Low reproductive success for copepods during a bloom of the non‐aldehyde‐producing diatom Cerataulina pelagica in the North Adriatic Sea

Egg production rates and/or hatching success in the copepods Acartia clausi, Calanus helgolandicus and Temora longicornis were negatively affected by a late spring (May–June 2003) phytoplankton bloom in the North Adriatic Sea, dominated mainly by the large diatom Cerataulina pelagica. Highest total concentrations of 3.3·10⁴ cells·ml^?1 were located in the vicinity of the Po River, which also corresponded to the area where the highest numbers of phaeophorbides were measured (0.779, 0.528 and 0.419 μg·l^?1, respectively, compared to an average of the remaining stations of 0.183 ± 0.049 SD), suggesting some grazing on the bloom. Phytoplankton biomass in terms of carbon was dominated by diatoms, representing on average 42% of total phytoplankton carbon and more than 80% at several stations. Cerataulina pelagica, Cyclotella spp., Chaetoceros spp. and small unidentified centric diatoms dominated the diatom community numerically but C. pelagica was by far the dominant diatom in terms of carbon due to its large cell size. This species represented more than 60% of the diatom biomass at nine of the 14 stations sampled, and was absent only at one station, which was the most offshore station sampled during the cruise. Although polyunsaturated aldehydes (PUAs) were not detected, other oxylipins which are hydroxy and keto derivatives of eicosapentaenoic and docosahexaenoic acids that affect copepod reproduction were found in these samples. Hence, we can attribute the negative impact of diatoms not only to PUAs, as previously believed, but also to these compounds. This is the first direct evidence of the presence of oxylipins other than PUAs in marine blooms dominated by diatoms.     

A spatial cross‐correlation model of spectral accelerations at multiple periods

Many seismic loss problems (such as disruption of distributed infrastructure and losses to portfolios of structures) are dependent upon the regional distribution of ground‐motion intensity, rather than intensity at only a single site. Quantifying ground‐motion over a spatially‐distributed region therefore requires information on the correlation between the ground‐motion intensities at different sites during a single event. The focus of the present study is to assess the spatial correlation between ground‐motion spectral accelerations at different periods. Ground motions from eight well‐recorded earthquakes were used to study the spatial correlations. On the basis of obtained empirical correlation estimates, we propose a geostatistics‐based method to formulate a predictive model that is suitable for simulation of spectral accelerations at multiple sites and multiple periods, in the case of crustal earthquakes in active seismic regions. While the calibration of this model and investigation of its implications were somewhat complex, the model itself is very simple to use for making correlation predictions. A user only needs to evaluate a simple equation relying on three sets of coefficients provided here to compute a correlation coefficient for spectral values at two periods and at a specified separation distance. These results may then be used in evaluating the seismic risk of portfolios of structures with differing fundamental periods. Copyright © 2012 John Wiley & Sons, Ltd.     

The geochemistry of gem opals as evidence of their origin

Seventy-seven gem opals from ten countries were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) through a dilution process, in order to establish the nature of the impurities. The results are correlated to the mode of formation and physical properties and are instrumental in establishing the geographical origin of a gem opal. The geochemistry of an opal is shown to be dependant mostly on the host rock, at least for examples from Mexico and Brazil, even if modified by weathering processes. In order of decreasing concentration, the main impurities present are Al, Ca, Fe, K, Na, and Mg (more than 500 ppm). Other noticeable elements in lesser amounts are Ba, followed by Zr, Sr, Rb, U, and Pb. For the first time, geochemistry helps to discriminate some varieties of opals. The Ba content, as well as the chondrite-normalized REE pattern, are the keys to separating sedimentary opals (Ba > 110 ppm, Eu and Ce anomalies) from volcanic opals (Ba < 110 ppm, no Eu or Ce anomaly). The Ca content, and to a lesser extent that of Mg, Al, K and Nb, helps to distinguish gem opals from different volcanic environments. The limited range of concentrations for all elements in precious (play-of-color) compared to common opals, indicates that this variety must have very specific, or more restricted, conditions of formation. We tentatively interpreted the presence of impurities in terms of crystallochemistry, even if opal is a poorly crystallized or amorphous material. The main replacement is the substitution of Si⁴⁺ by Al³⁺ and Fe³⁺. The induced charge imbalance is compensated chiefly by Ca²⁺, Mg²⁺, Mn²⁺, Ba²⁺, K⁺, and Na⁺. In terms of origin of color, greater concentrations of iron induce darker colors (from yellow to “chocolate brown”). This element inhibits luminescence for concentrations above 1000 ppm, whereas already a low content in U (≤ 1 ppm) induces a green luminescence.     

