High-P granulites of the Songshugou area (Qinling Orogen,east-central China): Petrography,phase relations,and U/Pb zircon geochronology

High-pressure (HP) granulites provide telling records of mineral reactions at upper mantle to lower crustal levels and key information on the fate of material in subduction systems. The latter especially applies when they abut eclogite and mantle dunite because such rock associations are crucial for understanding the incompletely known processes at the interface of converging plates. A continental arc, active c. 520–395 Ma ago, formed an enigmatic example of such a rock association in the Songshugou area, Qinling Orogen. To unravel the juxtaposition of the distinct rocks, this study combines petrography, phase equilibria modelling, conventional thermobarometry, and zircon U–Th–Pb–Ti–REE analysis. Two mafic HP granulites, which contain the mineral assemblages garnet–clinopyroxene–plagioclase–rutile–mesoperthite–quartz and garnet–clinopyroxene–plagioclase–rutile, experienced peak metamorphic conditions of ≤1.4 GPa, 860°C and ~1.3 GPa, ≥910°C, respectively. During decompression and cooling, at 489 ± 4 Ma, amphibole lamellae unmixed from a clinopyroxene solid solution and orthopyroxene in part replaced garnet. A felsic HP granulite shows equilibration of garnet, perthite, antiperthite, kyanite, quartz, and rutile at 810–860°C, ~1.2 GPa, sillimanite growth during decompression, and upper amphibolite facies cooling at 510 ± 4 Ma. Though the thermobarometric data are just within the methodological errors, the U/Pb zircon ages imply the HP granulites did not evolve coherently. The HP granulites either represent foundered lower arc crust or originated from subduction erosion because their geochemistry is indistinguishable from that of the hanging-wall plate. Published and new pressure–temperature–time–deformation paths converge at ~710°C, ~0.9 GPa, and ≲470 Ma, implying exhumation tectonics juxtaposed the HP granulites with a mélange of eclogite and mantle dunite at lower crustal levels. This study highlights that lower arc crust can comprise material of diverse evolution.     

Are carbonate barrier islands mobile? Insights from a mid to late-Holocene system,Al Ruwais,northern Qatar

Barrier islands are important landforms in many coastal systems around the globe. Studies of modern barrier island systems are mostly limited to those of siliciclastic realms, where the islands are recognized as mobile features that form on transgressive coastlines and migrate landward as sea-level rises. Barrier islands of the ‘Great Pearl Bank’ along the United Arab Emirates coast are the best-known carbonate examples. These Holocene islands, however, are interpreted to be anchored by older deposits and immobile. The mid-Holocene to late-Holocene depositional system at Al Ruwais, northern Qatar, provides an example of a mobile carbonate barrier island system, perhaps more similar to siliciclastic equivalents. Sedimentological and petrographic analyses, as well as ¹⁴C-dating of shells and biogenic remains from vibracored sediments and surface deposits, show that after 7000 years ago a barrier system with a narrow back-barrier lagoon formed along what is now an exposed coastal zone, while, contemporaneously, a laterally-extensive coral reef was forming immediately offshore. After 1400 years ago the barrier system was forced to step ca 3 km seaward in response to a sea-level fall of less than 2 m, where it re-established itself directly on the mid-Holocene reef. Since that time, the barrier has retreated landward as much as 1000 m to its current position, exposing previously-deposited back-barrier lagoonal sediment at the open-coast shoreline. In modern neritic warm-water carbonate settings mobile barrier island systems are rare. Their construction and migration may be inhibited by reef formation, early cementation, and the relative inefficiency of sourcing beach sediments from open carbonate shelves. Carbonate barrier island systems likely formed more commonly during geological periods when ramps and unrimmed shelves predominated and in calcite seas, when meteoric cementation was minimized as a result of initial calcitic allochem mineralogy. As with their siliciclastic analogues, however, recognition of the influence of these transient landforms in the rock record is challenging.     

Influence of Weathering on Pore Size Distribution of Soft Rocks

Geotechnical and Geological Engineering - Soft rocks can weather and lose their structure within a short time due to drying out and rewetting. Thus they are very sensitive to weathering. Since...     

