Evaluation and Monitoring of Service Quality: Discussing Ways to Meet INSPIRE Requirements

Service oriented architectures (SOA) are widely used nowadays. As the name implies such architectures rely on services. Germany developed a marine‐specific service oriented data infrastructure (MDI‐DE – Marine Dateninfrastruktur Deutschland) from 2010 to 2013. The services in MDI‐DE can contribute to fulfilling reporting commitments for various European and national legislation. The services of MDI‐DE (just like other services affected, for instance, by INSPIRE) have to meet specific requirements regarding performance, availability and conformity (quality of service, QoS). Although SOA is an important field in scientific research there are very few publications and studies available on QoS, especially regarding INSPIRE requirements. The services of MDI‐DE were analyzed using various existing tools. Their usefulness to reflect where either the aspect's performance, availability or conformity needs improvement was partly verified. Due to varying results and the neglect of some services for various reasons it can be stated that the more tools are used, the more conclusive the outcome. Furthermore, service quality was not coherent when measured with different tools. This means that measuring QoS in terms of INSPIRE will be very difficult to do in the future and there is the danger that people will choose the tools with which their services perform best.     

Monitoring selective availability dither frequencies and their effect on GPS data

Summary The signals transmitted by Block II satellites of the Global Positioning System (GPS) can be degraded to limit the highest accuracy of the system (10 m or better point positioning) to authorized users. This mode of degraded operation is called Selective Availability (S/A). S/A involves the degradation in the quality of broadcast orbits and satellite clock dithering. We monitored the dithered satellite oscillator and investigated the effect of this clock dithering on high accuracy relative positioning. The effect was studied over short 3-meter and zero-baselines with two GPS receivers. The equivalent S/A effects for baselines ranging from 0 to >10,000 km can be examined with short test baselines if the receiver clocks are deliberately mis-synchronized by a known and varying amount. Our results show that the maximum effect of satellite clock dithering on GPS double difference phase residuals grows as a function of the clock synchronization error according to: S/A _effect =0.04 cm/msec, and it increases as a function of baseline length like: S/A _effect =0.014 cm/100 km. These are equations for maximum observed values of post-fit residuals due to S/A. The effect on GPS baselines is likely to be smaller than the 0.14 mm for a baseline separation of 100 km. We therefore conclude, for our limited data set, and for the level of S/A during our tests, that S/A clock dithering has negligible effect on all terrestrial GPS baselines if double difference processing techniques are employed and if the GPS receivers remain synchronized to better than 10 msec. S/A may constitute a problem, however, if accurate point processing is required, or if GPS receivers are not synchronized. We suggest and test two different methods to monitor satellite frequency offsets due to S/A. S/A modulates GPS carrier frequencies in the range of-2 Hz to +2 Hz over time periods of several minutes. The methods used in this paper to measure the satellite clock dither could be applied by the civilian GPS community to continuously monitor S/A clock dithering. The monitored frequencies may aid high accuracy point positioning applications in a postprocessing mode (Malys and Ortiz 1989), and differential GPS with poorly synchronized receivers (Feigl et al. 1991).     

Development of a High Magnification Enlarger

Visual interpretation forms the basis for many operational applications of remote sensing. Suitable enlargement of remotely sensed data by optical projection is a basic requirement for visual interpretation. High Magnification Enlarger (HME) is a versatile interpretation aid developed for achieving wide-ranging scale transfer and variable-magnification display from a standard 24 cm format transparency. It operates on the principle of optical projection and is configured as a vertical column mounted unit. Low-distortion, high-quality enlarging lenses coupled with accuracy of alignment ensure accurate reproduction of the scale and the finer details from the input image transparency. Maximum user convenience is achieved by motorization of various controls.     

Extracting invariant characteristics of sketch maps: Towards place query‐by‐sketch

In geography, invariant aspects of sketches are essential to study because they reflect the human perception of real‐world places. A person's perception of a place can be expressed in sketches. In this article, we quantitatively and qualitatively analyzed the characteristics of single objects and characteristics among objects in sketches and the real world to find reliable invariants that can be used to establish references/correspondences between sketch and world in a matching process. These characteristics include category, shape, name, and relative size of each object. Moreover, quantity and spatial relationships—such as topological, ordering, and location relationships—among all objects are also analyzed to assess consistency between sketched and actual places. The approach presented in this study extracts the reliable invariants for query‐by‐sketch and prioritizes their relevance for a sketch‐map matching process.     

Syntectonic emplacement of the Middle Jurassic Concón Mafic Dike Swarm, Coastal Range, central Chile (33° S)

The Concón Mafic Dike Swarm (CMDS) consists of basaltic to andesitic dikes emplaced into deformed Late Paleozoic granitoids during the development of the Jurassic arc of central Chile. The dikes are divided into an early group of thick dikes (5–12 m) and a late group of thin dikes (0.5–3 m). Two new amphibole ⁴⁰Ar/³⁹Ar dates obtained from undeformed and deformed dikes, constrain the age of emplacement and deformation of the CMDS between 163 and 157 Ma. Based on radiometric ages, field observations, AMS studies and petrographic data, we conclude that the emplacement of the CMDS was syntectonic with the Jurassic arc extension and associated with sinistral displacements along the NW-trending structures that host the CMDS. The common occurrence of already deformed and rotated xenoliths in the dikes indicates that deformation in the granitoids started previously.The early thick dikes and country rocks appear to have been remagnetized during the exhumation of deep-seated coastal rocks in the Early Cretaceous (around 100 Ma). The remanent magnetization in late thin dikes is mainly retained by small amounts of low-Ti magnetite at high temperature and pyrrhotite at low temperature. The magnetization in these dikes appears to be primary in origin. Paleomagnetic results from the thin dikes also indicate that the whole area was tilted  23° to the NNW during cooling of the CMDS.The NNW–SSE extension vectors deduced from the paleomagnetic data and internal fabric of dikes are different with respect to extension direction deduced for the Middle–Late Jurassic of northern Chile, pointing to major heterogeneities along the margin of the overriding plate during the Mesozoic or differences in the mechanisms driving extension during such period.     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