Mapping of erosion rates in marly badlands based on a coupling of anatomical changes in exposed roots with slope maps derived from LiDAR data

Black marls form very extensive outcrops in the Alps and constitute some of the most eroded terrains, thus causing major problems of sedimentation in artificial storage systems (e.g. reservoirs) and river systems. In the experimental catchments near Draix (France), soil erosion rates have been measured in the past at the plot scale through a detailed monitoring of surface elevation changes and at the catchment scale through continuous monitoring of sediment yield in traps at basin outlets. More recently, erosion rates have been determined by means of dendrogeomorphic techniques in three monitored catchments of the Draix basin. A total of 48 exposed roots of Scots pine have been sampled and anatomical variations in annual growth rings resulting from denudation analysed. At the plot scale, average medium‐term soil erosion rates derived from exposed roots vary between 1·8 and 13·8 mm yr^?1 (average: 5·9 mm yr^?1) and values are significantly correlated with slope angle. The dendrogeomorphic record of point‐scale soil erosion rates matches very well with soil erosion rates measured in the Draix basins. Based on the point‐scale measurements and dendrogeomorphic results obtained at the point scale, a linear regression model involving slope angle was derived and coupled to high‐resolution slope maps obtained from a LiDAR‐generated digital elevation model so as to generate high‐resolution soil erosion maps. The resulting regression model is statistically significant and average soil erosion rates obtained from the areal erosion map (5·8, 5·2 and 6·2 mm yr^?1 for the Roubine, Moulin and Laval catchments, respectively) prove to be well in concert with average annual erosion rates measured in traps at the outlet of these catchments since 1985 (6·3, 4·1 and 6·4 mm yr^?1). This contribution demonstrates that dendrogeomorphic analyses of roots clearly have significant potential and that they are a powerful tool for the quantification and mapping of soil erosion rates in areas where measurements of past erosion is lacking. Copyright © 2011 John Wiley & Sons, Ltd.     

Stratigraphic modelling of platform architecture and carbonate production: a Messinian case study (Sorbas Basin,SE Spain)

The late Messinian mixed carbonate‐siliciclastic platforms of the Sorbas Basin, known as the Terminal Carbonate Complex, record significant changes in carbonate production and geometry. Their facies and stratigraphic architecture result from complex interactions between base‐level fluctuations, evaporite deformation/dissolution and detrital inputs. A 3D quantitative approach (with DIONISOS software) is used to explore the basin‐scale platform architecture and to quantify the carbonate production of the Terminal Carbonate Complex. The modelling strategy consists in integrating detailed 2D field‐based transects and modern carbonate system parameters (e.g. carbonate production rates, bathymetric and hydrodynamic ranges of production). This approach limits user impact and so provides more objective output results. Tests are carried out on carbonate production rates, subsidence and evaporite deformation/dissolution. Numerical modelling provides accurate predictions of geometries, facies distributions and depositional sequence thicknesses, validated by field data. Comparative statistical testing of the field transects and of the various model outputs are used to discern the relative contribution of the parameters tested to the evolution of basin filling. The 3D visualization and quantification of the main carbonate producers (ooids and microbialites) are discussed in terms of changes in base‐level and detrital supply. This study demonstrates that base‐level fluctuations have the greatest impact on the carbonate budget. Evaporite deformation/dissolution affects the type and amount of carbonate production, inducing a transition from an ooid‐ to microbialite‐dominated system and also has a major effect on stratigraphic architecture by inducing the migration of depocentres. The numerical modelling results obtained using modern carbonate system parameters could also be applied to subsurface ooid‐microbialite reservoirs, and the Terminal Carbonate Complex is a good analogue for such systems.     

