empirical flow law (Norton’s law) and a theoretical fracture criterion to these data. The principal stress failure map is a graphical representation of ductile and brittle experimental data together with flow and fracture envelopes under varying strain rate, temperature and pressure. We have used these maps to re-interpret the ductile–brittle transition in basaltic rocks at high temperatures and show, conceptually, how these failure maps can be applied to volcanic systems, using lava flows as an example.     

Short‐term erosion rates from a 7Be inventory balance

Detailed soil erosion studies bene?t from the ability to quantify the magnitude of erosion over time scales appropriate to the process. An inventory balance for ⁷Be was used to calculate sediment erosion in a 30·73 m² plot during a series of runoff‐producing thunderstorms occurring over three days at the Deep Loess Research Station in Treynor, Iowa, USA. The inventory balance included determination of the pre‐ and post‐storm ⁷Be inventories in the soil, the atmospheric in?ux of ⁷Be during the event, and pro?les of the ⁷Be activity in the soil following the atmospheric deposition. The erosion calculated in the plot using the ⁷Be inventory balance was 0·058 g cm^?2, which is 23 per cent of the annual average erosion determined using ¹³⁷Cs inventories. The calculated erosion from the mass balance is similar to the 0·059 g cm^?2 of erosion estimated from the amount of sediment collected at the outlet of the 6 ha ?eld during the study period and the delivery ratio (0·64). The inventory balance of ⁷Be provides a new means for evaluating soil erosion over the time period most relevant to quantifying the prediction of erosion from runoff. Copyright © 2003 John Wiley & Sons, Ltd.     

Unusual biomarker maturation ratio changes through the oil window, a consequence of varied thermal history

Saturated and aromatic biomarker ratios continue to change systematically through the oil window and into the gas-condensate window to high vitrinite reflectances (R_o = 1.16%) in mature marine and lacustrine Mesozoic clastic samples from a South African basin. Two of the ratios reverse above R_o = 0.9%. These unusual maturation effects result from isolated periods of high rates of maturation increase. The basin cooled regionally after the break-up of Gondwana but high heating rates prevailed during the late Cretaceous-early Tertiary, as Africa moved across a hotspot, and again in the late Tertiary as a result of a possible hotspot and hydrothermal event.     

Erosion rates of alpine bedrock summit surfaces deduced from in situ Be and Al

We have measured the concentration of in situ produced cosmogenic ¹⁰Be and ²⁶Al from bare bedrock surfaces on summit flats in four western U.S. mountain ranges. The maximum mean bare-bedrock erosion rate from these alpine environments is 7.6 ± 3.9 m My⁻¹. Individual measurements vary between 2 and 19 m My⁻¹. These erosion rates are similar to previous cosmogenic radionuclide (CRN) erosion rates measured in other environments, except for those from extremely arid regions. This indicates that bare bedrock is not weathered into transportable material more rapidly in alpine environments than in other environments, even though frost weathering should be intense in these areas. Our CRN-deduced point measurements of bedrock erosion are slower than typical basin-averaged denudation rates ( 50 m My⁻¹). If our measured CRN erosion rates are accurate indicators of the rate at which summit flats are lowered by erosion, then relief in the mountain ranges examined here is probably increasing.

We develop a model of outcrop erosion to investigate the magnitude of errors associated with applying the steady-state erosion model to episodically eroding outcrops. Our simulations show that interpreting measurements with the steady-state erosion model can yield erosion rates which are either greater or less than the actual long-term mean erosion rate. While errors resulting from episodic erosion are potentially greater than both measurement and production rate errors for single samples, the mean value of many steady-state erosion rate measurements provides a much better estimate of the long-term erosion rate.