Modelling fractionation of stable isotopes in stalagmites

High resolution δ¹³C and δ¹⁸O profiles recorded in precisely dated speleothems are widely used proxies for the climate of the past. Both δ¹³C and δ¹⁸O depend on several climate related effects including meteorological processes, processes occurring in the soil zone above the cave and isotope fractionation processes occurring in the solution layer on the stalagmite surface. Here we model the latter using a stalagmite isotope and growth model and determine the relationship between the stable isotope values in speleothem calcite and cave parameters, such as temperature, drip interval, water p_CO2 and a mixing coefficient describing mixing processes between the solution layer and the impinging drop.The evolution of δ¹³C values is modelled as a Rayleigh distillation process and shows a pronounced dependence on the residence time of the solution on the stalagmite surface and the drip interval, respectively. The evolution of δ¹⁸O values, in contrast, is also influenced by buffering reactions between the bicarbonate in the solution and the drip water driving the δ¹⁸O value of the bicarbonate towards the value expected for equilibrium isotope fractionation between drip water and calcite. This attenuates the dependence of the δ¹⁸O values on drip interval. The temperature dependence of δ¹⁸O, however, is more pronounced than for δ¹³C and in a similar range as expected for fractionation under equilibrium conditions.We also investigate the isotopic enrichment of the δ¹³C and δ¹⁸O values along individual growth layers and, thus, the slopes expected for Hendy tests. The results show that a positive Hendy test is only possible if isotope fractionation occurred under disequilibrium conditions. However, a negative Hendy test does not exclude that isotope fractionation occurred under disequilibrium conditions. A more reliable indicator for disequilibrium fractionation is the enrichment of the δ¹³C values along an individual growth layer.     

Eutrephoceras subplicatum (Steinmann, 1895) is a junior synonym of Eutrephoceras dorbignyanum (Forbes in Darwin, 1846) (Cephalopoda, Nautiloidea) from the Maastrichtian Quiriquina Formation of Chile

Nautilus subplicatusSteinmann, 1895 is a latest Cretaceous species of nautiloid which is common in southern South America (Chile, Argentina) and the Antarctic Peninsula and which is best assigned to the genus EutrephocerasHyatt, 1894. Nautilus dorbignyanusForbes in Darwin, 1846 and Nautilus valenciennii Hupé in Gay, 1854 are here considered to be senior synonyms which later authors have apparently overlooked. The type material of these two taxa is reillustrated. On the basis of this and additional material it is demonstrated that only a single nautiloid species occurs in the Quiriquina Formation of late Maastrichtian age. For this we propose to use N. dorbignyanus as the oldest available name.     

Post-breakup basaltic magmatism along the East Greenland Tertiary rifted margin

Mafic and ultramafic intrusions in East Greenland adjacent to the offshore Greenland–Iceland ridge were emplaced 5–9 My after continental breakup at 55 Ma [1]. Rare earth element (REE) concentrations determined by secondary ion mass spectrometry are reported for cumulus clinopyroxene from these intrusions, and the data are used to estimate REE abundance in equilibrium melts using available partitioning data. Estimated equilibrium melts from intrusions have strongly fractionated REE patterns with Nd/Dy(N) in the range 2 to 5.6 and Yb/Dy(N) 0.55 to 0.92, similar to values for coeval basalts. These melts have markedly higher Nd/Dy(N) than earlier breakup related flood basalts. The moderately low Yb/Dy(N) for the post-breakup volcanism is indicative of residual garnet in the source, while their high Nd/Dy(N) ratios can best be explained by aggregating low degree melts from a light-REE-enriched garnet- and spinel-bearing mantle source. We also report He, Sr, and Nd isotopic data for the intrusions. The highest ³He/⁴He ratios (>10 R/R_a) are found in the samples whose REE data reflect the largest proportion of melts from a garnet-bearing source, and having Sr and Nd isotopic compositions identical with the radiogenic Sr and unradiogenic Nd isotope end of the Iceland compositional field. There is no indication of a MORB-type mantle in the source of the intrusions. We postulate that post-breakup volcanism along the East Greenland coastline reflects the increasing proximity of the mantle plume to the East Greenland continental margin. The low degree of melting at high mean pressure inferred for the parental melts for the intrusions may reflect re-thickening of the lithosphere, which in turn was caused by the vigorous volcanism during breakup, with accompanying depletion of upper mantle and underplating of the crust at the continental margin.     

A modified method for biogenic silica determination

We describe a modified method for the determination of biogenic silica (BSi) in lacustrine sediment samples with BSi concentrations >0.5% SiO₂ (detection limit). To speed up the leaching procedure (48 samples per day), we suggest the use of Teflon autoclaves that can be left unattended (no stirring of the solution) for 3 h at 100°C in an oven. We suggest a volume correction by Na measurement to account for volume errors during pipetting off a hot solution. We also propose to carry out a correction for minerogenic silica by the simultaneous determination of Al in the leachate. Analytical precision and accuracy of the proposed method are 2.4% (relative standard deviation) and 70–110% recovery (relative to the mean of four international reference sediment samples), respectively. Additionally, we demonstrate that pre-treatment of the samples with H₂O₂ and/or HCl prior to alkaline leaching is not necessary for all samples. Due to the great diversity of lacustrine and marine sediments, however, the pre-treatment procedure should be tailored for samples from different sites.