Prediction of the calcium carbonate budget in a sedimentary basin: A “source-to-sink” approach applied to Great Salt Lake,Utah, USA

Most source-to-sink studies typically focus on the dynamics of clastic sediments and consider erosion, transport and deposition of sediment particles as the sole contributors. Although often neglected, dissolved solids produced by weathering processes contribute significantly in the sedimentary dynamics of basins, supporting chemical and/or biological precipitation. Calcium ions are usually a major dissolved constituent of water drained through the watershed and may facilitate the precipitation of calcium carbonate when supersaturating conditions are reached. The high mobility of Ca²⁺ ions may cause outflow from an open system and consequently loss. In contrast, in closed basins, all dissolved (i.e. non-volatile) inputs converge at the lowest point of the basin. The endoreic Great Salt Lake basin constitutes an excellent natural laboratory to study the dynamics of calcium on a basin scale, from the erosion and transport through the watershed to the sink, including sedimentation in lake's waterbody. The current investigation focused on the Holocene epoch. Despite successive lake level fluctuations (amplitude around 10 m), the average water level seems to have not been affected by any significant long-term change (i.e. no increasing or decreasing trend, but fairly stable across the Holocene). Weathering of calcium-rich minerals in the watershed mobilizes Ca²⁺ ions that are transported by surface streams and subsurface flow to the Great Salt Lake (GSL). Monitoring data of these flows was corrected for recent anthropogenic activity (river management) and combined with direct precipitation (i.e. rain and snow) and atmospheric dust income into the lake, allowing estimating the amount of calcium delivered to the GSL. These values were then extrapolated through the Holocene period and compared to the estimated amount of calcium stored in GSL water column, porewater and sediments (using hydrochemical, mapping, coring and petrophysical estimates). The similar estimate of calcium delivered (4.88 Gt) and calcium stored (3.94 Gt) is consistent with the premise of the source-to-sink approach: a mass balance between eroded and transported compounds and the sinks. The amount of calcium deposited in the basin can therefore be predicted indirectly from the different inputs, which can be assessed with more confidence. When monitoring is unavailable (e.g. in the fossil record), the geodynamic context, the average lithology of the watershed and the bioclimatic classification of an endoreic basin are alternative properties that may be used to estimate the inputs. We show that this approach is sufficiently accurate to predict the amount of calcium captured in a basin and can be extended to the whole fossil record and inform on the storage of calcium.     

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.     

A Spatio‐Temporal Graph Model for Marine Dune Dynamics Analysis and Representation

Defining a model for the representation and the analysis of spatio‐temporal dynamics remains an open domain in geographical information sciences. In this article we investigate a spatio‐temporal graph‐based model dedicated to managing and extracting sets of geographical entities related in space and time. The approach is based on spatial and temporal local relations between neighboring entities during consecutive times. The model allows us to extract sets of connected entities distant in time and space over long periods and large spaces. From GIS concepts and qualitative reasoning on space and time, we combine the graph model with a dedicated spatial database. It includes information on geometry and geomorphometric parameters, and on spatial and temporal relations. This allows us to extend classical measurements of spatial parameters, with comparisons of entities linked by complex relations in space and time. As a case study, we show how the model suggests an efficient representation of dunes dynamics on a nautical chart for safe navigation.     

Cooling history of nested plutons from the Variscan Tichka plutonic complex (Morocco)

International Journal of Earth Sciences - Four imbricated mafic to felsic plutons of Variscan age from Morocco have been investigated for their cooling history and geochemical interactions with...     

Panta Rhei 2013–2015: global perspectives on hydrology,society and change

ABSTRACT

In 2013, the International Association of Hydrological Sciences (IAHS) launched the hydrological decade 2013–2022 with the theme “Panta Rhei: Change in Hydrology and Society”. The decade recognizes the urgency of hydrological research to understand and predict the interactions of society and water, to support sustainable water resource use under changing climatic and environmental conditions. This paper reports on the first Panta Rhei biennium 2013–2015, providing a comprehensive resource that describes the scope and direction of Panta Rhei. We bring together the knowledge of all the Panta Rhei working groups, to summarize the most pressing research questions and how the hydrological community is progressing towards those goals. We draw out interconnections between different strands of research, and reflect on the need to take a global view on hydrology in the current era of human impacts and environmental change. Finally, we look back to the six driving science questions identified at the outset of Panta Rhei, to quantify progress towards those aims.

Editor D. Koutsoyiannis; Associate editor not assigned