Observations of the countercurrent on the inshore side of the Kuroshio northeast of Taiwan

Intensive current measurements in the area northeast of Taiwan indicate subsurface, southwestward flow existed between the inshore edge of the Kuroshio and the East China Sea continental slope. At 70 km away from Taiwan, this countercurrent has a mean speed about 30 cm s^–1 at mid-depth. Closer to Taiwan, the flow turns along with the topography, and subjects to sidewall and bottom friction. Both the magnitude and the vertical shear of this countercurrent are comparable with that inferred from hydrographic survey. The wind field features short-period (a few days) fluctuations associated with the cold front passages, however, this is not reflected on the current records. It appears that the countercurrent is fairly steady. Together with similar reversing flow found at places much further to the north, the overall pattern seems to be a general quasi-steady feature along most part of the shelf edge of the East China Sea.     

Further evidence for non-reemergence of winter SST anomalies in the North Pacific eastern subtropical mode water area

Following our previous study (Sugimoto and Hanawa, 2005b), we further investigate the reason why reemergence of winter sea surface temperature anomalies does not occur in the North Pacific eastern subtropical mode water (NPESTMW) area, despite its occurrence in the North Pacific subtropical mode water and North Pacific central mode water areas. We use vertical temperature and salinity profiles of the World Ocean Circulation Experiment Hydrographic Program and Argo floats with high vertical and temporal resolution, together with heat flux data through the sea surface. We point out first that one of the causes for non-occurrence of reemergence is that the thickness of NPESTMW is very thin. In addition to this basic cause, two major reasons are found: a vigorous mixing in the lower portion of NPESTMW and less heat input from the atmosphere in the warming season. Since, in the lower portion of NPESTMW and deeper, the stratification is favorable for salt-finger type convection to occur compared with the other mode water areas, vigorous mixing takes place. This is confirmed by both a large Turner Angle there and the existence of staircase structures in vertical temperature and salinity profiles. From the viewpoint of heat input, the NPESTMW area gradually gains heat in the warming season compared with other mode water areas. As a result, NPESTMW cannot be capped so quickly by the shallow summer mixed layer, and water properties of NPESTMW are to be gradually modified, even in the upper portion.     

Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.     

Fishers' responses to management measures and their socio-economic effects

This session presented a wide range of papers on cooperativeresearch, design of alternative gears and fishing strategies,and new analyses to support management. The contributed papersreflected a real desire to explore different approaches andstrategies to fishery management. It is apparent that fishery policy has had a mixed record ofsuccess and failure at best. In most regions of the world, manystocks are still being overfished or have been severely overfishedin the past. Although rebuilding programmes for overfished stockshave been developed, nationally as well as internationally,only a few have been successful, many others are works in progressand, in too many cases, rebuilding     

A time-varying parameter model of a body oscillating in pitch

Among the assumptions upon which linear time-invariant models of floating bodies are based is that the body motions are so small that any change in the body’s angular position can be disregarded. However, it is often a major design requirement of a wave energy conversion device that the response amplitude is large, thereby invalidating one of the assumptions of the linear model. In particular, the immersed geometry of a body undergoes considerable variation when it is moved in pitch. With regard to this we investigate the difference in performance between a quasi-linear model in which the change of immersed surface is modelled by time-varying parameters and a basic linear model in which the immersed surface is time-invariant. The time-varying parameter model is realized by interpolation between the appropriate parameter values of a set of linear time-invariant (LTI) models derived for the different immersed surfaces that occur at discrete body displacements. It is shown that the responses predicted using the time-varying parameter model are closer to those measured experimentally than those of a standard frequency-domain model. Particular improvement occurs when the responses are large, such as at or near the resonance frequency. A problem which may limit the general use of the model is also discussed.     

A detailed geochemical and rock magnetic study of dredged basalt from the Sheba Ridge,Gulf of Aden

We report the results of petrological, geochemical and rock magnetic studies of basalt dredged from the eastern end of the west Sheba Ridge during cruise 11/1979 of R. R. S. Shackleton to the Western Gulf of Aden. The ridge is part of the Red Sea-Gulf of Aden spreading axis and the basalts are olivine tholeiites. The abundances of some elements are characteristic of normal MORB (mid-ocean ridge basalt) but other elemental abundances suggest affinites with transitional-type MORB.The observed magnetic properties are interpreted in terms of the composition, concentration and microstructure of the magnetic mineral fraction by recourse to the available data on synthetic analogues. The analysis has been carried out in greater detail than has been attempted in previous magneto-petrological studies. It appears that submarine weathering of the magnetic minerals (maghemitization) brings about not only the expected change in composition but also a fall in concentration of the magnetic fraction. This could result from the removal-of-iron oxidation mechanism operating in the submarine environment. It is also found that the fall in remanence with increasing degree of maghemitization is not explicable in terms of the change in composition and concentration of the magnetic minerals. A further influence—probably microstructural change—significantly reduces the remanence intensity.     

Behavioural Effects of Chemically Dispersed Oil and Subsequent Recovery in Diploria strigosa (Dana)

Abstract. Survival and behaviour of the hermatypic coral Diploria strigosa was studied during 6–24 h doses with water-accomodated fractions of chemically dispersed crude oil, and for a subsequent recovery period of 1 month. Experiments utilized a flow-through laboratory dosing procedure and incorporated petroleum hydrocarbon measurements in order to simulate a major but short-term oil spill in shallow subtidal benthic reef environments. Chemically dispersed oil treatments consisted of Arabian Light Crude oil with Corexit 9527 or BP1100WD at 1–20 ppm concentrations of oil.
In general, effects observed were sub-lethal, temporary, and associated with the highest concentrations tested. Responses to the presence of dispersed oil at 20ppm for 24 h included mesenterial filament extrusion, extreme tissue contraction, tentacle retraction and localized tissue rupture. The nature and severity of reactions during the dosing phase varied between colonies and treatments, but colonies typically resumed normal behaviour within 2 h to 4 d of the recovery period. It therefore seems unlikely that observed biological effects would impair long-term viability.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Evidence for methane and hydrogen sulfide venting imprinted on a Quaternary eolianite from southern Israel

Two different and physically separated chemosynthetic communities of bacteria are responsible for the formation of the Beeri native sulfur deposit hosted in a Late Quaternary sandstone on the southern coastal plain of Israel. The enriched concentrations are distributed over an area of about 1 km², within a zone 2–3 m thick at 1–13 m below surface. Two hundred fifty meters below the sulfur deposit, sulfur-reducing bacteria, thriving on methane generated in Neogene marls, reduced the Messinian gypsum to generate hydrogen sulfide, which subaqueously vented together with methane into the siliciclastic Quaternary sequence. Another, different chemosynthetic community ofBeggiatoa-like and unidentified bacteria oxidized the hydrogen sulfide into native sulfur and secondary gypsum, alunite, and iron sulfates. The coupled chemical and bacterial processes attributed to the formation of the sulfur deposit at Beeri are strikingly similar to the processes occurring today in the context of submarine hydrocarbon vents associated with the salt diapirs in the Gulf of Mexico.