Tracing the exhumation of the Eclogite Zone (Tauern Window,Eastern Alps) by <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of white mica in eclogites

New radiometric ages from the Subpenninic nappes (Eclogite Zone and Rote Wand – Modereck Nappe, Tauern Window) show that phengites formed under eclogite-facies metamorphic conditions retain their initial isotopic signature, even when associated lithologies were overprinted by greenschist- to amphibolite-facies metamorphism. Different stages of the eclogite-facies evolution can be dated provided ⁴⁰Ar/³⁹Ar dating is combined with micro-structural analyses. An age of 39 Ma from the Rote Wand – Modereck Nappe is interpreted to be close to the burial age of this unit. Eclogite deformation within the Eclogite Zone started at the pressure peak along distinct shear zones, and prevailed along the exhumation path. An age of ca. 38 Ma is only observed for eclogites not affected by subsequent deformation and is interpreted as maximum age due to the possible influence of homogenously distributed excess argon. During exhumation deformation was localised along distinct mylonitic shear zones. This stage is mainly characterised by the formation of dynamically recrystallized omphacite2 and phengite. Deformation resulted in the resetting of the Ar isotopic system within the recrystallized white mica. Flat argon release spectra showing ages of 32 Ma within mylonites record the timing of cooling along the exhumation path, and the emplacement onto the Venediger Nappe. Ar-release patterns and ³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar isotope correlation analyses indicate no significant ⁴⁰Ar-loss after initial closure, and only a negligible incorporation of excess argon. From the pressure peak onwards, eclogitic conditions prevailed for almost 8–10 Ma.     

Intra-oceanic settings of the western Mexico Late Jurassic-Early Cretaceous arc sequences. Implications for the Pacific-Tethys geodynamic relationships during the Cretaceous

Abstract

The Guerrero suspect terrane composed of Late Jurassic-Early Cretaceous sequences, extends from Baja California up to Acapulco and is considered to be coeval with the Late Mesozoic igneous and sedimentary arc sequences of the Greater Antilles, Venezuela and Western Cordillera of Colombia. New geological, petrological and geochemical data from central and southern Mexico, led us to propose a new model for the building of the Alisitos-Teloloapan arc. This arc, partly built on the Pacific oceanic lithosphere and partly on continental fragments, could be related to the subduction of an oceanic basin - the Arperos basin - under the Paleo-Pacific plate. This subduction was dipping southwest.

At the beginning of the magmatic activity of the oceanic segment of this arc, depleted tholeiitic basalts were emitted in a submarine environnement below the CCD. While subduction was going on, the arc magmas evolved from LREE depleted tholeiites to slightly LREE enriched tholeiites and then, to calc-alkaline basalts and andesites enriched in LREE and HFSE. Concurrently, the arc sedimentary environment changed from deep oceanic to neritic with the deposition of Aptian-Albian reefal limestones, at the end of the arc building. In the continent-based segment, the arc magmas are exclusively differentiated calc-alkaline suites depleted in HREE and Y, formed of predominantly siliceous lavas and pyroclastic rocks, emitted in a sub-aerial or shallow marine environment.

Thus, taking into account this above mentioned model, the Cretaceous volcanic series, accreted to the margins of cratonal America, in Colombia, Venezuela, Greater Antilles and Mexico, could be related to the same west-south-west dipping subduction of oceanic basins, fringing the North and South American continental cratons and connected directly with the inter-American Tethys. While the subduction was proceeding, this magmatic arc drifted towards the North and South American cratons and finally, collided with the continental margins at different periods during the Cretaceous.     

Experimental investigation into the influence of stratification on the passive earth pressure

In this paper, the effect of inhomogeneous soil condition on the passive earth pressure is studied by using model tests. The model tests are carried out with two soil layers. The tests are compared with the corresponding results for homogenous soil. The shear band formation is identified with Particle Image Velocimetry measurements.     

Sequential granite emplacement: a structural study of the late Variscan Strzelin intrusion, SW Poland

The Strzelin Massif in SW Poland (Central European Variscides) records a protracted igneous evolution, with three main magmatic stages: (1) tonalitic I, (2) granodioritic and (3) tonalitic II/granitic. In the northern part of this Massif, the Strzelin intrusion proper comprises three successively emplaced rock types: a medium-grained biotite granite (303 ± 2 Ma), a fine-grained biotite granite (283 ± 8 Ma) and a fine-grained biotite-muscovite granite; based on field evidence, the third variety postdates both types of the biotite granites. The structural data from the three granites, including their parallel, approximately E–W striking and steeply dipping lithological contacts and ENE–WSW trending subhorizontal magmatic lineations, suggest that the emplacement of all three successive granite varieties was controlled by an active, long-lived strike-slip fault, striking ESE–WNW, with a dextral sense of movement. After the emplacement of the youngest biotite-muscovite granite, the intrusion underwent brittle extension which produced “Q joints” striking NNW–SSE to N–S and dipping at 55–70° WSW to W, and showing evidence of broadly N–S directed sinistral displacements. The structural observations, supported by new geochronological data, indicate that the internal structure of the composite granitoid intrusion, including the faint magmatic foliation and lineation, formed in a long-lived strike-slip setting, different from the subsequent, post-emplacement extensional tectonics that controlled the development of brittle structures.     

