A re-appraisal of the stratigraphy and volcanology of the Cerro Galán volcanic system,NW Argentina

From detailed fieldwork and biotite ⁴⁰Ar/³⁹Ar dating correlated with paleomagnetic analyses of lithic clasts, we present a revision of the stratigraphy, areal extent and volume estimates of ignimbrites in the Cerro Galán volcanic complex. We find evidence for nine distinct outflow ignimbrites, including two newly identified ignimbrites in the Toconquis Group (the Pitas and Vega Ignimbrites). Toconquis Group Ignimbrites (~5.60–4.51 Ma biotite ages) have been discovered to the southwest and north of the caldera, increasing their spatial extents from previous estimates. Previously thought to be contemporaneous, we distinguish the Real Grande Ignimbrite (4.68 ± 0.07 Ma biotite age) from the Cueva Negra Ignimbrite (3.77 ± 0.08 Ma biotite age). The form and collapse processes of the Cerro Galán caldera are also reassessed. Based on re-interpretation of the margins of the caldera, we find evidence for a fault-bounded trapdoor collapse hinged along a regional N-S fault on the eastern side of the caldera and accommodated on a N-S fault on the western caldera margin. The collapsed area defines a roughly isosceles trapezoid shape elongated E-W and with maximum dimensions 27 × 16 km. The Cerro Galán Ignimbrite (CGI; 2.08 ± 0.02 Ma sanidine age) outflow sheet extends to 40 km in all directions from the inferred structural margins, with a maximum runout distance of ~80 km to the north of the caldera. New deposit volume estimates confirm an increase in eruptive volume through time, wherein the Toconquis Group Ignimbrites increase in volume from the ~10 km³ Lower Merihuaca Ignimbrite to a maximum of ~390 km³ (Dense Rock Equivalent; DRE) with the Real Grande Ignimbrite. The climactic CGI has a revised volume of ~630 km³ (DRE), approximately two thirds of the commonly quoted value.     

Columnar jointing in vapor-phase-altered,non-welded Cerro Galán Ignimbrite,Paycuqui, Argentina

Columnar jointing is thought to occur primarily in lavas and welded pyroclastic flow deposits. However, the non-welded Cerro Galán Ignimbrite at Paycuqui, Argentina, contains well-developed columnar joints that are instead due to high-temperature vapor-phase alteration of the deposit, where devitrification and vapor-phase crystallization have increased the density and cohesion of the upper half of the section. Thermal remanent magnetization analyses of entrained lithic clasts indicate high emplacement temperatures, above 630°C, but the lack of welding textures indicates temperatures below the glass transition temperature. In order to remain below the glass transition at 630°C, the minimum cooling rate prior to deposition was 3.0 × 10⁻³–8.5 × 10⁻²°C/min (depending on the experimental data used for comparison). Alternatively, if the deposit was emplaced above the glass transition temperature, conductive cooling alone was insufficient to prevent welding. Crack patterns (average, 4.5 sides to each polygon) and column diameters (average, 75 cm) are consistent with relatively rapid cooling, where advective heat loss due to vapor fluxing increases cooling over simple conductive heat transfer. The presence of regularly spaced, complex radiating joint patterns is consistent with fumarolic gas rise, where volatiles originated in the valley-confined drainage system below. Joint spacing is a proxy for cooling rates and is controlled by depositional thickness/valley width. We suggest that the formation of joints in high-temperature, non-welded deposits is aided by the presence of underlying external water, where vapor transfer causes crystallization in pore spaces, densifies the deposit, and helps prevent welding.     

Seasonal controls on DOC dynamics in nested upland catchments in NE Scotland

Spatial and temporal variability of hydrological responses affecting surface water dissolved organic carbon (DOC) concentrations are important for determining upscaling patterns of DOC export within larger catchments. Annual and intra‐annual variations in DOC concentrations and fluxes were assessed over 2 years at 12 sites (3·40–1837 km²) within the River Dee basin in NE Scotland. Mean annual DOC fluxes, primarily correlated with catchment soil coverage, ranged from 3·41 to 9·48 g m^?2 yr^?1. Periods of seasonal (summer–autumn and winter–spring) DOC concentrations (production) were delineated and related to discharge. Although antecedent temperature mainly determined the timing of switchover between periods of high DOC in the summer‐autumn and low DOC in winter‐spring, inter‐annual variability of export within the same season was largely dependent on its associated water flux. DOC fluxes ranged from 1·39 to 4·80 g m^?2 season^?1 during summer–autumn and 1·43 to 4·15 g m^?2 season^?1 in winter–spring.Relationships between DOC areal fluxes and catchment scale indicated that mainstem fluxes reflect the averaging of highly heterogeneous inputs from contrasting headwater catchments, leading to convergent DOC fluxes at catchment sizes of ca 100 km². However, during summer–autumn periods, in contrast to winter–spring, longitudinal mainstem DOC fluxes continue to decrease, most likely because of increasing biological processes. This highlights the importance of considering seasonal as well as annual changes in DOC fluxes with catchment scale. This study increases our understanding of the temporal variability of DOC upscaling patterns reflecting cumulative changes across different catchment scales and aids modelling of carbon budgets at different stages of riverine systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Epifaunal worm tubes on Lower Jurassic (Lower Lias) ammonites from Dorset

Over 40 ammonites, mostly Promicroceras, with epifaunal worm tubes are described from the Lower Jurassic, Charmouth Mudstone Formation (Lias Group) of Dorset. Serpulids that were overgrown by the ammonites or responded to the ammonites’ growth attached to juvenile, living ammonites. Some epifaunal serpulids attached post-mortem, indicating oxygenated bottom water, which was rare in the lower Charmouth Mudstone Formation. Other serpulids do not conform to either pre- or post-mortem growth predictions and require individual assessment. The commonest pattern of growth for serpulids on live juvenile ammonites was attachment in the umbilical seam, with later growth onto, and finally around, the venter. Reconstructing this pattern shows that serpulids kept their aperture at 6 o’clock with respect to the orientation of the living ammonite (105-115° behind the ammonite aperture) throughout life. Reorientation of growth lines in serpulid worms just before the aperture suggests some worm tubes were fully grown. The 6 o’clock position of the aperture enabled feeding currents generated by the worms to parallel currents generated by swimming ammonites, thus maximizing food gathering and confirming that ammonites swam backwards. The mid-ventral position enabled the worm to deploy its branchia on both sides of the ammonite. Growth on ammonites was beneficial to the worms, but parasitic to the ammonites. Promicroceras with epifaunal worm tubes died at smaller sizes than unencumbered examples and size at death correlates inversely to extra weight of worm tubes. Uniformitarian comparisons suggest fossil serpulid worms grew in one season and that Promicroceras reached full size in two or three years.     

Critical issues for the calculation of the social cost of CO2: why the estimates from PAGE09 are higher than those from PAGE2002

PAGE09 is an updated version of the PAGE2002 integrated assessment model (Hope 2011a). The default PAGE09 model gives a mean estimate of the social cost of CO₂ (SCCO₂) of $106 per tonne of CO₂, compared to $81 from the PAGE2002 model used in the Stern review (Stern 2007). The increase is the net result of several improvements that have been incorporated into the PAGE09 model in response to the critical debate around the Stern review: the adoption of the A1B socio-economic scenario, rather than A2 whose population assumptions are now thought to be implausible; the use of ranges for the two components of the discount rate, rather than the single values used in the Stern review; a distribution for the climate sensitivity that is consistent with the latest estimates from IPCC 2007a; less adaptation than in PAGE2002, particularly in the economic sector, which was criticised for possibly being over-optimistic; and a more theoretically-justified basis of valuation that gives results appropriate to a representative agent from the focus region, the EU. The effect of each of these adjustments is quantified and explained.     

The use of the land-sea warming contrast under climate change to improve impact metrics

A favoured method of assimilating information from state-of-the-art climate models into integrated assessment models of climate impacts is to use the transient climate response (TCR) of the climate models as an input, sometimes accompanied by a pattern matching approach to provide spatial information. More recent approaches to the problem use TCR with another independent piece of climate model output: the land-sea surface warming ratio (φ). In this paper we show why the use of φ in addition to TCR has such utility. Multiple linear regressions of surface temperature change onto TCR and φ in 22 climate models from the CMIP3 multi-model database show that the inclusion of φ explains a much greater fraction of the inter-model variance than using TCR alone. The improvement is particularly pronounced in North America and Eurasia in the boreal summer season, and in the Amazon all year round. The use of φ as the second metric is beneficial for three reasons: firstly it is uncorrelated with TCR in state-of-the-art climate models and can therefore be considered as an independent metric; secondly, because of its projected time-invariance, the magnitude of φ is better constrained than TCR in the immediate future; thirdly, the use of two variables is much simpler than approaches such as pattern scaling from climate models. Finally we show how using the latest estimates of φ from climate models with a mean value of 1.6—as opposed to previously reported values of 1.4—can significantly increase the mean time-integrated discounted damage projections in a state-of-the-art integrated assessment model by about 15 %. When compared to damages calculated without the inclusion of the land-sea warming ratio, this figure rises to 65 %, equivalent to almost 200 trillion dollars over 200 years.     

Selecting the best performing fire weather indices for Austrian ecoregions

The interpretation and communication of fire danger warning levels based on fire weather index values are critical for fire management activities. A number of different indices have been developed for various environmental conditions, and many of them are currently applied in operational warning systems. To select an appropriate combination of such indices to work in different ecoregions in mountainous, hilly and flat terrain is challenging. This study analyses the performance of a total of 22 fire weather indices and two raw meteorological variables to predict wildfire occurrence for different ecological regions of Austria with respect to the different characteristics in climate and fire regimes. A median-based linear model was built based on percentile results on fire days and non-fire days to get quantifiable measures of index performance using slope and intercept of an index on fire days. We highlight the finding that one single index is not optimal for all Austrian regions in both summer and winter fire seasons. The summer season (May–November) shows that the Canadian build-up index, the Keetch Byram Drought Index and the mean daily temperature have the best performance; in the winter season (December–April), the M68dwd is the best performing index. It is shown that the index performance on fire days where larger fires appeared is better and that the uncertainties related to the location of the meteorological station can influence the overall results. A proposal for the selection of the best performing fire weather indices for each Austrian ecoregion is made.     

Application of rough set-based analysis to extract spatial relationship indicator rules: An example of land use in Pearl River Delta

Spatial relations, reflecting the complex association between geographical phenomena and environments, are very important in the solution of geographical issues. Different spatial relations can be expressed by indicators which are useful for the analysis of geographical issues. Urbanization, an important geographical issue, is considered in this paper. The spatial relationship indicators concerning urbanization are expressed with a decision table. Thereafter, the spatial relationship indicator rules are extracted based on the application of rough set theory. The extraction process of spatial relationship indicator rules is illustrated with data from the urban and rural areas of Shenzhen and Hong Kong, located in the Pearl River Delta. Land use vector data of 1995 and 2000 are used. The extracted spatial relationship indicator rules of 1995 are used to identify the urban and rural areas in Zhongshan, Zhuhai and Macao. The identification accuracy is approximately 96.3%. Similar procedures are used to extract the spatial relationship indicator rules of 2000 for the urban and rural areas in Zhongshan, Zhuhai and Macao. An identification accuracy of about 83.6% is obtained.