Protoliths and phase petrology of whiteschists

Whiteschists appear in numerous high- and ultrahigh-pressure rock suites and are characterized by the mineral assemblage kyanite + talc (+-quartz or coesite). We demonstrate that whiteschist mineral assemblages are well stable up to pressures of more than 4 GPa but may already form at pressures of 0.5 GPa. The formation of whiteschists largely depends on the composition of the protolith, which requires elevated contents of Al and Mg as well as low Fe, Ca, and Na contents, as otherwise chloritoid, amphibole, feldspar, or omphacite are formed instead of kyanite or talc. Furthermore, the stability field of the whiteschist mineral assemblage strongly depends on XCO₂ and fO₂: already at low values of XCO₂, CO₂ binds Mg to carbonates strongly reducing the whiteschist stability field, whereas high fO₂ enlarges the stability field and stabilizes yoderite. Thus, the scarcity of whiteschist is not necessarily due to unusual P–T conditions, but to the restricted range of suitable protolith compositions and the spatial distribution of these protoliths: (1) continental sedimentary rocks and (2) hydrothermally and metasomatically altered felsic to mafic rocks. The continental sedimentary rocks that may produce whiteschist mineral assemblages typically have been deposited under arid climatic conditions in closed evaporitic basins and may be restricted to relatively low latitudes. These rocks often contain large amounts of the clay minerals palygorskite and sepiolite. Marine sediments generally do not yield whiteschist mineral assemblages as marine shales commonly have too high iron contents. Sabkha deposits may have too high CO₂ contents. Protoliths of appropriate geochemical composition occur in and on continental crust. Therefore, whiteschist assemblages typically are only found in settings of continental collision or where continental fragments were involved in subduction. Our calculations demonstrate that whiteschists can form by closed-system metamorphism, which implies that the chemical and isotopic composition of these rocks provide constraints on the development of the protoliths.     

On the evaluation of sediment transport models in tidal environments

The application of numerical models for the simulation of coastal hydro-and sediment dynamics requires model verification, calibration and validation with field data. Yet, no commonly accepted rules for the evaluation of sediment transport models exist. This paper discusses the significance of statistical parameters and their limitations considering common time lags in tidal environments. It is shown that the occasionally used discrepancy ratio lacks quantitative and qualitative information on model performance, as the time context information on time series characteristics is lost. As an initial measure of association, the simple linear correlation coefficient r² is proposed. To account for time lag errors in suspended transport models, a separate cross-correlation analysis for the flood and ebb tidal phase is proposed. For a comparison with other model applications, a concluding rating of model performance can be expressed by a dimensionless error definition which takes into account the quality of field data.     

The influence of recultivation technique and seed mixture on erosion stability after restoration in mountain environment

Control of erosion, and all of its after effects, from increased surface drainage and erosion to the formation of karst, is one of the essential problems when undertaking recultivation following necessary interventions in the sub-alpine and alpine vegetation stage (high zones). Average slope inclinations of 30–45% in the vicinity of ski runs, and far above in areas of natural erosion and avalanche zones, make restoration processes with sufficient erosion protection the prerequisite for success. Only a sufficient vegetation development of more than 70% ground cover stabilises the topsoil in the long term and reduces soil erosion to an acceptable degree. From 1999 to 2002, an international EU project with the participation of research groups and private firms from Austria, Italy and Germany was carried out under the direction of the Agricultural Research and Education Centre Raumberg-Gumpenstein (AREC) on five different Alpine sites at altitudes from 1,245 to 2,350 m above sea level. The aim of the work was the formulation of practice-relevant requirements for recultivation following intervention in high zones, especially following constructional measures in the vicinity of ski runs and lifts, torrent- and avalanche barriers. In a statistical comparison, the relationship between restoration techniques, seed mixtures of differing ecological value and vegetation cover was observed. The influence of application technique on erosion processes after restoration was obvious for the first two vegetation periods. Only with the additional use of mulch covers could increase surface drainage and noticeable soil loss be avoided. At high altitudes, the choice of seed mixture, irrespective of whether rapid or slow growing and independent of the extent of accompanying fertilisation, had no significance in the first two vegetation periods following sowing. In the following growing seasons, however, higher cover values were obtained with site-specific seed mixtures at three of the five experimental sites. While few species of the commercial seed mixture showed satisfactory persistency, most of the grasses and in particular the alpine leguminosae of site-specific seed mixtures increased their share during the observation period. In the long-term, sufficient protection against erosion is only guaranteed by the use of stable, enduring and ecologically adapted species.